 |  | |||
 |
|  |
hey there i need sum help my 2000 euro r cl1 has be missing and backfiring for a few weeks now doesnt do it all the time seem like just when its underload taking off and s**t i put new leads on and the spark plug were mint but still missing hard my mate said its da egr vavle has anyone heard of this problem with a h22a motor? and do they know how to fix it any help would be greatfull
join the accorneo group there is a DIY to clean and block off the egr valve in there
200kw da6 monster
cheers mate do they have a website u know of ???
Accorneo Group is part of NZH, look under GROUPS.
Originally Posted by Nakai-San RAUH WELT Begriff
200kw da6 monster
I've got the same issue (F20B rather than H22A) but mines at idle and under load through the whole rev range. It's getting worse so I reckon it's either the igniter or the coil in the distributor. I put new plugs in, new leads, cleaned up cap and rotor (which look in good condition), clened the EGR and the IAC valves and problem persists. I also got the valve clearances checked and a compression test done and it was all within spec tolerances.
Ever since I moved to Hondas I've had issues.. a bit off-putting really.
i've got the same issues and only owned my euro r 9 months
i think what packs up in them is the igniter or coil but i'm not sure.
years ago when i had a f20b sir-t i ditched the coil and went to a msd external which improved it but not completely
it's got to be spark related and i just don't believe "the ecu is crap" argument.
I love my kids
A stab in the dark....Oxygen sensor.
Wasnt it proven to be an ecu problem? Aka, convert to Crome or Hondata and instant fix? Might have been for another issue, but im sure it solves something
i heard an rb/sr fixes these problems... LOL jokes.
considered getting a diagnostic ceck for all the sensors?
i hear pitstop are doing the mean exhaust jobs these days
Is there any kind of Honda OBDII scanner software for these (i know other car brands do, you can see sensor values etc)?
- Kelvin
✌
yes, i have used a normal obd2 scanner on my cl1 and it showed all sensor values for diagnosticz.
an ITR O2 sensor sorted my hesitation issues... its only been back twice in 2 yearsbut dont count on it fixing yours... could be anything.
CL1R
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
