how much to rebuild ITR block

CRZYSi · 3rd July 2008, 11:11 PM

Sorry guys but i just wanted to know the rough price range of how much would it be to rebuild an B18CR block .... i know some of your are engine builders or have done it .. i just wanted to know the rough price range ...

It just needs rings and bearing done ..

I know i can ask around but im only after rough price range ..

also if any recommdation(sp?) in auckland

Cheers

LS/VTEC · 4th July 2008, 05:53 PM

about 200 for parts. i think the bearings was 45 mains and 45 for big ends. they are acl bearings. rings are about 100. might pay to get the bores honed too which is about 80 if i remember right.

Coupe-R · 6th July 2008, 07:58 PM

forgetting a few things like headgasket etc.

i'd budget for closer to $500-1000 if you wanted to replace alot of things, i.e cambelt, waterpump, service in general, gaskets etc etc etc.

at least $500-$600 anyways

3rd July 2008, 11:11 PM	#1 (permalink)
CRZYSi Senior Member 6,000rpm (Max Torque) Join Date: Nov 2005 Posts: 1,511 Location: Manukau	how much to rebuild ITR block Sorry guys but i just wanted to know the rough price range of how much would it be to rebuild an B18CR block .... i know some of your are engine builders or have done it .. i just wanted to know the rough price range ... It just needs rings and bearing done .. I know i can ask around but im only after rough price range .. also if any recommdation(sp?) in auckland Cheers __________________ CRX VTEC - SOLD FS - J's RACING FRONT LIP for EF CRX - $200 SUPER CHEAP

4th July 2008, 05:53 PM	#2 (permalink)
LS/VTEC Senior Member 6,000rpm (Max Torque) Join Date: Feb 2005 Posts: 1,531 Location: Hamilton	Re: how much to rebuild ITR block about 200 for parts. i think the bearings was 45 mains and 45 for big ends. they are acl bearings. rings are about 100. might pay to get the bores honed too which is about 80 if i remember right.

6th July 2008, 07:58 PM	#3 (permalink)
Coupe-R Senior Member 9,000rpm (S2000 Redline!) Join Date: Apr 2002 Posts: 6,556 Location: Tauranga	Re: how much to rebuild ITR block forgetting a few things like headgasket etc. i'd budget for closer to $500-1000 if you wanted to replace alot of things, i.e cambelt, waterpump, service in general, gaskets etc etc etc. at least $500-$600 anyways

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where to rebuild your honda block??re-sleeving etc??	hsvtec	Hybrid	9	30th August 2006 07:48 PM
WTB B18C short block or long block WTB	toda	Parts Exchange	4	17th August 2006 09:08 PM
b20 Block rebuild ?	Civic_on_bumps	NA Tuning	41	8th April 2006 08:49 PM
long block?,short block?	chargedek	Tech Help	10	27th November 2005 09:29 PM
Big Block V8, no Small Block V8, no how about a tiny V8? Vid	Pdu-NZ	The Pub	3	27th June 2005 01:32 PM