Ignition Leads HELP!!

rokichiniko · 2nd July 2008, 11:10 PM

Hello, recently I've got a problem with my leads. one of them has been torned and It seems doesn't working properly.

So I'm planning to replace to the aftermarket with thickest leads.

I've read another forums about leads and many guys recommended to use STOCK HONDA LEADS!!

I don't much know about leads especially about electronical stuff. :

I'm thinking to get MSD, NGK or Nology HotWire. I've been looking for those 3 brands of products and NGK was the most common stuff which people using also MSD as well.

But I'm very keen about Nology HotWire which is following Nology HotWires

Can you give me an any advices?? then that will be so pleasure for me

mit5u · 2nd July 2008, 11:30 PM

Quote:

Originally Posted by rokichiniko

then that will be so pleasure for me

haha

any of them will work fine dude, just depends on how much you want to spend for fancy looking leads. ill be the first to admit I bought MSD leads because they were red

Horny_Devil · 3rd July 2008, 05:07 AM

read this: Stock ignition vs MSD

then make up ur mind

nemesisteg · 3rd July 2008, 07:33 AM

just buy what ever tickles your fancy- id put $20 on it that no matter what you buy they will work fine

itekdu · 3rd July 2008, 10:16 AM

2nd non-build thread in the build thread section I've noticed... You're on to it

rokichiniko · 3rd July 2008, 12:40 PM

Thanks guy for the advices!!

I was worried about very simple thing after I read each of the replys

PS: Also thanks for previous threads!! Many helps!!

Gudgen · 3rd July 2008, 05:39 PM

leads are leads. how come you dropped this in our build thread section?

XPLOIT · 3rd July 2008, 06:34 PM

Yea bud, try posting help HELP topics into the "Tech-Help" section.

Just get some 8mm NGK leads. Will work a treat.

3rd July 2008, 05:07 AM	#3 (permalink)
Horny_Devil Senior Member 18,000rpm+ Honda F1! Join Date: Jun 2002 Posts: 12,516 Location: Auckland	Re: Ignition Leads HELP!! read this: Stock ignition vs MSD then make up ur mind __________________ D Series Guru My Profile - My Website - My Build Thread V2.0

3rd July 2008, 07:33 AM	#4 (permalink)
nemesisteg Senior Member 7,000rpm (Peak Power) Join Date: Nov 2005 Posts: 2,946 Location: Cambridge	Re: Ignition Leads HELP!! just buy what ever tickles your fancy- id put $20 on it that no matter what you buy they will work fine

3rd July 2008, 10:16 AM	#5 (permalink)
itekdu Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,794 Location: Whangarei	Re: Ignition Leads HELP!! 2nd non-build thread in the build thread section I've noticed... You're on to it __________________ John said I could be the Whangaz mod if I put it in my sig \| Will be the fastest farm hack 'round \| bebo me \| Mens Almanac

3rd July 2008, 12:40 PM	#6 (permalink)
rokichiniko Junior Member 700rpm (Idle) Join Date: Jun 2008 Posts: 8 Location: Auckland	Re: Ignition Leads HELP!! Thanks guy for the advices!! I was worried about very simple thing after I read each of the replys PS: Also thanks for previous threads!! Many helps!!

3rd July 2008, 05:39 PM	#7 (permalink)
Gudgen Senior Member 6,000rpm (Max Torque) Join Date: Jul 2002 Posts: 2,465 Location: Dunedin	Re: Ignition Leads HELP!! leads are leads. how come you dropped this in our build thread section? __________________ B16A EF9 250BHP *\| "Owning an EF9 since ages ago!"*

3rd July 2008, 06:34 PM	#8 (permalink)
XPLOIT Senior Member 8,000rpm (B Series Redline!) Join Date: Apr 2007 Posts: 5,960 Location: Christchurch	Re: Ignition Leads HELP!! Yea bud, try posting help HELP topics into the "Tech-Help" section. Just get some 8mm NGK leads. Will work a treat. __________________ Profile - VTEC could cause serious illness, sometimes leading to kidney failure particularly in the very young, she said.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
msd ignition leads	ashwin	NA Tuning	2	21st May 2008 01:12 PM
ignition leads	nocert	Tech Help	3	18th February 2008 05:32 PM
ignition leads	lexstar	General Discussion	2	7th October 2004 04:49 PM
F/S NGK Ignition leads For ZC DOHC only	Shyracer	Parts Exchange	9	6th June 2004 03:27 PM
FS: BOSCH Ignition Leads (ZC)	Cyclone21	Parts Exchange	7	20th April 2003 01:38 AM