Exhaust Question

Chaos · 2nd July 2008, 04:18 PM

I am in a position where i must reduce the noise of my exhaust.

currently I have a 2.5" system, with 2 resos and a twin tip muffler. its sounds really nice and deep, and it would be good to retain that and get nowhere near the tinny sound a lot of hondas get

if i do anything i would like it to be easily removeable

I was told a CTR muffler would probably bolt on, and make it a lot quieter, whilst not losing power and still sounding good

is this true?

car is an h22a eg5.

mr_tec · 2nd July 2008, 04:31 PM

just had to see magoo about this aswell and this is what they suggest

Quote:

by replacing a resonatar(sp?) the air will still pass it too fast to do sfa so your better replacing the tip, and you should get a rough 20db decrease"

which puts me just around the legal limit

Chaos · 2nd July 2008, 04:33 PM

hmm yeah but what tip will fit on and sounds good?

Chaos · 3rd July 2008, 05:40 PM

bump any ideas on tips people?

Type S · 10th July 2008, 10:55 PM

i got the same problem, my exhaust is 98db back pressure which is above the limit of 95db. what is the best solution to reduce the exhaust noise? check out my post.

if i put another resonator, i dont know if it will reduce the noise and il just be wasting money.

mr_tec · 10th July 2008, 11:24 PM

well by installing an end muffler the back pressure ( gases ) go back up and fill the resonators with gas therefore making it quieter

2nd July 2008, 04:18 PM	#1 (permalink)
Chaos Senior Member 6,000rpm (Max Torque) Join Date: May 2007 Posts: 1,813 Location: Howick	Exhaust Question I am in a position where i must reduce the noise of my exhaust. currently I have a 2.5" system, with 2 resos and a twin tip muffler. its sounds really nice and deep, and it would be good to retain that and get nowhere near the tinny sound a lot of hondas get if i do anything i would like it to be easily removeable I was told a CTR muffler would probably bolt on, and make it a lot quieter, whilst not losing power and still sounding good is this true? car is an h22a eg5. __________________ Current: H22A EG5 Previous: H22A BB6

2nd July 2008, 04:33 PM	#3 (permalink)
Chaos Senior Member 6,000rpm (Max Torque) Join Date: May 2007 Posts: 1,813 Location: Howick	Re: Exhaust Question hmm yeah but what tip will fit on and sounds good? __________________ Current: H22A EG5 Previous: H22A BB6

3rd July 2008, 05:40 PM	#4 (permalink)
Chaos Senior Member 6,000rpm (Max Torque) Join Date: May 2007 Posts: 1,813 Location: Howick	Re: Exhaust Question bump any ideas on tips people? __________________ Current: H22A EG5 Previous: H22A BB6

10th July 2008, 10:55 PM	#5 (permalink)
Type S Junior Member 700rpm (Idle) Join Date: Jul 2008 Posts: 27 Location: Auckland	Re: Exhaust Question i got the same problem, my exhaust is 98db back pressure which is above the limit of 95db. what is the best solution to reduce the exhaust noise? check out my post. if i put another resonator, i dont know if it will reduce the noise and il just be wasting money.

10th July 2008, 11:24 PM	#6 (permalink)
mr_tec Senior Member 5,000rpm (VTEC Power!) Join Date: Jul 2007 Posts: 1,335 Location: Timaru	Re: Exhaust Question well by installing an end muffler the back pressure ( gases ) go back up and fill the resonators with gas therefore making it quieter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
exhaust piping question	Voo	Tech Help	0	3rd October 2007 03:54 PM
EF8 Exhaust Question	UI6YET	Tech Help	4	27th February 2006 06:27 PM
exhaust question..help help	mojask	Tech Help	0	28th January 2005 08:24 AM
Exhaust question	Horny_Devil	Tech Help	2	26th June 2004 04:51 PM
da6 exhaust question	kn	Tech Help	10	24th August 2002 01:27 AM