ignition barrel help

Cannabis · 28th June 2008, 04:40 PM

Hi There,

I drive a bb4 prelude. I have notice that my ignition barrel is not working properly. When i stopped the car then turned off the car, pulled the key out u know it's not right because it missing a click sound. and when you open the door the car will beep madly as it thinks the key is still in ignition. Also i think the steering wheel lock is not there as well. So is there a way to fix this? It still start the car up alright! If i change to a second hand ignition barrel then does that mean i have to use different key to start the car? Can i get some on the adjust the new barrel (if i bought one) with my old key?

Cheers

Mike

Tompen · 28th June 2008, 04:46 PM

I asked at Honda the other day about locks etc and they said they can do new locks or barrel and make it work with your current key. Probably charge and arm and a leg though

Cannabis · 28th June 2008, 04:56 PM

yea...i can imagine that. But after my build(halted at the moment as need to save for engine build) finished then my ignition barrel doesn't work properly and that really piss me off. The guy in Otahuhu setup my door lock not sure if they can do ignition! Maybe they will be my other choice?

dan_onlytwice · 30th June 2008, 01:13 PM

If you wanted to have the matching key all round, your best bet might be going to a wreckers, like pick-a-part here in Wellington (or whatever is similar up there) and pulling the locks from another bb4 that's been wrecked. Its not a hard job (as Im sure you know), and if the locks don't come with a key, any locksmith can just get the code from the locks and cut you a new key. I had to do it after my EF was thieved and it was not at hard as I thought. Cost 15 bucks plus 20 for the locks. Eashy.

Just my $0.02

Cannabis · 2nd July 2008, 07:40 PM

Thanks for the input! But didn't that mean i will have to have 2 keys for my car?
I am going to use the factory key for a while see if it's the copied key not good enough!
(although i have used the cut key for a long time)

FORDSKIN · 2nd July 2008, 08:20 PM

Locksmiths can work either way. Make a key for a existing barrel, or make the barrel work with the existing key. If you get a new barrel they will be able to make it work with the keys you already have.

Auckland Mobile locksmiths is a good company to deal with. 027 4989 048. He will come to you.

28th June 2008, 04:40 PM	#1 (permalink)
Cannabis Senior Member 3,000rpm (Grandma Drag) Join Date: Apr 2005 Posts: 360 Location: Auckland	ignition barrel help Hi There, I drive a bb4 prelude. I have notice that my ignition barrel is not working properly. When i stopped the car then turned off the car, pulled the key out u know it's not right because it missing a click sound. and when you open the door the car will beep madly as it thinks the key is still in ignition. Also i think the steering wheel lock is not there as well. So is there a way to fix this? It still start the car up alright! If i change to a second hand ignition barrel then does that mean i have to use different key to start the car? Can i get some on the adjust the new barrel (if i bought one) with my old key? Cheers Mike __________________ Life's too boring without cars and tobbaco. IF you can not tell the differences, you are the lucky one.

28th June 2008, 04:46 PM	#2 (permalink)
Tompen Senior Member 5,000rpm (VTEC Power!) Join Date: Sep 2005 Posts: 1,182 Location: Wellington	Re: ignition barrel help I asked at Honda the other day about locks etc and they said they can do new locks or barrel and make it work with your current key. Probably charge and arm and a leg though __________________ 1989 EF7 CRX Si - SOLD - For sale again.... 1989 EF8 CRX SiR Daily

28th June 2008, 04:56 PM	#3 (permalink)
Cannabis Senior Member 3,000rpm (Grandma Drag) Join Date: Apr 2005 Posts: 360 Location: Auckland	Re: ignition barrel help yea...i can imagine that. But after my build(halted at the moment as need to save for engine build) finished then my ignition barrel doesn't work properly and that really piss me off. The guy in Otahuhu setup my door lock not sure if they can do ignition! Maybe they will be my other choice? __________________ Life's too boring without cars and tobbaco. IF you can not tell the differences, you are the lucky one.

30th June 2008, 01:13 PM	#4 (permalink)
dan_onlytwice Senior Member 700rpm (Idle) Join Date: Jan 2008 Posts: 158 Location: Wellington	Re: ignition barrel help If you wanted to have the matching key all round, your best bet might be going to a wreckers, like pick-a-part here in Wellington (or whatever is similar up there) and pulling the locks from another bb4 that's been wrecked. Its not a hard job (as Im sure you know), and if the locks don't come with a key, any locksmith can just get the code from the locks and cut you a new key. I had to do it after my EF was thieved and it was not at hard as I thought. Cost 15 bucks plus 20 for the locks. Eashy. Just my $0.02

2nd July 2008, 07:40 PM	#5 (permalink)
Cannabis Senior Member 3,000rpm (Grandma Drag) Join Date: Apr 2005 Posts: 360 Location: Auckland	Re: ignition barrel help Thanks for the input! But didn't that mean i will have to have 2 keys for my car? I am going to use the factory key for a while see if it's the copied key not good enough! (although i have used the cut key for a long time) __________________ Life's too boring without cars and tobbaco. IF you can not tell the differences, you are the lucky one.

2nd July 2008, 08:20 PM	#6 (permalink)
FORDSKIN Senior Member 3,000rpm (Grandma Drag) Join Date: Oct 2006 Posts: 419 Location: Auckland	Re: ignition barrel help Locksmiths can work either way. Make a key for a existing barrel, or make the barrel work with the existing key. If you get a new barrel they will be able to make it work with the keys you already have. Auckland Mobile locksmiths is a good company to deal with. 027 4989 048. He will come to you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: EG ignition barrel	Rallyhonda	I.C.E./Electronics/Interior	2	20th June 2008 12:37 PM
WTD: ignition barrel with key	beowolf455	Parts Exchange	2	13th January 2008 12:40 PM
dc2 ignition barrel	ryan540	Tech Help	2	22nd July 2007 05:27 PM
WTD: EK ignition Key barrel	JC	Parts Exchange	5	7th December 2006 12:56 PM
WTB: ITR or DC2 Ignition Barrel	Twinshell	Parts Exchange	1	29th April 2006 09:46 AM