Clutch Not Disengaging - FIXED (See Final Comment) - Page 2

mulac · 2nd July 2008, 04:51 PM

OK, Just got a set of engine mounts, ready to chuck the motor back in to give it a go. Can anyone recommend a good quality urethane to pump into the mounts to strengthen it up a bit? Or wont it matter?

DC2r · 2nd July 2008, 05:05 PM

Quote:

Originally Posted by mulac

OK, Just got a set of engine mounts, ready to chuck the motor back in to give it a go. Can anyone recommend a good quality urethane to pump into the mounts to strengthen it up a bit? Or wont it matter?

Go to bunnings or total bodyshop supplies and get a tube of sikaflex, urathane stuff

BTLF3D · 2nd July 2008, 06:12 PM

carbond from bnt also works.

mulac · 3rd July 2008, 10:22 AM

Legends, I'll grab some Sikaflex today, put my motor in this weekend

and do some testing.

SK1TZ- EF · 4th July 2008, 11:55 AM

txt me if ya want broooo

mulac · 7th July 2008, 09:55 AM

All good. Motor is back in. But gear stick is WAY to far forward. seems like its in 1st when its in neutrel, thats how far forwared it is. Weird, going to take a better look at it tonight. After that just oil etc. Slave cylinder should be here soon (here's hoping)

TypeRMachinist · 10th July 2008, 03:31 PM

Keep me updated too im having same problems as you are...

mulac · 11th July 2008, 10:37 PM

Will do man, will update with progress at the end of the weekend

mulac · 16th July 2008, 07:29 AM

No luck guys. going to take it to the mechanics tomorrow and see how it goes.

Thanks

mulac · 7th August 2008, 02:40 PM

All right everyone. Solution found.

Due to having such a heavy duty pressure plate, the clutch pedal was Bending.

Every so slightly, it bent, just enough so I couldn't disengage the plate. So i tried and i tried, I bled it and u could use it till you'd pumped the clutch 3 or 4 times. then it would go again, then bled it again, then it would go again.

Thanks to Shred Industries, they tried this then realised that the clutch was bending more and more, so we bent it back, welded an extra bracket on, re-bled the clutch. Waalaa

All that time and effort. Finally.

Now the motors throwing out error codes, steerings all outta whack, cars shaking everywhere. Meh, all stuff I should be able to sort out myself though. Thanks for all of your help guys.

Cheers

Lycanthrope · 7th August 2008, 06:40 PM

Fark you must have one serious pressure plate if it bends the pedal

mulac · 7th August 2008, 07:07 PM

Ahaha 1800lbs

2nd July 2008, 04:51 PM	#26 (permalink)
mulac Senior Member 3,000rpm (Grandma Drag) Join Date: Jan 2004 Posts: 399 Location: Petone	Re: Clutch Not Disengaging [Pressure Plate/Clutch/Flywheel not problem] OK, Just got a set of engine mounts, ready to chuck the motor back in to give it a go. Can anyone recommend a good quality urethane to pump into the mounts to strengthen it up a bit? Or wont it matter? __________________ MuLaC EF9, Finaalllyy

2nd July 2008, 06:12 PM	#28 (permalink)
BTLF3D Senior Member 9,000rpm (S2000 Redline!) Join Date: Nov 2004 Posts: 6,730 Location: Levin	Re: Clutch Not Disengaging [Pressure Plate/Clutch/Flywheel not problem] carbond from bnt also works. __________________ Civic Turbo \| 11.8 @ 123mph \| Built B18C \| GT35R \| 319wkw \| 19psi Profile Supreme Antennas Skunk2 M&H Slicks F B I Performance Beyond 2 NZ Performance Speedfactor WorkshopX Speedtech NZ 41.co.nz Collier Motor Engineers Morrel Motors

3rd July 2008, 10:22 AM	#29 (permalink)
mulac Senior Member 3,000rpm (Grandma Drag) Join Date: Jan 2004 Posts: 399 Location: Petone	Re: Clutch Not Disengaging [Pressure Plate/Clutch/Flywheel not problem] Legends, I'll grab some Sikaflex today, put my motor in this weekend and do some testing. __________________ MuLaC EF9, Finaalllyy

4th July 2008, 11:55 AM	#30 (permalink)
SK1TZ- EF Senior Member 7,000rpm (Peak Power) Join Date: Aug 2006 Posts: 3,569 Location: Upper Hutt	Re: Clutch Not Disengaging [Pressure Plate/Clutch/Flywheel not problem] txt me if ya want broooo __________________ NEW JOB!--> www.blackwoodspaykels.co.nz Big thanks to all who have helped with muscle and info, you all know who ya are! WSC f0 LyF

7th July 2008, 09:55 AM	#31 (permalink)
mulac Senior Member 3,000rpm (Grandma Drag) Join Date: Jan 2004 Posts: 399 Location: Petone	Re: Clutch Not Disengaging [Pressure Plate/Clutch/Flywheel not problem] All good. Motor is back in. But gear stick is WAY to far forward. seems like its in 1st when its in neutrel, thats how far forwared it is. Weird, going to take a better look at it tonight. After that just oil etc. Slave cylinder should be here soon (here's hoping) __________________ MuLaC EF9, Finaalllyy

10th July 2008, 03:31 PM	#32 (permalink)
TypeRMachinist Senior Member 700rpm (Idle) Join Date: Apr 2008 Posts: 120 Location: Gisborne	Re: Clutch Not Disengaging [Pressure Plate/Clutch/Flywheel not problem] Keep me updated too im having same problems as you are... __________________ Teggy Type R + its red

11th July 2008, 10:37 PM	#33 (permalink)
mulac Senior Member 3,000rpm (Grandma Drag) Join Date: Jan 2004 Posts: 399 Location: Petone	Re: Clutch Not Disengaging [Pressure Plate/Clutch/Flywheel not problem] Will do man, will update with progress at the end of the weekend __________________ MuLaC EF9, Finaalllyy

16th July 2008, 07:29 AM	#34 (permalink)
mulac Senior Member 3,000rpm (Grandma Drag) Join Date: Jan 2004 Posts: 399 Location: Petone	Re: Clutch Not Disengaging [Pressure Plate/Clutch/Flywheel not problem] No luck guys. going to take it to the mechanics tomorrow and see how it goes. Thanks __________________ MuLaC EF9, Finaalllyy

7th August 2008, 02:40 PM	#35 (permalink)
mulac Senior Member 3,000rpm (Grandma Drag) Join Date: Jan 2004 Posts: 399 Location: Petone	Re: Clutch Not Disengaging [Pressure Plate/Clutch/Flywheel not problem] All right everyone. Solution found. Due to having such a heavy duty pressure plate, the clutch pedal was Bending. Every so slightly, it bent, just enough so I couldn't disengage the plate. So i tried and i tried, I bled it and u could use it till you'd pumped the clutch 3 or 4 times. then it would go again, then bled it again, then it would go again. Thanks to Shred Industries, they tried this then realised that the clutch was bending more and more, so we bent it back, welded an extra bracket on, re-bled the clutch. Waalaa All that time and effort. Finally. Now the motors throwing out error codes, steerings all outta whack, cars shaking everywhere. Meh, all stuff I should be able to sort out myself though. Thanks for all of your help guys. Cheers __________________ MuLaC EF9, Finaalllyy

7th August 2008, 06:40 PM	#36 (permalink)
Lycanthrope Senior Member 4,000rpm (Taxi Drag) Join Date: Feb 2007 Posts: 546 Location: Auckland	Re: Clutch Not Disengaging - FIXED (See Final Comment) Fark you must have one serious pressure plate if it bends the pedal

7th August 2008, 07:07 PM	#37 (permalink)
mulac Senior Member 3,000rpm (Grandma Drag) Join Date: Jan 2004 Posts: 399 Location: Petone	Re: Clutch Not Disengaging - FIXED (See Final Comment) Ahaha 1800lbs __________________ MuLaC EF9, Finaalllyy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cable clutch to hydraulic clutch	efp0wa	Tech Help	7	13th February 2008 09:14 PM
WTB: EF2 clutch	Demon	Parts Exchange	5	18th July 2006 01:06 AM
Here's a challenge!! Clutch shudder with 1 y.o. clutch	JDSRKT	Tech Help	15	9th May 2005 12:09 PM
Clutch not disengaging! help please :)	90CIVICSIR	Tech Help	4	1st May 2004 05:09 PM
Clutch	lude_dude69	Tech Help	3	17th August 2003 03:30 PM