breaks dc2 on ef7

[evilcr]

hey does anyone no if u can fit dc2/type r /ek sir front break assembly (hubs.discs.calipers) onto a crx ef7 do i have to change anything such as outer cvs?or will my std one fit?... :?: :?:

[Trench_Rat]

You will need to use either ef8/9 or da6 knuckles , the ef ones are better but hard to come by , the teg ones are 6 mm higher so they change your camber curve slightly but on a road car you wont even notice. Also if your putting bigger front brakes on you may wat to look at using da6 trailing arms and attached brakes on the rear other wise it will be a little unbalanced , then you will want to get a larger master cylinder so you can displace more fluid to fill the larger calipers , check out the junkyard upgrades thread in the hybrid section that will answer your questions.