|
 |
|  |
| |||||||
| Tech Help Discussion of problems, symptoms and fixes for your Honda |
 |
 | Thread Tools | Display Modes |
14th July 2004, 11:19 AM
| #1 (permalink) |
| Senior Member 700rpm (Idle)  Join Date: Apr 2002
Posts: 181
Location: Ahipara | EF CRX suspension bushes? Hey guys, the mighty C-rex failad its wof on the front lower arm bushes. Can you replace the bushes seperatly? or do you need to replace the whole arm on these suckers? thanks in advance.
__________________ www.nzv8mag.co.nz |
|  |
|
14th July 2004, 12:18 PM
| #2 (permalink) |
| Senior Member 700rpm (Idle) Join Date: Apr 2002
Posts: 181
Location: Ahipara | next issue of NZPC is free to who ever answers (with the correct answer that is) 
__________________ www.nzv8mag.co.nz |
|
| |
|
14th July 2004, 01:12 PM
| #3 (permalink) |
| Senior Member 7,000rpm (Peak Power)  Join Date: Jul 2003
Posts: 3,759
Location: Auckland   | |
|
| |
|
14th July 2004, 04:39 PM
| #4 (permalink) |
| Senior Member 9,000rpm (S2000 Redline!)  Join Date: Feb 2003
Posts: 6,144
Location: Auckland | yes the bushes can be replaced separately, you will need a press to get them in and out. They typically cost about $20-30 depending on where you get them from and if the are standard or urathane. If you have more than one to replace and think the ball joint may need replacing i would recommend you shop around, i found a crowd that had whole replacement lower arms with 2 new bushs and a new ball joint for about $99 / arm which is not bad when you add it up.
__________________ The Internet: where men are men, women are men, and children are FBI agents |
|
| |
|
| Thread Tools | |
| Display Modes | |
|
|
 |  |
Linear Mode
