DA6 ECU error code. what does all this flashing mean :-?

90CIVICSIR · 30th April 2004, 09:55 AM

hey guys, ive finally resurected my DA6 integra and its now running ok but the engne check light is coming on and the ecu is flashing at me

The flashes im getting are...

two long flashes and then three short flashes. Then..
one long and four short flashes

what does all this mean?

Thanks alot

songling · 30th April 2004, 10:19 AM

the two long and three short is your knock sensor.
and your one long and four short is IAC (EACV) - idle air control valve

Gudgen · 30th April 2004, 01:40 PM

yip..thats 23 and 14..
read up on this to help u understand the codes..
http://www.hondata.com/techecucodes.html

90CIVICSIR · 30th April 2004, 05:13 PM

Thanks alot guys. Could the sensors/valve need replacing? or could it be something elce causing them to go haywire

songling · 30th April 2004, 05:17 PM

well
hmm
my check light has coem up as well which is a code for the knock sensor.
i unpluged the sensor, pushed the wire hard into the plug and pluged it back in, re-set ecu and no mroe light

ill have 2 just see how things go over the next few days to see if it coems back

30th April 2004, 09:55 AM	#1 (permalink)
90CIVICSIR Senior Member 5,000rpm (VTEC Power!) Join Date: Jun 2002 Posts: 1,380 Location: Wellington	DA6 ECU error code. what does all this flashing mean :-? hey guys, ive finally resurected my DA6 integra and its now running ok but the engne check light is coming on and the ecu is flashing at me The flashes im getting are... two long flashes and then three short flashes. Then.. one long and four short flashes what does all this mean? Thanks alot __________________ ".....watching fate as it flows down the path we have chose..."

30th April 2004, 01:40 PM	#3 (permalink)
Gudgen Senior Member 6,000rpm (Max Torque) Join Date: Jul 2002 Posts: 2,465 Location: Dunedin	yip..thats 23 and 14.. read up on this to help u understand the codes.. http://www.hondata.com/techecucodes.html __________________ B16A EF9 250BHP *\| "Owning an EF9 since ages ago!"*

30th April 2004, 05:13 PM	#4 (permalink)
90CIVICSIR Senior Member 5,000rpm (VTEC Power!) Join Date: Jun 2002 Posts: 1,380 Location: Wellington	Thanks alot guys. Could the sensors/valve need replacing? or could it be something elce causing them to go haywire __________________ ".....watching fate as it flows down the path we have chose..."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30th April 2004, 10:19 AM	#2 (permalink)
songling Senior Member 5,000rpm (VTEC Power!) Join Date: Jun 2003 Posts: 1,305 Location: Wellington	the two long and three short is your knock sensor. and your one long and four short is IAC (EACV) - idle air control valve

30th April 2004, 05:17 PM	#5 (permalink)
songling Senior Member 5,000rpm (VTEC Power!) Join Date: Jun 2003 Posts: 1,305 Location: Wellington	well hmm my check light has coem up as well which is a code for the knock sensor. i unpluged the sensor, pushed the wire hard into the plug and pluged it back in, re-set ecu and no mroe light ill have 2 just see how things go over the next few days to see if it coems back