ek4 standard sway bar sizes?

Kelsonmassif · 24th March 2004, 10:49 PM

just a quick question.

how big are the front and rear sway bars on a ek4 (vti-r)

f:22?
r:18?

just got my hands on some f:27mm r:23mm. should be a good improvement

-KONIG- · 26th March 2004, 07:10 AM

Yeah man they should feel wicked... Where did you get those sizes from? just curious, i think your close with the standard sizes of the sway bar easy way to tell tho, pop your head underneath the car and look at the rubber bushes, on the side of them they have a little imprint of a number, and that is the size diameter in millimetres of the bore of the bush. This will be the same as the diameter of the sway bar.

Ive got civic type R swaybars on mine, upgrade to 26mm F and 22mm R,
Noticible improvement on standard shocks, holds real tight into corners, i think people under estimate how much they make a difference, especially for the price of them...

Kelsonmassif · 26th March 2004, 09:15 AM

yea im getting some whiteline sway bar tie bar combo.

they come with urethane bushes so it should be pretty interesting

im thinking the front sway bar might be abit over kill..... if so ill just use my stock front and put in the rear sway.

still a few weeks for them to get here, then its a couple weeks of "testing" before track day.

24th March 2004, 10:49 PM	#1 (permalink)
Kelsonmassif Senior Member 7,000rpm (Peak Power) Join Date: Mar 2003 Posts: 3,403 Location: Wellington	ek4 standard sway bar sizes? just a quick question. how big are the front and rear sway bars on a ek4 (vti-r) f:22? r:18? just got my hands on some f:27mm r:23mm. should be a good improvement __________________ 60% of the time, works every time

26th March 2004, 07:10 AM	#2 (permalink)
-KONIG- Senior Member 4,000rpm (Taxi Drag) Join Date: Feb 2004 Posts: 859 Location: Palmerston North	Yeah man they should feel wicked... Where did you get those sizes from? just curious, i think your close with the standard sizes of the sway bar easy way to tell tho, pop your head underneath the car and look at the rubber bushes, on the side of them they have a little imprint of a number, and that is the size diameter in millimetres of the bore of the bush. This will be the same as the diameter of the sway bar. Ive got civic type R swaybars on mine, upgrade to 26mm F and 22mm R, Noticible improvement on standard shocks, holds real tight into corners, i think people under estimate how much they make a difference, especially for the price of them... __________________ Ex B18CR EK! Buddyclub, Apexi, Mugen, AEM, Koni, 4.785 Final drive!

26th March 2004, 09:15 AM	#3 (permalink)
Kelsonmassif Senior Member 7,000rpm (Peak Power) Join Date: Mar 2003 Posts: 3,403 Location: Wellington	yea im getting some whiteline sway bar tie bar combo. they come with urethane bushes so it should be pretty interesting im thinking the front sway bar might be abit over kill..... if so ill just use my stock front and put in the rear sway. still a few weeks for them to get here, then its a couple weeks of "testing" before track day. __________________ 60% of the time, works every time

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode