NZHondas.com
Register FAQ Members List Calendar Mark Forums Read

Go Back   NZHondas.com > NZH - TardMe > Parts Exchange > Suspension/Handling
Reload this Page FS: 282mm Prelude discs and calipers

Suspension/Handling Shocks, Springs, Coilovers, Camber Kits, Spacers, Calipers, Rotors, Hubs, Complete Brake Kits, Lower/Upper Control Arms, Bushes, Roll Bars, etc.

Reply
 
Thread Tools Display Modes
Old 30th August 2008, 08:24 AM   #1 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
282mm Prelude discs and calipers
As per title,

Discs and calipers off a BB4 Prelude, was to be used on my ITR but that car has now sold, so they're up for grabs:

Discs have a small lip, but are within wear limits so will skim up fine. Can organise surface grinding for a small fee if buyer requests.

$100 takes the lot.

Cheers
Snoozin is offline   Reply With Quote
Old 30th August 2008, 03:26 PM   #2 (permalink)
Trench_Rat
Senior Member
5,000rpm (VTEC Power!)
 
Trench_Rat's Avatar
 
Join Date: Oct 2004
Posts: 1,101
Location: Palmerston North
Feedback: 1 / 100%
Re: 282mm Prelude discs and calipers
u got pm
__________________
the only difference between genius and stupidity is genius has limits
Trench_Rat is offline   Reply With Quote
Old 31st August 2008, 02:17 PM   #3 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
Sold pending payment.
Snoozin is offline   Reply With Quote
Old 4th September 2008, 05:11 PM   #4 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
Back for sale, buyer unable to purchase.

$110 shipped anywhere in the North Island.
Snoozin is offline   Reply With Quote
Old 6th September 2008, 10:06 AM   #5 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
Hey guys, bump!
Snoozin is offline   Reply With Quote
Old 6th September 2008, 02:43 PM   #6 (permalink)
ITR_cam
Senior Member
5,000rpm (VTEC Power!)
 
ITR_cam's Avatar
 
Join Date: Oct 2006
Posts: 1,286
Location: Pukekohe
Feedback: 6 / 100%
Send a message via MSN to ITR_cam
Re: 282mm Prelude discs and calipers
can you please help me by telling me the min wear limit.. i dont want to take mine off to check on the back of them.. thanks BUMP!
ITR_cam is offline   Reply With Quote
Old 6th September 2008, 03:17 PM   #7 (permalink)
erichns
Senior Member
700rpm (Idle)
 
erichns's Avatar
 
Join Date: Mar 2007
Posts: 154
Location: Auckland
Feedback: 0 / 0%
Re: 282mm Prelude discs and calipers
21mm should be the minimum thickness, they're 23mm when new.
erichns is offline   Reply With Quote
Old 6th September 2008, 04:30 PM   #8 (permalink)
ITR_cam
Senior Member
5,000rpm (VTEC Power!)
 
ITR_cam's Avatar
 
Join Date: Oct 2006
Posts: 1,286
Location: Pukekohe
Feedback: 6 / 100%
Send a message via MSN to ITR_cam
Re: 282mm Prelude discs and calipers
thanks eric
ITR_cam is offline   Reply With Quote
Old 8th September 2008, 07:50 AM   #9 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
Thump!!!
Snoozin is offline   Reply With Quote
Old 10th September 2008, 09:01 AM   #10 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
Smash! Cheap upgrade for NIMM!
Snoozin is offline   Reply With Quote
Old 10th September 2008, 09:09 AM   #11 (permalink)
2OBESE
Senior Member
3,000rpm (Grandma Drag)
 
2OBESE's Avatar
 
Join Date: Mar 2007
Posts: 207
Location: Wellington
Feedback: 0 / 0%
Re: 282mm Prelude discs and calipers
Do you know if the ABS calipers are different to Non ABS?
2OBESE is offline   Reply With Quote
Old 10th September 2008, 09:37 AM   #12 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
To the best of my knowledge there is no difference, ie. these were off a Prelude without ABS which were going onto a DC2 with ABS, and I have seen it done before.
Snoozin is offline   Reply With Quote
Old 10th September 2008, 09:41 AM   #13 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
Also, I have just been asked if these will fit under a 15" buddyclub wheel with +45 offset... assuming it's a P1 or one of the P1 variants. Does anyone have experience with this and can confirm the spokes will clear the caliper?
Snoozin is offline   Reply With Quote
Old 10th September 2008, 02:21 PM   #14 (permalink)
BTLF3D
Senior Member
9,000rpm (S2000 Redline!)
 
BTLF3D's Avatar
 
Join Date: Nov 2004
Posts: 6,966
Location: Levin
Feedback: 0 / 0%
Send a message via MSN to BTLF3D
Re: 282mm Prelude discs and calipers
Quote:
Originally Posted by 2OBESE View Post
Do you know if the ABS calipers are different to Non ABS?
they are the same.
__________________
Civic Turbo | 11.8 @ 123mph | Built B18C | GT35R | 319wkw | 19psi Profile Supreme Antennas Skunk2 M&H Slicks F B I Performance Beyond 2 NZ Performance Speedfactor WorkshopX Speedtech NZ 41.co.nz Collier Motor Engineers Morrel Motors
BTLF3D is offline   Reply With Quote
Old 10th September 2008, 08:43 PM   #15 (permalink)
888
Senior Member
700rpm (Idle)
 
888's Avatar
 
Join Date: Aug 2008
Posts: 186
Location: Auckland
Feedback: 1 / 100%
Re: 282mm Prelude discs and calipers
Can these disc fit with ITR 96Spec wheels?

888 is offline   Reply With Quote
Old 10th September 2008, 08:46 PM   #16 (permalink)
b_series_power
Senior Member
7,000rpm (Peak Power)
 
b_series_power's Avatar
 
Join Date: Dec 2006
Posts: 2,617
Location: Hamilton
Feedback: 2 / 100%
Send a message via MSN to b_series_power
Re: 282mm Prelude discs and calipers
^^ you need to get spacers to get itr wheels to fit
__________________
jdmstu, EVLVTC build, bebo add me 0273180541
b_series_power is offline   Reply With Quote
Old 15th September 2008, 12:24 PM   #17 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
Bump!!!
Snoozin is offline   Reply With Quote
Old 30th September 2008, 07:02 AM   #18 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
Back to the top! I can bring these to NIMM if anyone is keen.
Snoozin is offline   Reply With Quote
Old 30th September 2008, 07:18 AM   #19 (permalink)
Bananaman
Senior Member
8,000rpm (B Series Redline!)
 
Bananaman's Avatar
 
Join Date: Jun 2004
Posts: 4,328
Location: Foxton Beach
Feedback: 4 / 100%
Re: 282mm Prelude discs and calipers
Do me a deal Rich
__________________
It is better to have a Honda and no Money,
than it is to have Money and no Honda.
Bananaman is offline   Reply With Quote
Old 30th September 2008, 07:38 AM   #20 (permalink)
Snoozin
Senior Member
5,000rpm (VTEC Power!)
 
Snoozin's Avatar
 
Join Date: Apr 2007
Posts: 1,293
Location: Palmerston North
Feedback: 3 / 100%
Send a message via MSN to Snoozin
Re: 282mm Prelude discs and calipers
What kind of a deal do you want?

PM me an offer if you're keen
Snoozin is offline   Reply With Quote
Old 30th September 2008, 12:06 PM   #21 (permalink)
DC2r
Senior Member
7,000rpm (Peak Power)
 
DC2r's Avatar
 
Join Date: Sep 2005
Posts: 3,294
Location: Wellington
Feedback: 21 / 100%
Re: 282mm Prelude discs and calipers
would these work fine with standard dc2 master cylinder?
__________________
**1997 EK4 Si B18c Turbo for sale |204kw|@8psi|wof|rego $9500**
DC2r is offline   Reply With Quote
Old 30th September 2008, 12:35 PM   #22 (permalink)
Colza
Senior Member
7,000rpm (Peak Power)
 
Colza's Avatar
 
Join Date: Jul 2004
Posts: 2,698
Location: Palmerston North
Feedback: 1 / 100%
Send a message via MSN to Colza
Re: 282mm Prelude discs and calipers
Yes they will.
__________________
I'm in ur loop, iterating ur variable!
Colza is online now   Reply With Quote
Old 30th September 2008, 05:16 PM   #23 (permalink)
BTLF3D
Senior Member
9,000rpm (S2000 Redline!)
 
BTLF3D's Avatar
 
Join Date: Nov 2004
Posts: 6,966
Location: Levin
Feedback: 0 / 0%
Send a message via MSN to BTLF3D
Re: 282mm Prelude discs and calipers
Quote:
Originally Posted by Colza View Post
Yes they will.
but... your pedal will go down more before you actually have pedal feel. Matt i have a 1" MC that will work good with these if you want it cheap.
__________________
Civic Turbo | 11.8 @ 123mph | Built B18C | GT35R | 319wkw | 19psi Profile Supreme Antennas Skunk2 M&H Slicks F B I Performance Beyond 2 NZ Performance Speedfactor WorkshopX Speedtech NZ 41.co.nz Collier Motor Engineers Morrel Motors
BTLF3D is offline   Reply With Quote
Old 1st October 2008, 03:45 PM   #24 (permalink)
Ped Rac3r
Senior Member
3,000rpm (Grandma Drag)
 
Ped Rac3r's Avatar
 
Join Date: Mar 2007
Posts: 456
Location: Auckland
Feedback: 2 / 100%
Send a message via MSN to Ped Rac3r
Re: 282mm Prelude discs and calipers
Will these fit inside the standard DC2 wheels? You got a PM also..
__________________
Quote:
Originally Posted by badcf4
id still hit it coz she'd go off like an A bomb in hiroshima
Ped Rac3r is offline   Reply With Quote
Old 1st October 2008, 03:57 PM   #25 (permalink)
brenth
Senior Member
5,000rpm (VTEC Power!)
 
brenth's Avatar
 
Join Date: Feb 2006
Posts: 1,176
Location: Auckland
Feedback: 7 / 100%
Send a message via MSN to brenth
Re: 282mm Prelude discs and calipers
Quote:
Originally Posted by Ped Rac3r View Post
Will these fit inside the standard DC2 wheels? You got a PM also..
yep ive got 98spec itr callipers and it clears oem dc2 wheels, only by the slightest of margins however
brenth is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off
Forum Jump

Similar Threads