DC SPORTS HEADERS!!! *H22A PIC UP*

[EVLTEK FBI AKL]

I have access to a very limited supply of DC Sports from a distributor who is winding things up.

DC SPORTS

B18C (will fit b16 but a bit lower)
4-1 Ceramic Race header with 2 1/2 collector - $675
4-1 Stainless header with USDM 2" collector - $495

B16A (will not fit b18)
4-1 Ceramic header with USDM 2" collector - $625

H22A (will require mods for F20b/CL1)
4-2-1 Stainless - $645
4-2-1 Ceramic - $625







H23A
4-2-1 Ceramic - $595

PACE SETTER - USA BRAND

F22B
4-2-1 I think stainless but will check - $425

ZC/D series
4-2-1 I think stainless but will check - $400

B16A
4-2-1 Ceramic - $585

[Ped Rac3r]

What size is the collector on the Pace Setter for the D?

[EVLTEK FBI AKL]

will be 2 inch also - i have yet to see a D/ZC header bigger

[Air2there]

Hi Adam, are the H22A Headers 2 1/2 collector? If so, could you put some SS ones aside for me please :evil:

To bad NZH aren't accepting members at the moment...... :cry:

[EVLTEK FBI AKL]

sorry man they are 2inch also - I have never seen a set of 2 1/2" H22A.

TRR, Xforce, DC sports etc all 2 inch - I am assuming there is something behind that or naturally they would make em bigger

I can sort you out with some kinda deal - free freight or something

[Air2there]

2" or 2 1/4"?

[Ped Rac3r]

Ohhk cool. Are you able to get the DC Sports header for D-series??

[EVLTEK FBI AKL]

yeah I can have it tuesday... Or if you wanna pay online I can have it sent out to straight from the distributor.

[Bananaman]

My Jun headers are 2 1/4"

Would have brought DC headers had these come up sooner for the money.

[Air2there]

Tough decision... :evil:

[Gudgen]

Originally Posted by Air2there

Tough decision... :evil:

do it and get a 150mm cone that flares from 2 to 2.5inches..or even 3"??

[EVLTEK FBI AKL]

yeah those megaphone style things work a treat

Ohhk cool. Are you able to get the DC Sports header for D-series

sorry man - this is all that is available - I have it on good authority that the quality of this pace setter stuff is up there with DC so I don't thin you are missing out.

[EVLTEK FBI AKL]

4-1 Ceramic are sold

[doo0T!doo0T!]

Originally Posted by EVLTEK FBI AKL

sorry man they are 2inch also - I have never seen a set of 2 1/2" H22A.

TRR, Xforce, DC sports etc all 2 inch - I am assuming there is something behind that or naturally they would make em bigger

I can sort you out with some kinda deal - free freight or something

I opened out my old DC sports 4-2-1 H22a headers to a V-band 2.5" collector with a nice smooth flowing transition and the power gains were big. It leaned out the A/F to 12.7 from 11 at WOT as well.
Went from a very sad 112wkw to a respectable 136wkw and it was as if the whole power curve had been lifted up by the same amount.
Mind you the whole exhaust went out to 2.5 at the same time so the gains were not just in the headers.

I dont know why they dont offer a 2.5" option for race.

[EVLTEK FBI AKL]

yeah it is bizzare - every aftermarket h22a header I have seen is 2" - good info for someone interested in getting the most out of their car - DC SPORTS + DootDoot special trick = POWER!

[doo0T!doo0T!]

Originally Posted by EVLTEK FBI AKL

yeah it is bizzare - every aftermarket h22a header I have seen is 2" - good info for someone interested in getting the most out of their car - DC SPORTS + DootDoot special trick = POWER!

ops: Technically a Luke-B16a2 special trick since he did all the hard work ops:

[lazyman]

Is it true that you gain more kw by modding header than cat-back exhaust??

[EVLTEK FBI AKL]

hmm - on the R models, which have larger diameter exhausts that could well be true....

[lazyman]

Does the H22A one just bolt on to my CL1?? Or need mod to fit??

[EVLTEK FBI AKL]

the CL1 has that funky electronic steering box I think and they need to be modded slightly to fit....they obviously bolt onto the head fine at that end and I assume onto the cat ok at the other.

[EVLTEK FBI AKL]

Have just posted some pics of one of the H22A stainless sets - YUM YUM!!!!!

1 stainless and 1 ceramic set left for the H22A.....

[XPLOIT]

Hey Adam, could be keen on some of these for my CL1.

Im after a few other parts too. Ill send you PM

[XSiJames]

hey there what is the pace setter brand like compared to TRR,DC sports, Mugen etc.? I dont think ive heard of them. Is it 2inch collector? This is for the b16a 4-2-1

[EVLTEK FBI AKL]

Am unsure - have not seen them in person.....I belive they are a US made header so would be comparable with DC Sports... the collector is 2inch....

[elijahn]

H22A (will require mods for F20b/CL1)
4-2-1 Stainless - $645

these still for sale??

what exactly needs to be modded to fit onto f20B? I'm keen.