NZHondas.com

Go Back   NZHondas.com > NZH - TardMe > Parts Exchange

Parts Exchange Buy / Sell / Trade: Any and all car parts. No businesses please - If you are a business/garage trader and would like to advertise on NZHondas.com please email advertise@nzhondas.com

 
 
Thread Tools Display Modes
Old 6th September 2007, 12:45 PM   #1 (permalink)
xsiv
Senior Member
6,000rpm (Max Torque)
 
xsiv's Avatar
 
Join Date: Apr 2005
Posts: 2,391
Location: Hamilton
WTD DA6 clips and fitting, plastics

well ive just painted my car and i need to get some little plastics clips and a few other things.

i need
2 back boot plastics that line the back seat and boot,(Quite big)
all the clips that hold the plastics strips on around the windows. (rear window and frount windscreen)
also the plastic strip on the out side of the car on the drivers door, right up the top buy the glass.

also the two plastics that are on the inside of the door, the ones that go behind the door handle.

thanks
__________________
xsiv da6 313kw b16a
xsiv is offline  
Old 6th September 2007, 09:11 PM   #2 (permalink)
Ebola_One
Senior Member
7,000rpm (Peak Power)
 
Ebola_One's Avatar
 
Join Date: Mar 2002
Posts: 3,234
Location: Upper Hutt
Send a message via ICQ to Ebola_One
I have the two big black plastic trim panels that line each side of the car (inside) $20 + shipping & you can have the frigging things.
Live in Wellington, don't know anyone heading north in the near future though.

They're the facelift ones too, so the darker material and much more softer than the 89-91 ones. (that stuff reminds me of grandpa tweed)
__________________
Your: possessive pronoun. You're: contraction of "you are". ur: you are 8 years old. Get off my internet.
14.49 @ 94mph // 46.9s/1:58 @ Taupo // 1:25s @ Manfield
DA's FTW!
Ebola_One is offline  
Old 7th September 2007, 09:30 AM   #3 (permalink)
xsiv
Senior Member
6,000rpm (Max Torque)
 
xsiv's Avatar
 
Join Date: Apr 2005
Posts: 2,391
Location: Hamilton
are they in good condition, if they are ile take em
they are black right, with greay material ?
__________________
xsiv da6 313kw b16a
xsiv is offline  
Old 7th September 2007, 04:21 PM   #4 (permalink)
Ebola_One
Senior Member
7,000rpm (Peak Power)
 
Ebola_One's Avatar
 
Join Date: Mar 2002
Posts: 3,234
Location: Upper Hutt
Send a message via ICQ to Ebola_One
Quote:
Originally Posted by xsiv
are they in good condition, if they are ile take em
Yep, I managed to remove them without destroying any of the clips. You will need to find your own bolts/screws etc as the ones that I'd have pulled out have been put in the breeding ground of screws & bolts
They need a de-dusting too...
Quote:
Originally Posted by xsiv
they are black right, with greay material ?
See for yourself, they're the Facelift trimmed ones, so darker material than the non-facelift DA's running around.


I have cut the little hole slightly to fit a strut brace through, but with the trim panel in place you don't see it.

If you are still keen on them, keep in mind they will be a bitch to ship because they're quite flimsy and rather large.

Oh also, I have pretty much the entire Facelift interior kicking around here, if you want the door trims, carpet, mats, boot linings etc I can supply them. The door skins will have no winder controls (Electric windows). Offer me something and I'll probably take it. seriously. Oh you can't have the dash :p Or the seats they went long ago.
__________________
Your: possessive pronoun. You're: contraction of "you are". ur: you are 8 years old. Get off my internet.
14.49 @ 94mph // 46.9s/1:58 @ Taupo // 1:25s @ Manfield
DA's FTW!
Ebola_One is offline  
Old 7th September 2007, 06:23 PM   #5 (permalink)
Integ-Rida
Senior Member
3,000rpm (Grandma Drag)
 
Integ-Rida's Avatar
 
Join Date: Oct 2006
Posts: 456
Location: Wellington
how much for the floor mats and carpet? torn, shredded, fraying? are the mats and carpet the black material or grey?
__________________
1989 DA6 Xsi (In the Making)
http://profiles.nzhondas.com/profile2010.html
Integ-Rida is offline  
Old 7th September 2007, 07:51 PM   #6 (permalink)
Ebola_One
Senior Member
7,000rpm (Peak Power)
 
Ebola_One's Avatar
 
Join Date: Mar 2002
Posts: 3,234
Location: Upper Hutt
Send a message via ICQ to Ebola_One
Quote:
Originally Posted by Integ-Rida
how much for the floor mats and carpet? torn, shredded, fraying? are the mats and carpet the black material or grey?
PM'd to not hyjack the thread
__________________
Your: possessive pronoun. You're: contraction of "you are". ur: you are 8 years old. Get off my internet.
14.49 @ 94mph // 46.9s/1:58 @ Taupo // 1:25s @ Manfield
DA's FTW!
Ebola_One is offline  
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off
Forum Jump


All times are GMT +12. The time now is 09:40 PM.
 


Design by: vBulletin Skins Zone
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.