Fs: TWM 50m Quads **pics up**

[EVLTEK FBI AKL]

Bought these to experiment on standard motor and they didn't really work so up for sale.

TWM 50mm Quads
Alloy Trumpets
Brand new (bar dyno time) Unifilter socks ($100)
Bosch 250mm injectors - flow test and new O-rings ($70)
Fuel feed hose made to match up with standard fuel filter
Bolt your standard reg on the end with custom adaptor already made up
Brand new stainless allen key bolts for everything ($60 bucks alone)

Have a custom made vacuum tank also made up which runs your brake booster, FPR, etc etc ($125 plus fittings)

Also have wiring loom made up for TPS etc

So they are pretty much ready to go!!!!

I am off to aussie today for the weekend but thought I would post them up now so people can see whats up.

Will get pics sorted when I return.

Offers around the $1800 mark.

[Trivium]

Might want to remove the "didnt really work" bit :wink:

[EVLTEK FBI AKL]

well I was hoping that people would put 2 and 2 together and realise they won't work on standard motors.

PLEASE NOTE: unless you are after bling value only - then some big cams and high compression are needed for these to be of benefit

[timmiblc]

Originally Posted by EVLTEK

well I was hoping that people would put 2 and 2 together and realise they won't work on standard motors.

PLEASE NOTE: unless you are after bling value only - then some big cams and high compression are needed for these to be of benefit

Unless you're me 8) Pm'd

[Genkei]

who said it doesnt make power??

just need the right combo

if anyone buying it ill give them a hand and sort it out

[EVLTEK FBI AKL]

yeah small ones likes your Tim will work but 50mm ones require a bit more work done to see some results.

I will take reasonable offers.

[timmiblc]

Originally Posted by EVLTEK

yeah small ones likes your Tim will work but 50mm ones require a bit more work done to see some results.

I will take reasonable offers.

*click*

Bump!

[americ_ian]

extra $100 to get them to fit k20a was it adam? haha bump it up

seen these in person .... sex in a box!

[EVLTEK FBI AKL]

well actually probably not much more...

These are unniversal style quads that have had a custom flange made up to mate with the head so All you would need is a new flange made up and away you go.

So really you could fit em too just about anything with roughly the same port spacing.

[timmiblc]

You don't need them Ian!

[Gudgen]

lets have a pic then..

[EVLTEK FBI AKL]

up

just come back from aussie - can't find batteries for digi cam!!!
will suss something out asap

[EVLTEK FBI AKL]

pictures as promised.

the AEM reg did not seem to be working when we tried it = pressure was all over the place - haven't not had a look inside it - could be an easy fix and will throw it in, The loom is made up for the TPS sensor - 3 space terminals go on it and then I used some quik crimp male and female ends to connect with factory TPS loom.





This is a custom plenum that you can use to run with the quads and then use a normal intake pipe and ducting etc or good for running turbo. Came with them so may as well go with them.

[Gudgen]

theyre been modified a wee bit. whats up with that?

[EVLTEK FBI AKL]

as said above in one of the posts, they are universal bodies that have been adapted to a custom flange so they bolt up to a B16 head...

I assume that TWM sell them in pairs like this.

had them operating fine on my car so their functionality is fine.

[B16B EG Civic]

I'm happy to give them a good home and show them some loven, but can only pay with stones ......

[EVLTEK FBI AKL]

as long as the stones are clear and sparkly or a goldish colour we have a deal

[EVLTEK FBI AKL]

up

[EVLTEK FBI AKL]

up

[EVLTEK FBI AKL]

up

[B16B EG Civic]

free bump

[EVLTEK FBI AKL]

reasonable offers - can be made to fit anything with new flange

[EVLTEK FBI AKL]

must sell these guys!

[EVLTEK FBI AKL]

up

[EVLTEK FBI AKL]

up