toda quads

DA8vtec · 2nd July 2008, 10:00 PM

just wondering if anyone knows wat computer to run with toda quads.B16a with forged internals kelford cams supertech valves and springs. Just dont know what to use. Also maybe someone could recomend a tuning place in chch

d16a7 · 2nd July 2008, 10:21 PM

link or hondata.. thats all id run.. see nzefi and ask... or go straight to Link themselves.

kelfords quadded EG runs on link.. and that makes some good numbers

Coupe-R · 2nd July 2008, 10:34 PM

I'd try with crome(cheapest option, has ITB support) then hondata or link.

VTAKYO · 3rd July 2008, 10:51 AM

Call Spec and ask what options they reccomend that they can tune. Best tuners in Christchurch IMO. No point going to a EMS that can't be tuned. I don't think anybody in Christchurch can do Hondata or Crome.

Quote:

Spec Performance
417 St Asaph St, Riccarton, Christchurch
(03)-377 7147 or (027)-425 3433

DA8vtec · 3rd July 2008, 02:34 PM

Sweet cheers for the advice he didnt want to spend more money and find out it would be difficult to use

BLAZED_RACER · 3rd July 2008, 02:43 PM

more details and pics of ya setup dude... sounds like a minter.

bmgjet · 3rd July 2008, 02:48 PM

If you have a DA8 like your names sugests then you will have a PR3 obd0 ecu which will work with BRE which supports ITBs and even has a base map for them.

Or you can just use a normal tune if you keep the MAP sensor.

DA8vtec · 3rd July 2008, 08:33 PM

yea its goin in a ef9 civic so dont know wat ecu in that sure someone can tell me will get pics when i got to my cousins as it is his he just a bit slack

trend.whore · 3rd July 2008, 08:41 PM

Wowo you got some genuine Toda quads? Nicee~

b_series_power · 3rd July 2008, 09:11 PM

mean!! pictures pleas

Coupe-R · 4th July 2008, 11:14 AM

Quote:

If you have a DA8 like your names sugests then you will have a PR3 obd0 ecu which will work with BRE which supports ITBs and even has a base map for them.

Or you can just use a normal tune if you keep the MAP sensor.

Yeh seems hes down chch, if no one can chip tune then no point.

You NEED to add ITB support even when using MAP sensor, as there isn't enough pressure, so you need the MAP/TPS cross over as the car is accelerating.

otherwise map alone would be a bitch.
TPS alone would be easier, I'd use both if it was me. MAP/TPS crossover point

DA8vtec · 4th July 2008, 12:38 PM

yea in nelson so chch the closest place thinking of a link would that support all of those?

VTAKYO · 4th July 2008, 01:23 PM

Yep, Link would be good. Or Microtec.

b_series_power · 4th July 2008, 03:43 PM

Quote:

Originally Posted by VTAKYO

Yep, Link would be good. Or Microtec.

it would have to be a new link they have itb support.. but hondata is ideal

SK1TZ- EF · 4th July 2008, 04:20 PM

it wouldnt be far to ship it to Welly either, we have Speedtech...

But they charge like a wounded bull....

DA8vtec · 4th July 2008, 05:19 PM

yea was thinkin speedtech but thought the price would be higher by the time crossed the straight plus dont know my way round which makes it a bit of a mission

bmgjet · 4th July 2008, 05:31 PM

pgmfi recommends crome, It support for ITBs is better then hondata when using the itb plus plug in. but hondata s300 is the easiest to use.

VTAKYO · 5th July 2008, 02:20 AM

Yes a Hondata or Crome would be ideal - but afaik nobody in Christchurch can tune them. Call NZEFi and Spec and ask what they are able to tune Honda specific wise, with ITB support.

SK1TZ- EF · 5th July 2008, 08:14 AM

I can organise freight etc and know my way around...

just a thought, good luck, I got a DA6 Y1 setup in my EF9

sam

DA8vtec · 5th July 2008, 05:20 PM

sweet will keep that in mind ill give these chch people a ring first see wat the know.Have to wait for the funds a little while yet

SK1TZ- EF · 6th July 2008, 09:44 AM

LOL, I hear that, hahahah

Gudgen · 6th July 2008, 11:57 AM

the only way you can use hondata is to convert your ecu system to obd1. which involves an obd1 ecu, conversion harness, obd1 distributor, 4-wire oxygen sensor(optional). thats only if your ecu is obd0. this would probably affect your choice as it may tip the cost above a link g3.

DA8vtec · 6th July 2008, 04:52 PM

Yea that was wat i thought because ive read on hear that the ecus are different. Didnt know thought they were the same but oh well

Coupe-R · 7th July 2008, 02:03 PM

Yeh going OBD1 would be a hell of alot easier, and if you are going with a link plug in I believe they are ONLY OBD1/2 not OBD0.
(as far as I know anyways)

All you need for crome is an ECU (you will find one for under $100)
and dizzy ($120-$180)

thats it, don't run 02 just tune it well.

Depending on what injectors you run you may need to keep the OBD0 resistor box in the car or remove it.

DA8vtec · 7th July 2008, 02:26 PM

yea not sure wat injectors they are came with the quads. do toda bring them out with injectors?

2nd July 2008, 10:00 PM	#1 (permalink)
DA8vtec Member 700rpm (Idle) Join Date: Jun 2008 Posts: 41 Location: Nelson	toda quads just wondering if anyone knows wat computer to run with toda quads.B16a with forged internals kelford cams supertech valves and springs. Just dont know what to use. Also maybe someone could recomend a tuning place in chch Last edited by DA8vtec; 2nd July 2008 at 10:14 PM. Reason: cant spel :<

2nd July 2008, 10:21 PM	#2 (permalink)
d16a7 Senior Member 7,000rpm (Peak Power) Join Date: Dec 2006 Posts: 3,640 Location: Auckland	Re: toda quads link or hondata.. thats all id run.. see nzefi and ask... or go straight to Link themselves. kelfords quadded EG runs on link.. and that makes some good numbers __________________ PROJECT EJ - D Ninja

2nd July 2008, 10:34 PM	#3 (permalink)
Coupe-R Senior Member 9,000rpm (S2000 Redline!) Join Date: Apr 2002 Posts: 6,965 Location: Tauranga	Re: toda quads I'd try with crome(cheapest option, has ITB support) then hondata or link.

3rd July 2008, 02:34 PM	#5 (permalink)
DA8vtec Member 700rpm (Idle) Join Date: Jun 2008 Posts: 41 Location: Nelson	Re: toda quads Sweet cheers for the advice he didnt want to spend more money and find out it would be difficult to use Last edited by DA8vtec; 4th July 2008 at 12:39 PM. Reason: :;

3rd July 2008, 02:43 PM	#6 (permalink)
BLAZED_RACER Team NZH: Mod 11,000rpm (Spoon B16B!!) Join Date: Jan 2002 Posts: 9,768 Location: Tokoroa	Re: toda quads more details and pics of ya setup dude... sounds like a minter.

3rd July 2008, 02:48 PM	#7 (permalink)
bmgjet Senior Member 6,000rpm (Max Torque) Join Date: Jul 2007 Posts: 2,148 Location: New Plymouth	Re: toda quads If you have a DA8 like your names sugests then you will have a PR3 obd0 ecu which will work with BRE which supports ITBs and even has a base map for them. Or you can just use a normal tune if you keep the MAP sensor.

3rd July 2008, 08:33 PM	#8 (permalink)
DA8vtec Member 700rpm (Idle) Join Date: Jun 2008 Posts: 41 Location: Nelson	Re: toda quads yea its goin in a ef9 civic so dont know wat ecu in that sure someone can tell me will get pics when i got to my cousins as it is his he just a bit slack

3rd July 2008, 08:41 PM	#9 (permalink)
trend.whore Senior Member 11,000rpm (Spoon B16B!!) Join Date: Oct 2003 Posts: 9,876 Location: North Shore City	Re: toda quads Wowo you got some genuine Toda quads? Nicee~ __________________ GFB PARTS NOW AVAILABLE HERE! Moonlight Racing / A'PEXi, HKS, Greddy, Cusco and many more!

3rd July 2008, 09:11 PM	#10 (permalink)
b_series_power Senior Member 7,000rpm (Peak Power) Join Date: Dec 2006 Posts: 2,614 Location: Hamilton	Re: toda quads mean!! pictures pleas __________________ jdmstu, EVLVTC build, bebo add me 0273180541

4th July 2008, 12:38 PM	#12 (permalink)
DA8vtec Member 700rpm (Idle) Join Date: Jun 2008 Posts: 41 Location: Nelson	Re: toda quads yea in nelson so chch the closest place thinking of a link would that support all of those?

4th July 2008, 01:23 PM	#13 (permalink)
VTAKYO Team NZH: Retired 11,000rpm (Spoon B16B!!) Join Date: Jul 2004 Posts: 9,565 Location: Christchurch	Re: toda quads Yep, Link would be good. Or Microtec. __________________ ¤ Smashing Magazine ¤ Pokerstars ¤ ¤ So 2.0 Fresh Even My Sandwiches Have Rounded Corners and Drop Shadows ¤

4th July 2008, 04:20 PM	#15 (permalink)
SK1TZ- EF Senior Member 7,000rpm (Peak Power) Join Date: Aug 2006 Posts: 3,568 Location: Upper Hutt	Re: toda quads it wouldnt be far to ship it to Welly either, we have Speedtech... But they charge like a wounded bull.... __________________ NEW JOB!--> www.blackwoodspaykels.co.nz Big thanks to all who have helped with muscle and info, you all know who ya are! WSC f0 LyF

4th July 2008, 05:19 PM	#16 (permalink)
DA8vtec Member 700rpm (Idle) Join Date: Jun 2008 Posts: 41 Location: Nelson	Re: toda quads yea was thinkin speedtech but thought the price would be higher by the time crossed the straight plus dont know my way round which makes it a bit of a mission

4th July 2008, 05:31 PM	#17 (permalink)
bmgjet Senior Member 6,000rpm (Max Torque) Join Date: Jul 2007 Posts: 2,148 Location: New Plymouth	Re: toda quads pgmfi recommends crome, It support for ITBs is better then hondata when using the itb plus plug in. but hondata s300 is the easiest to use.

5th July 2008, 02:20 AM	#18 (permalink)
VTAKYO Team NZH: Retired 11,000rpm (Spoon B16B!!) Join Date: Jul 2004 Posts: 9,565 Location: Christchurch	Re: toda quads Yes a Hondata or Crome would be ideal - but afaik nobody in Christchurch can tune them. Call NZEFi and Spec and ask what they are able to tune Honda specific wise, with ITB support. __________________ ¤ Smashing Magazine ¤ Pokerstars ¤ ¤ So 2.0 Fresh Even My Sandwiches Have Rounded Corners and Drop Shadows ¤

5th July 2008, 08:14 AM	#19 (permalink)
SK1TZ- EF Senior Member 7,000rpm (Peak Power) Join Date: Aug 2006 Posts: 3,568 Location: Upper Hutt	Re: toda quads I can organise freight etc and know my way around... just a thought, good luck, I got a DA6 Y1 setup in my EF9 sam __________________ NEW JOB!--> www.blackwoodspaykels.co.nz Big thanks to all who have helped with muscle and info, you all know who ya are! WSC f0 LyF

5th July 2008, 05:20 PM	#20 (permalink)
DA8vtec Member 700rpm (Idle) Join Date: Jun 2008 Posts: 41 Location: Nelson	Re: toda quads sweet will keep that in mind ill give these chch people a ring first see wat the know.Have to wait for the funds a little while yet __________________ go vtec!!!

6th July 2008, 09:44 AM	#21 (permalink)
SK1TZ- EF Senior Member 7,000rpm (Peak Power) Join Date: Aug 2006 Posts: 3,568 Location: Upper Hutt	Re: toda quads LOL, I hear that, hahahah __________________ NEW JOB!--> www.blackwoodspaykels.co.nz Big thanks to all who have helped with muscle and info, you all know who ya are! WSC f0 LyF

6th July 2008, 11:57 AM	#22 (permalink)
Gudgen Senior Member 6,000rpm (Max Torque) Join Date: Jul 2002 Posts: 2,465 Location: Dunedin	Re: toda quads the only way you can use hondata is to convert your ecu system to obd1. which involves an obd1 ecu, conversion harness, obd1 distributor, 4-wire oxygen sensor(optional). thats only if your ecu is obd0. this would probably affect your choice as it may tip the cost above a link g3. __________________ B16A EF9 250BHP *\| "Owning an EF9 since ages ago!"*

6th July 2008, 04:52 PM	#23 (permalink)
DA8vtec Member 700rpm (Idle) Join Date: Jun 2008 Posts: 41 Location: Nelson	Re: toda quads Yea that was wat i thought because ive read on hear that the ecus are different. Didnt know thought they were the same but oh well __________________ go vtec!!!

7th July 2008, 02:03 PM	#24 (permalink)
Coupe-R Senior Member 9,000rpm (S2000 Redline!) Join Date: Apr 2002 Posts: 6,965 Location: Tauranga	Re: toda quads Yeh going OBD1 would be a hell of alot easier, and if you are going with a link plug in I believe they are ONLY OBD1/2 not OBD0. (as far as I know anyways) All you need for crome is an ECU (you will find one for under $100) and dizzy ($120-$180) thats it, don't run 02 just tune it well. Depending on what injectors you run you may need to keep the OBD0 resistor box in the car or remove it.

7th July 2008, 02:26 PM	#25 (permalink)
DA8vtec Member 700rpm (Idle) Join Date: Jun 2008 Posts: 41 Location: Nelson	Re: toda quads yea not sure wat injectors they are came with the quads. do toda bring them out with injectors? __________________ go vtec!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Quads?	Bigelboe	Forced Induction	25	22nd November 2007 07:41 AM
F.S. TWM 52mm Quads - Sold	toy	Parts Exchange	49	22nd September 2007 11:59 AM
Fs: TWM 50m Quads pics up	EVLTEK FBI AKL	Parts Exchange	24	21st August 2007 07:53 AM
MAKE YOUR OWN QUADS.	Deanis	NA Tuning	37	5th March 2007 08:15 AM
see why I love my toda c's - toda c's vs skunk2 pro1	BigAl	NA Tuning	2	14th May 2006 08:29 PM