Identify these headers... please?

[Snoozin]

As per the title. 4-2-1 2pc headers, JASMA tagged, carry the number 97E011 B18C





Were on my car since I purchased it...

Cheers!

[M3_Power]

That's a 1st generation M&M Honda 4-2-1 two piece header or possibly an Apexi one ... they look very similar.

[blizard]

Look like a Fujitsubo header, actually, different - this picture is apparently a Fujitsubo header and the 4-2 piece is different:


Quick look for Mac's 2 piece J's headers on trademe and they look similar
http://www.trademe.co.nz/Trade-Me-Mo...-150780702.htm

Think I remember reading something about looking up the Jasma tag to get info on it?

[M3_Power]

the head flange doesn't look FGK ... FGK also have a tag on all their products.

[blizard]

Yep, they looked similar to some I'd seen recently in the flesh but I found that pic which is different.
I hadn't heard of M&M but the two piece ones do look like Snoozin's header, from here http://www.neweraparts.com/Default.a...&ProductID=761

also looks like J's 2 piece, and the M&M 1 piece looks like J's 1 piece and also TRR...

[VTAKYO]

Does the head flange have any engravings on it? Take a look around.

[Matty]

Googling the code turned up this H-T thread:

http://www.honda-tech.com/zerothread?id=1403896

Not much but an2ny888 may know something about them.

[tianporn]

Looks similar to my old header thats on Fabolous car...

It is FGK aka Fujitsubo.

[Snoozin]

Hrmm cheers... mystery headers!

The primaries look a lot longer than some of the ones suggested though... hmm.

[M3_Power]

Check out the picture of the header for M&M Honda in Hyper Rev (second one for the integras) it has a photo of the exact header in it - similar long primaries and flat flange and same type of collector flange and head flange.

My bet's on that it's a M&M Honda one.

I've yet to see a FGK without the FGK plaque welded somewhere on the header. Nor do FGKs have triangular flanges for the head ... Neither do J's Racings ...

[Snoozin]

Doh! Never occured to me to check out my Hyper Rev's.

Will do...

[tysonzane]

I've heard of a few Americans having luck email Jasma directly for some answers. I guess you have to be pretty keen but it is interesting on the whole

info@jasma.org

8)

[tysonzane]

Found this too, not sure if it gets us anywhere though:

JASMA certified products mufflers and exhaust manifold, but I want to buy, tell me where you come from?

協会加盟企業の製造するJASMA認定品については、協会で管理番号を付けてデーターベース化 しています。 JASMA Association member companies manufacture products certified for the association to manage the number of the database. 現在ユーザー様向けのサービスを実施しております。 Current users of services for the implementation. 愛車の車両型式とエンジン形式を事前に調べお電話を下されば、情報を提供いたします。 Type of vehicle and engine type beloved vehicle to pre-check your phone下され, to provide information. 電話番号は042-700-2112です。 Telephone number is 042-700-2112. またインターネットメールにてのお問い合わせもお受けいたします。 The Internet and e-mail inquiries we received.
ただし、SR・RO製品については、各製造メーカーにお問い合わせください。 However, SR RO product information, please contact your each manufacturer. なお、JASMA登録番号からの検索はただいま実施しておりません。 In addition, JASMA registration number from the implementation of the search is on.

[DC2-R]

What did you use to clean them? Came up mint

[r3zin]

Looks like autosol + hours of buffing?

[mr_tec]

ones i used to have had the stamp around the other way

What did you use to clean them? Came up mint

x2

[chromies ea]

Hey, ive also got the same headers on my itr!!

They're unbranded, just the jasma plate in the same place. Came on the car from japan with the mugen exhaust.. and ive always wanted to know what brand theyre

btw, what is honda b&b? just like genuine honda performance parts? ops:

[Snoozin]

Originally Posted by DC2-R

What did you use to clean them? Came up mint

Degrease, wash with hot water, 600 grit W&D, 800 grit W&D, 1000 grit W&D, wash again with hot water, then Autosol and heaps of buffing to finish. About 6 hours solid work in total. Painted the bottom section with high temp paint after scuffing it back with 240 grit and smoothing with some 400, since all it does is get plastic bags stuck to it anyway

May be selling them shortly however, around the $200 mark sound fair?

[GDB]

Originally Posted by chromies ea

Hey, ive also got the same headers on my itr!!

They're unbranded, just the jasma plate in the same place. Came on the car from japan with the mugen exhaust.. and ive always wanted to know what brand theyre

btw, what is honda b&b? just like genuine honda performance parts? ops:

mine has the same too but has b16a on the stamp and standard type r 2-1 and have been told mine could be spoon

[Snoozin]

Had a good scan through my Hyper Rev's and they look closest to the 2pc Spoon ones, orientation of the JASMA tag matches up and all :? No other markings though which confuses me.

[vincikwan]

Looks spoon to be bro. I will be getting mine soon....its on the way!

[chromies ea]

Originally Posted by Snoozin

Had a good scan through my Hyper Rev's and they look closest to the 2pc Spoon ones, orientation of the JASMA tag matches up and all :? No other markings though which confuses me.

that wouldnt suprise me if they were, mid rang is real torquey and top end pulls hard.. but they arent branded so i cant officially get the jdm spoon browny points haha

[Nick.B]

you still sell,n these i mite be keen have you got a contact number?