DOHC ZC sump

[SiLent]

ok, my car is approaching that time where its gonna need another service . now, to cut a long story short, i need to fit a new sump when i change the oil. my question is, are there any other sumps from other honda motors out there that will bolt straight to my engine? (dohc zc)

[Horny_Devil]

nope

even the D series ones dont all bolt up to one another, best bet is to just try and find another ZC one

[doo0T!doo0T!]

And if you do manage to find one that fits, make sure you use the dipstick that went with the sump you are using.
I have four ZC's on the floor at home and there are three different length dipsticks between them.
If you mismatch them you could over or underfill your engine with oil (thats if you use the dipstick as an indicator)

[SiLent]

surely you cant be using all four, thats just greedy

[doo0T!doo0T!]

Originally Posted by SiLent

surely you cant be using all four, thats just greedy

The only one i have which is off an engine and not full of old oil has no dipstick with it. You're welcome to it but I cant gaurantee it'll be the same as yours. (it's actually my 5th one )

[SiLent]

hmmm ok thanks dude! i will have a look at mine over the weekend then

[enigami]

Originally Posted by doo0T!doo0T!

And if you do manage to find one that fits, make sure you use the dipstick that went with the sump you are using.
I have four ZC's on the floor at home and there are three different length dipsticks between them.
If you mismatch them you could over or underfill your engine with oil (thats if you use the dipstick as an indicator)

Hey, does the dipstick length differ between gen2 / gen3 zc engines or different hm5 hm2 hm8 etc zc's I was curious as i swapped out my hm8 zc to hm2 and used an hm5 caast zc dipstick

Haha I hope this makes sense, thanks for your help