My project EG. Few new bits

Green Machine · 21st April 2007, 04:12 PM

Just got myself a nice tidy eg to turn into a car that I can have some fun on the track and strip with and hopefully get some respectable times etc. Since no one wanted to buy my old dc2 I am going to be taking the b18c-R engine and box out of that as well as afew other parts like the 4>1 headers and short shifting kit etc, seats, and put them into the civic. Aiming for around a 13.8 on the 1/4 mile and not sure about the track.

So the car, Its a tidy NZDM 1992 eg5? that I got off a 78 year old lady, has only done 114,000kms and has been garaged for last 10 years. No dents and just the odd shopping trolley mark. Took me awhile to find a car that had everything I wanted but this one covers it. I has some very nice lack of features and im sure this would be an n1 civic if the eg had that version

Heres some pictures of it. And the goodies I have purchased so far.

No ABS and no air con standard. 1600cc D16a.

220 kmph speedo!!

No drivers airbag or cup holders

My new goodies, exedy 3 puk race clutch & carbon fibre whale's penis intake!

So what do you think of my new car?

fricks · 21st April 2007, 04:15 PM

Whats happening with the dc2 after the engine comes out?

SK1TZ- EF · 21st April 2007, 04:24 PM

welcome to the engine swap club.......just make sure it goes eventually

sam

Logger · 21st April 2007, 04:29 PM

It's nice!!

AzN_K · 21st April 2007, 04:33 PM

Dam thats real tidy! Best of luck with the project

Dionysus · 21st April 2007, 04:34 PM

Wish my body looked like that!

Green Machine · 21st April 2007, 07:23 PM

Cheers for the coments guys, hope to get abit of work done on it tommorow. still waiting for cam gears to arrive from buddy club.
the body looks alot nicer than in the pics. I think there is only small tiny supermarket dents in it. the dc2 chassis will be sold with the d16a in it.

berman · 22nd April 2007, 11:58 AM

Nice buy! Swap everything over, wheels, suspension etc unless you got some new stuff on the way

Then get Jamie pissed the night before, (well, he doesn't exactly need provoking), go to drags and wipe that smile off his face

Haha His and Hers, I nominate Danni nicks bits off yours

Goodluck with the build :wink:

Logger · 22nd April 2007, 12:05 PM

Shit this thing is going to be such a sleeper! Looks like you've got everything well planned out.

manked · 22nd April 2007, 12:10 PM

wow thats tidy! good work

hope this is a build thread

nva2nd · 22nd April 2007, 02:51 PM

Forum Name needs to be changed :wink:

Looking good Haden, best luck with the build.

Green Machine · 22nd April 2007, 03:20 PM

Quote:

Originally Posted by manked

wow thats tidy! good work

hope this is a build thread

Course there is going to be some building here. Just dont know how fast it will progress. Just waiting for the parents to move out this week so that I have the 2 car garage to myself to start wripping out the motors and swapping them over.

Also forgot to mention I have d2s adjustable suspension and a mugen replica front lip for it.

Haden.

typalo · 22nd April 2007, 06:03 PM

damn b18cr eg5 is baller status. glad to see u decided to go the b series way instead of the durty H series. good luck with the build.

Bl4ckt0p · 22nd April 2007, 10:57 PM

good to see you did get it! Good luck with the build bro keep us updated!

Green Machine · 23rd April 2007, 04:55 PM

Well put lip on the car today after painting it last week and started to get the paint off the old dc2 rims. Decided id try paint stripper... big mistake as its hard to get in all the angles etc. Going to just sand the rest of the paint off as strippers made one hell of a mess and just going to lightly sand and paint the other rims. Going to paint them gloss black. Cant be bothered going with powder coating them as I dont know how long ill have these rims for and paint lasts long enough anyway.

Also my new steering wheel arrived today. Integra 96 type R wheel ftw

grandell · 23rd April 2007, 05:07 PM

Haha Danni's penis is bigger than yours :wink:

Looking good though! Will be a mean little beast once its all done. Gimme a yell if you ever need a hand workin on it

Dionysus · 23rd April 2007, 07:21 PM

I must admit the type r wheel i stuck in mine feels a lot better than boat tiller that came on it!

toda · 23rd April 2007, 07:39 PM

lookin good!! keep em coming@@@@

[QUIKdc2] · 25th April 2007, 11:46 AM

How did I only just see this thread!!! If you need any help bro just gimme a text seeing as my build isn't going so fast I'm getting bored, finally I have some competition

Quote:

Originally Posted by berman

Then get Jamie pissed the night before, (well, he doesn't exactly need provoking), go to drags and wipe that smile off his face

Hahaha done that... still beat him

first drags i ever did I was hammered the night before, something tells me Im not gonna be so lucky anymore.....

Soichiro · 25th April 2007, 12:22 PM

Quote:

Originally Posted by Green Machine

Also my new steering wheel arrived today. Integra 96 type R wheel ftw

Quote:

Originally Posted by Dionysus

I must admit the type r wheel i stuck in mine feels a lot better than boat tiller that came on it!

Best road wheel ever, completely changed the feel of my EF.

Mint car.

beowolf455 · 27th April 2007, 05:32 PM

I got one in my crx too, way beta than the stock wagon wheel lol

Ped Rac3r · 27th April 2007, 06:13 PM

I might be keen to buy the D16A if you dont put it in your Teg...

Green Machine · 29th April 2007, 01:45 PM

Quote:

Originally Posted by Ped Rac3r

I might be keen to buy the D16A if you dont put it in your Teg...

Nah will be putting the d16a into the teg so that it sells. No work done yet as have been busy helping olds move and raced in the tauranga rally yesterday as co driver in my fathers rx7. Managed a 3rd in our class and 41 out of 61 people and was first rally so not so bad.
Will be taking engine out of teg next weekend so will get some pics etc.

badcf4 · 29th April 2007, 01:56 PM

shit I only just found this too!!! Nice score...loving manual windows bro :thumbsup: should be an evil little weapon once all going......

how much for the leftover tegz with only half an engine in it ??

[QUIKdc2] · 29th April 2007, 06:03 PM

Quote:

Originally Posted by Green Machine

Quote:

Originally Posted by Ped Rac3r

I might be keen to buy the D16A if you dont put it in your Teg...

Will be taking engine out of teg next weekend so will get some pics etc.

Haha might give you hand if im free and have my car going again.

21st April 2007, 04:12 PM	#1 (permalink)
Green Machine Senior Member 6,000rpm (Max Torque) Join Date: Dec 2005 Posts: 1,823 Location: Te Puke	My project EG. Few new bits Just got myself a nice tidy eg to turn into a car that I can have some fun on the track and strip with and hopefully get some respectable times etc. Since no one wanted to buy my old dc2 I am going to be taking the b18c-R engine and box out of that as well as afew other parts like the 4>1 headers and short shifting kit etc, seats, and put them into the civic. Aiming for around a 13.8 on the 1/4 mile and not sure about the track. So the car, Its a tidy NZDM 1992 eg5? that I got off a 78 year old lady, has only done 114,000kms and has been garaged for last 10 years. No dents and just the odd shopping trolley mark. Took me awhile to find a car that had everything I wanted but this one covers it. I has some very nice lack of features and im sure this would be an n1 civic if the eg had that version Heres some pictures of it. And the goodies I have purchased so far. No ABS and no air con standard. 1600cc D16a. 220 kmph speedo!! No drivers airbag or cup holders My new goodies, exedy 3 puk race clutch & carbon fibre whale's penis intake! So what do you think of my new car? __________________ b18cR nzdm eg.. 143kws..not enough... Last edited by Green Machine; 18th May 2008 at 08:45 PM.

21st April 2007, 04:24 PM	#3 (permalink)
SK1TZ- EF Senior Member 7,000rpm (Peak Power) Join Date: Aug 2006 Posts: 3,517 Location: Upper Hutt	welcome to the engine swap club.......just make sure it goes eventually sam __________________ "Family Guy had better not show the Prophet Mohammed tonight....I'm Serious, c'mon, its not even that funny"

21st April 2007, 04:29 PM	#4 (permalink)
Logger Senior Member 8,000rpm (B Series Redline!) Join Date: May 2004 Posts: 5,341 Location: Christchurch	It's nice!! __________________ Fortyone Automotive J's Racing Work Wheels Xtrucking.com

21st April 2007, 04:34 PM	#6 (permalink)
Dionysus Senior Member 5,000rpm (VTEC Power!) Join Date: May 2006 Posts: 949 Location: North Shore City	Wish my body looked like that! __________________ Can't buy what I want cos it's free

21st April 2007, 07:23 PM	#7 (permalink)
Green Machine Senior Member 6,000rpm (Max Torque) Join Date: Dec 2005 Posts: 1,823 Location: Te Puke	Cheers for the coments guys, hope to get abit of work done on it tommorow. still waiting for cam gears to arrive from buddy club. the body looks alot nicer than in the pics. I think there is only small tiny supermarket dents in it. the dc2 chassis will be sold with the d16a in it. __________________ b18cR nzdm eg.. 143kws..not enough...

21st April 2007, 04:15 PM	#2 (permalink)
fricks Senior Member 4,000rpm (Taxi Drag) Join Date: Sep 2005 Posts: 523 Location: Tauranga	Whats happening with the dc2 after the engine comes out?

21st April 2007, 04:33 PM	#5 (permalink)
AzN_K Senior Member 4,000rpm (Taxi Drag) Join Date: Jul 2004 Posts: 813 Location: Gisborne	Dam thats real tidy! Best of luck with the project

22nd April 2007, 11:58 AM	#8 (permalink)
berman Team NZH: Mod 8,000rpm (B Series Redline!) Join Date: Jun 2003 Posts: 4,532 Location: Tauranga	Nice buy! Swap everything over, wheels, suspension etc unless you got some new stuff on the way Then get Jamie pissed the night before, (well, he doesn't exactly need provoking), go to drags and wipe that smile off his face Haha His and Hers, I nominate Danni nicks bits off yours Goodluck with the build :wink: __________________ www.speedfactor.co.nz www.slipstreamperformance.co.nz *144fwkW of grocery getting m4dn3ss*

22nd April 2007, 12:05 PM	#9 (permalink)
Logger Senior Member 8,000rpm (B Series Redline!) Join Date: May 2004 Posts: 5,341 Location: Christchurch	Shit this thing is going to be such a sleeper! Looks like you've got everything well planned out. __________________ Fortyone Automotive J's Racing Work Wheels Xtrucking.com

22nd April 2007, 12:10 PM	#10 (permalink)
manked Senior Member 4,000rpm (Taxi Drag) Join Date: Oct 2005 Posts: 528 Location: Wellington	wow thats tidy! good work hope this is a build thread __________________ Only three things interest me in life, cars, women and drainpipes.

22nd April 2007, 02:51 PM	#11 (permalink)
nva2nd Senior Member 7,000rpm (Peak Power) Join Date: Dec 2005 Posts: 3,257 Location: Hamilton	Forum Name needs to be changed :wink: Looking good Haden, best luck with the build. __________________ h2b poWa Kane - Touge Army Lightning Motorsport \|

22nd April 2007, 06:03 PM	#13 (permalink)
typalo Senior Member 3,000rpm (Grandma Drag) Join Date: Jul 2006 Posts: 224 Location: Albert Town	damn b18cr eg5 is baller status. glad to see u decided to go the b series way instead of the durty H series. good luck with the build.

22nd April 2007, 10:57 PM	#14 (permalink)
Bl4ckt0p Senior Member 6,000rpm (Max Torque) Join Date: Feb 2004 Posts: 1,597 Location: Palmerston North	good to see you did get it! Good luck with the build bro keep us updated!

23rd April 2007, 04:55 PM	#15 (permalink)
Green Machine Senior Member 6,000rpm (Max Torque) Join Date: Dec 2005 Posts: 1,823 Location: Te Puke	Well put lip on the car today after painting it last week and started to get the paint off the old dc2 rims. Decided id try paint stripper... big mistake as its hard to get in all the angles etc. Going to just sand the rest of the paint off as strippers made one hell of a mess and just going to lightly sand and paint the other rims. Going to paint them gloss black. Cant be bothered going with powder coating them as I dont know how long ill have these rims for and paint lasts long enough anyway. Also my new steering wheel arrived today. Integra 96 type R wheel ftw __________________ b18cR nzdm eg.. 143kws..not enough...

23rd April 2007, 05:07 PM	#16 (permalink)
grandell Senior Member 5,000rpm (VTEC Power!) Join Date: Aug 2005 Posts: 1,244 Location: Wellington	Haha Danni's penis is bigger than yours :wink: Looking good though! Will be a mean little beast once its all done. Gimme a yell if you ever need a hand workin on it

23rd April 2007, 07:21 PM	#17 (permalink)
Dionysus Senior Member 5,000rpm (VTEC Power!) Join Date: May 2006 Posts: 949 Location: North Shore City	I must admit the type r wheel i stuck in mine feels a lot better than boat tiller that came on it! __________________ Can't buy what I want cos it's free

23rd April 2007, 07:39 PM	#18 (permalink)
toda Senior Member 5,000rpm (VTEC Power!) Join Date: Jun 2002 Posts: 990 Location: Auckland	lookin good!! keep em coming@@@@

27th April 2007, 05:32 PM	#21 (permalink)
beowolf455 Senior Member 4,000rpm (Taxi Drag) Join Date: Aug 2003 Posts: 624 Location: Palmerston North	I got one in my crx too, way beta than the stock wagon wheel lol __________________ EF7 B16 Track car EH1 ZC Streetcar

27th April 2007, 06:13 PM	#22 (permalink)
Ped Rac3r Senior Member 3,000rpm (Grandma Drag) Join Date: Mar 2007 Posts: 359 Location: Auckland	I might be keen to buy the D16A if you dont put it in your Teg...

29th April 2007, 01:56 PM	#24 (permalink)
badcf4 Senior Member 11,000rpm (Spoon B16B!!) Join Date: Apr 2006 Posts: 8,452 Location: Auckland	shit I only just found this too!!! Nice score...loving manual windows bro :thumbsup: should be an evil little weapon once all going...... how much for the leftover tegz with only half an engine in it ?? __________________ yoyo, check my profile and dont forget to get some GAS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ITR/DC2 Interior bits UPDATED with MORE bits	civicsir+	Parts Exchange	4	31st October 2007 08:48 PM