EK9 sway bar to EG?

hare · 19th June 2008, 06:42 PM

is it alright to fit on a EG6???

sugarfree · 11th July 2008, 11:55 PM

i've heard that ek's are too short for eg's....

sugarfree · 20th July 2008, 11:05 PM

Quote:

Originally Posted by sugarfree

i've heard that ek's are too short for eg's....

hang on, i correct my statement.

i might be wrong..... i was thinking of subframe tie bar.

however, i suspect the mounting points are different between eg vs ek due to shorter distance between the LCA's bolting points at the chassis on the ek's.

correct me if im wrong....

Coupe-R · 25th July 2008, 02:08 PM

I know it uses MUCH different endlink setup, no idea if you can use the bar on a EG6?

19th June 2008, 06:42 PM	#1 (permalink)
hare Senior Member 7,000rpm (Peak Power) Join Date: Feb 2003 Posts: 3,291 Location: North Shore City	EK9 sway bar to EG? is it alright to fit on a EG6??? __________________ looking for parts? check: www.speedfactory.co.nz http://profiles.nzhondas.com/profile.php?id=1603

11th July 2008, 11:55 PM	#2 (permalink)
sugarfree Senior Member 6,000rpm (Max Torque) Join Date: Sep 2003 Posts: 1,581 Location: Auckland	Re: EK9 sway bar to EG? i've heard that ek's are too short for eg's.... __________________ Red EG6

25th July 2008, 02:08 PM	#4 (permalink)
Coupe-R Senior Member 9,000rpm (S2000 Redline!) Join Date: Apr 2002 Posts: 6,234 Location: Tauranga	Re: EK9 sway bar to EG? I know it uses MUCH different endlink setup, no idea if you can use the bar on a EG6?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: EK9 Sway Bar	4VTECN	Suspension/Handling	5	27th June 2008 10:03 PM
EK4 sway bar HELP	hybrid_H	Handling	20	19th June 2008 09:25 AM
ITR sway bar on a EG	Rallyhonda	Tech Help	23	25th February 2008 10:44 PM
sway bars	ryan540	Handling	5	6th July 2007 01:24 PM
F/S Itr rear sway bar	DSCRET	Parts Exchange	3	8th September 2006 07:53 PM