DOBI Super Lows

Danielle · 9th July 2007, 09:47 AM

Hi guys and girls,

Just purchased some DOBI Super Lows for my car and I hear that they are pretty damn low... now I am wondering what I have got myself into!

Do you think ya'll could post up some pictures of cars with the superlows fitted so I can get some idea.

Thanks!!

[QUIKdc2] · 9th July 2007, 10:02 AM

That's awesome!!!!

Just sack it

Nicolla · 9th July 2007, 10:04 AM

Just avoid speed bumps around bayfair and don't drive down the strand in town

two places my car will never go :s

[QUIKdc2] · 9th July 2007, 10:09 AM

I just scrape, whatever's scraping will wear out, and eventually it'll stop.

DrRubber · 9th July 2007, 10:24 AM

It wont be that low.........still drivable as........

and as mentioned if anything is scraping on the ground it will wear off soon enough

FIT THEM...then pics :wink: [/b]

Danielle · 9th July 2007, 11:38 AM

Have been told it will drop about 45mm so wont even tuck the tires as far as I can see...
Avoiding bayfair and the strand is no problem, I'm not much for cruising... Now all I have to do is avoid the neverending potholes we have springing up around here lately!!

Cheers all!

SK1TZ- EF · 9th July 2007, 12:32 PM

45mm is bugger all, you will be wanting it to drop more..

I just put some 35mm TEINs in my EF and I hardly notice the drop, still get 2 fingers under the rears...although I do have to allow for Sagg

Good luck

sam

Danielle · 9th July 2007, 12:44 PM

Hmmm.
You have got me thinking now...
Will see what the outcome is once their in and we shall have a group vote!

[QUIKdc2] · 9th July 2007, 12:57 PM

Mine didnt sag, they rose!!! 8O

Horny_Devil · 10th July 2007, 06:29 AM

thats mine with 45mm springs in it, (i think they are cobra springs) not to bad really

VTEC22 · 10th July 2007, 02:03 PM

Your worried about springs being to low???

Weaksauce

d0cilecd6 · 18th July 2007, 09:12 PM

Heres mine with Dobi Superlows in it, was too high for my liking. Adjustables all the way

DVSCVC · 19th July 2007, 08:44 PM

Here's my EF with Dobi Superlows in it..

Green Machine · 20th July 2007, 06:59 AM

heres a pic of Danielles civic with the super lows in it. They dropped abit more after a day driving. Low in back but high in front. A b18c will fix that with a bit of extra weight

SQUERT · 21st July 2007, 04:00 PM

mmm not too bad, you'll get used to them and want to go lower though I guarentee it

SK1TZ- EF · 22nd July 2007, 11:18 AM

all this talk...

i got my 35/40mm TEINs in while I did my swap....

It was a Go-Kart prior, so I am damn keen to drive it to see how much better it is

ops: Probably more so than the extreeeme Vtak qualitie my car will now offer.

*sniff*

ahh well, best start saving to drop it in to mates work for diagnosis
:wink:
sam

VTAKYO · 22nd July 2007, 11:53 AM

Quote:

Originally Posted by VTEC22

Your worried about springs being to low???

Weaksauce

MS JDM · 22nd July 2007, 03:13 PM

Low schmo, thats nothing!!! If its not scraping then it's not low enough!

VTAKYO · 22nd July 2007, 03:15 PM

Quote:

Originally Posted by SO FLY

Low schmo, thats nothing!!! If its not scraping then it's not low enough!

Werd Lind :thumbsup: I remember sparks out the back of your Rafaga, haha

9th July 2007, 09:47 AM	#1 (permalink)
Danielle Senior Member 5,000rpm (VTEC Power!) Join Date: Jan 2007 Posts: 1,044 Location: Te Puke	DOBI Super Lows Hi guys and girls, Just purchased some DOBI Super Lows for my car and I hear that they are pretty damn low... now I am wondering what I have got myself into! Do you think ya'll could post up some pictures of cars with the superlows fitted so I can get some idea. Thanks!! __________________ *For that custom tee you've always wanted...* http://www.sendatee.co.nz

9th July 2007, 10:02 AM	#2 (permalink)
[QUIKdc2] Senior Member 8,000rpm (B Series Redline!) Join Date: Jan 2005 Posts: 4,870 Location: Tauranga	That's awesome!!!! Just sack it __________________ Ex - DC2 14.2 @ 155km/h \| Current - 95 GT Legacy Wagon

9th July 2007, 10:04 AM	#3 (permalink)
Nicolla Senior Member 5,000rpm (VTEC Power!) Join Date: May 2007 Posts: 1,396 Location: Tauranga	Just avoid speed bumps around bayfair and don't drive down the strand in town two places my car will never go :s __________________ My pain is caused by my pleasure

9th July 2007, 10:09 AM	#4 (permalink)
[QUIKdc2] Senior Member 8,000rpm (B Series Redline!) Join Date: Jan 2005 Posts: 4,870 Location: Tauranga	I just scrape, whatever's scraping will wear out, and eventually it'll stop. __________________ Ex - DC2 14.2 @ 155km/h \| Current - 95 GT Legacy Wagon

9th July 2007, 10:24 AM	#5 (permalink)
DrRubber Senior Member 18,000rpm+ Honda F1! Join Date: Apr 2006 Posts: 10,678 Location: Auckland	It wont be that low.........still drivable as........ and as mentioned if anything is scraping on the ground it will wear off soon enough FIT THEM...then pics :wink: [/b] __________________ Why do I need to comment on Robbie failing.......robbie is the grand master of fail

9th July 2007, 11:38 AM	#6 (permalink)
Danielle Senior Member 5,000rpm (VTEC Power!) Join Date: Jan 2007 Posts: 1,044 Location: Te Puke	Have been told it will drop about 45mm so wont even tuck the tires as far as I can see... Avoiding bayfair and the strand is no problem, I'm not much for cruising... Now all I have to do is avoid the neverending potholes we have springing up around here lately!! Cheers all! __________________ *For that custom tee you've always wanted...* http://www.sendatee.co.nz

9th July 2007, 12:32 PM	#7 (permalink)
SK1TZ- EF Senior Member 7,000rpm (Peak Power) Join Date: Aug 2006 Posts: 3,568 Location: Upper Hutt	45mm is bugger all, you will be wanting it to drop more.. I just put some 35mm TEINs in my EF and I hardly notice the drop, still get 2 fingers under the rears...although I do have to allow for Sagg Good luck sam __________________ NEW JOB!--> www.blackwoodspaykels.co.nz Big thanks to all who have helped with muscle and info, you all know who ya are! WSC f0 LyF

9th July 2007, 12:44 PM	#8 (permalink)
Danielle Senior Member 5,000rpm (VTEC Power!) Join Date: Jan 2007 Posts: 1,044 Location: Te Puke	Hmmm. You have got me thinking now... Will see what the outcome is once their in and we shall have a group vote! __________________ *For that custom tee you've always wanted...* http://www.sendatee.co.nz

9th July 2007, 12:57 PM	#9 (permalink)
[QUIKdc2] Senior Member 8,000rpm (B Series Redline!) Join Date: Jan 2005 Posts: 4,870 Location: Tauranga	Mine didnt sag, they rose!!! 8O __________________ Ex - DC2 14.2 @ 155km/h \| Current - 95 GT Legacy Wagon

10th July 2007, 06:29 AM	#10 (permalink)
Horny_Devil Senior Member 18,000rpm+ Honda F1! Join Date: Jun 2002 Posts: 12,498 Location: Auckland	thats mine with 45mm springs in it, (i think they are cobra springs) not to bad really __________________ D Series Guru My Profile - My Website - My Build Thread V2.0

10th July 2007, 02:03 PM	#11 (permalink)
VTEC22 Senior Member 6,000rpm (Max Torque) Join Date: Dec 2004 Posts: 2,181 Location: Hamilton	Your worried about springs being to low??? Weaksauce __________________ Wong Beysest 2009 Wok and tuck specialists

18th July 2007, 09:12 PM	#12 (permalink)
d0cilecd6 Member 700rpm (Idle) Join Date: Jul 2007 Posts: 37 Location: Hastings	Heres mine with Dobi Superlows in it, was too high for my liking. Adjustables all the way __________________ axle snapper

19th July 2007, 08:44 PM	#13 (permalink)
DVSCVC Senior Member 4,000rpm (Taxi Drag) Join Date: Mar 2006 Posts: 608 Location: Hamilton	Here's my EF with Dobi Superlows in it.. __________________ [MX LIFE] -SR20DET Powered Toyota Hiace Project X-Sports NZ - Join The Revolution @ http://www.xsportsnz.net

20th July 2007, 06:59 AM	#14 (permalink)
Green Machine Senior Member 6,000rpm (Max Torque) Join Date: Dec 2005 Posts: 2,030 Location: Te Puke	heres a pic of Danielles civic with the super lows in it. They dropped abit more after a day driving. Low in back but high in front. A b18c will fix that with a bit of extra weight __________________ b18cR nzdm eg.. 143kws..not enough... Always for sale at the right price.

21st July 2007, 04:00 PM	#15 (permalink)
SQUERT Senior Member 8,000rpm (B Series Redline!) Join Date: Sep 2003 Posts: 4,737 Location: Auckland	mmm not too bad, you'll get used to them and want to go lower though I guarentee it __________________ Previously $CENSLS1$

22nd July 2007, 11:18 AM	#16 (permalink)
SK1TZ- EF Senior Member 7,000rpm (Peak Power) Join Date: Aug 2006 Posts: 3,568 Location: Upper Hutt	all this talk... i got my 35/40mm TEINs in while I did my swap.... It was a Go-Kart prior, so I am damn keen to drive it to see how much better it is ops: Probably more so than the extreeeme Vtak qualitie my car will now offer. sniff ahh well, best start saving to drop it in to mates work for diagnosis :wink: sam __________________ NEW JOB!--> www.blackwoodspaykels.co.nz Big thanks to all who have helped with muscle and info, you all know who ya are! WSC f0 LyF

22nd July 2007, 03:13 PM	#18 (permalink)
MS JDM Senior Member 3,000rpm (Grandma Drag) Join Date: Oct 2006 Posts: 253 Location: Christchurch	Low schmo, thats nothing!!! If its not scraping then it's not low enough! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode