sway bars

ryan540 · 5th July 2007, 08:07 PM

are the sway bars on eg civics and dc2 tegs the same size??

CamB · 5th July 2007, 09:17 PM

I think you'll find that depends on which end, and which EG and/or DC2.

They interchange, if that's what you want to know. I'm sure there is a good thread here somewhere with it all listed. EG5 was like 22mm front and 15mm rear. DC2R 24mm front and 22mm rear - I only know these ones (and am hazy on the details) because this is what I upgraded to.

PizzaBoy · 5th July 2007, 10:32 PM

and normal DC2 is 24mm front 14mm rear

typalo · 6th July 2007, 11:49 AM

eg5 is 14mm rear just ripped mine out yesterday, looks so dinky compared to a whiteline 24mm one

Coupe-R · 6th July 2007, 11:53 AM

I have an EJ and i think the front is 21mm or 20.5mm its an odd ball one cause its USA

ryan540 · 6th July 2007, 12:24 PM

sweet cheers guys

5th July 2007, 08:07 PM	#1 (permalink)
ryan540 Senior Member 4,000rpm (Taxi Drag) Join Date: Sep 2006 Posts: 705 Location: Dunedin	sway bars are the sway bars on eg civics and dc2 tegs the same size??

5th July 2007, 10:32 PM	#3 (permalink)
PizzaBoy Senior Member 6,000rpm (Max Torque) Join Date: Feb 2002 Posts: 2,233 Location: Wellington	and normal DC2 is 24mm front 14mm rear __________________ 96 Integra SiRII :: Wannabe race kaa \| 1991 Holden Commodore V6 :: Towkaa of d00m 126.0fwkw \| 14.03 @ 98mph \| 46.5 @ Old Taupo \| 1:47.7 @ Taupo Track1 \| 1:22.1 @ Manfeild

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

5th July 2007, 09:17 PM	#2 (permalink)
CamB Senior Member 700rpm (Idle) Join Date: Jan 2007 Posts: 199 Location: Auckland	I think you'll find that depends on which end, and which EG and/or DC2. They interchange, if that's what you want to know. I'm sure there is a good thread here somewhere with it all listed. EG5 was like 22mm front and 15mm rear. DC2R 24mm front and 22mm rear - I only know these ones (and am hazy on the details) because this is what I upgraded to.

6th July 2007, 11:49 AM	#4 (permalink)
typalo Senior Member 3,000rpm (Grandma Drag) Join Date: Jul 2006 Posts: 238 Location: Lower Hutt	eg5 is 14mm rear just ripped mine out yesterday, looks so dinky compared to a whiteline 24mm one

6th July 2007, 11:53 AM	#5 (permalink)
Coupe-R Senior Member 9,000rpm (S2000 Redline!) Join Date: Apr 2002 Posts: 6,965 Location: Tauranga	I have an EJ and i think the front is 21mm or 20.5mm its an odd ball one cause its USA

6th July 2007, 12:24 PM	#6 (permalink)
ryan540 Senior Member 4,000rpm (Taxi Drag) Join Date: Sep 2006 Posts: 705 Location: Dunedin	sweet cheers guys