Front sway bar help- needs pics

b16a2 · 26th July 2006, 04:47 PM

I have a dc1 integra with no front sway bar
I now want to install a sway bar, and just wana see other setups, so i can see mounting points etc

so if anybody can get me pics of a dc2 or itr front sway bar
- of the mounts/brackets and mounting points to the subframe
-of the tie end and where they mount to control arms??

thanks for the help

Haydz · 26th July 2006, 09:32 PM

Shouldn't this be in the handling section?

I may be wrong but i thought all Hondas came standard with a front sway bar? if not they will be super sloppy, worse than a hooker after a hard nights work.

Usually they connect onto the lower control arm and up around the steering rack area.

blizard · 26th July 2006, 09:43 PM

Have a look at mine in the weekend if you want.

notorious1_85 · 26th July 2006, 09:53 PM

walk down the road to look at mine or aarons...

im unsure if my EJ has one.. but i know aaron has a front sway bar...

Hayce · 26th July 2006, 10:06 PM

heh no idea if this is a help or not but the ITR bar uses end likages that go through the lower arm.
My EK civic's linkages mount to the front arm not directly through it via a little 90 degree bracket.

Coupe-R · 27th July 2006, 01:20 PM

don't put one on.
youll be much better fitting a type r rear sway bar
and having firm springs and shocks

defy · 28th July 2006, 07:11 AM

hey,

you'll need lower control arms that have the swayhole for the linkages to bolt through, and the U-brackets/bushes to bolt to underneath the subframe.

DC2 (type r/b18C) will have single balljoint type links and all EG / non vtec DC will have a simple threaded rod with bushes on it only and nuts on either end.

26th July 2006, 04:47 PM	#1 (permalink)
b16a2 Senior Member 6,000rpm (Max Torque) Join Date: Nov 2005 Posts: 2,285 Location: Howick	Front sway bar help- needs pics I have a dc1 integra with no front sway bar I now want to install a sway bar, and just wana see other setups, so i can see mounting points etc so if anybody can get me pics of a dc2 or itr front sway bar - of the mounts/brackets and mounting points to the subframe -of the tie end and where they mount to control arms?? thanks for the help __________________ www.ISLMotorsport.co.nz --- Pm me for CUSTOM FABRICATION; headers, manifolds, exhausts, turbo setups, Chasis Prep etc. MyWork ___________________JESUS Loves U___

26th July 2006, 09:32 PM	#2 (permalink)
Haydz Senior Member 7,000rpm (Peak Power) Join Date: Jan 2005 Posts: 3,373 Location: Tauranga	Shouldn't this be in the handling section? I may be wrong but i thought all Hondas came standard with a front sway bar? if not they will be super sloppy, worse than a hooker after a hard nights work. Usually they connect onto the lower control arm and up around the steering rack area. __________________ I fucked Elvis Presley in the bathroom where he died.

26th July 2006, 09:43 PM	#3 (permalink)
blizard Senior Member 4,000rpm (Taxi Drag) Join Date: Jul 2004 Posts: 682 Location: Auckland	Have a look at mine in the weekend if you want. __________________ Profile

26th July 2006, 09:53 PM	#4 (permalink)
notorious1_85 Senior Member 5,000rpm (VTEC Power!) Join Date: Jan 2005 Posts: 1,108 Location: Auckland	walk down the road to look at mine or aarons... im unsure if my EJ has one.. but i know aaron has a front sway bar... __________________ Project EJ #711 Black Hawk http://profiles.nzhondas.com/profile.php?id=1744

26th July 2006, 10:06 PM	#5 (permalink)
Hayce Senior Member 9,000rpm (S2000 Redline!) Join Date: May 2005 Posts: 7,035 Location: Hamilton	heh no idea if this is a help or not but the ITR bar uses end likages that go through the lower arm. My EK civic's linkages mount to the front arm not directly through it via a little 90 degree bracket. __________________ ....................................EK molester!..................gtrefinishers

27th July 2006, 01:20 PM	#6 (permalink)
Coupe-R Senior Member 9,000rpm (S2000 Redline!) Join Date: Apr 2002 Posts: 6,965 Location: Tauranga	don't put one on. youll be much better fitting a type r rear sway bar and having firm springs and shocks

28th July 2006, 07:11 AM	#7 (permalink)
defy Team NZH: Retired 5,000rpm (VTEC Power!) Join Date: Feb 2002 Posts: 1,463 Location: Auckland	hey, you'll need lower control arms that have the swayhole for the linkages to bolt through, and the U-brackets/bushes to bolt to underneath the subframe. DC2 (type r/b18C) will have single balljoint type links and all EG / non vtec DC will have a simple threaded rod with bushes on it only and nuts on either end. __________________ Special thanks to ---> Gecko .... playing other peoples music and spining rotors...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode