Whats your To-Do List For NIMM?

[SLOTEG]

today at work i had a bit of time to sit around and drink coffee and think, and i got onto the topic of what i need to do to get my car ready for NIMM:

• new 15inch wheels for daily use, swap my 14s for sammys lightweight thunderbird 1 wheels and fit semis
• replace/skim discs and fit some ebc pads, brake fluid change
• change a rooted inner cv
• new headers and exhaust
• silicone up engine mounts
• c pillar brace
• find a bucket seat to use so i dont fly around the cabin
• normal maintenance things - oil n filter, plugs, coolant, g/box oil etc

so hows everyone elses lists looking?

[bmgjet]

• Get manual steering rack in.
• Fix cross member mount.
• Get 2 dyno runs for tuning.
• Pray that nothing else comes up that needs fixing.
• Save enough money.

If I get all those done in time then ill be coming.

[Demon]

• buy new engine, build and install
• paint engine bay
• refit EVERYTHING
• remount/rewire guages
• machine warped rotors (replace if i have to).
• change suspension
• get it TUNED
• certed and wof'd
• re-mount front kit
• thats all i can think of off the top of my head lol

[VTEC22]

hahahah i got lots to do lol

[Bl4ckt0p]

Same haha. Heres mine that I can think of:

Install Mugen headers
Install Mugen Exhaust and twinloop
Buy/install slotted rotors
Buy/install new brake pads
Put Gizzmo ecu in
Put momo seat in
Put rear strut brace on
Put rear lower brace on
Put Mugen front lip on
Sort out my suspension (at this stage ITR shocks and Jamex springs )
Plus I want to do maintenance things like oil, filter, gearbox oil, leads, plugs, coolant etc

Once exams are finished most of that list should be done and have a few more things which will be in my build.

[Sleepy]

Sorted: Caliper upgrade/slotted rotors

Either:

More Motul fluid - wasted mine RBF660 too, yeah thats right 660 (wtf is the diff lol): [
Braided Lines
BCS - on the way!
F+R Strut Braces
22mm Rear Swaybar
Half decent coilovers
Formula Pads - sitting at work staring me down

And thats just so I can go round corners

Or:
Steal TuLaLit's car lol

[itsjdm]

cert, paint bumper

[95ITR]

Change oil, ready for trackday.

[b_series_power]

- new wheels
- semi slicks
- front and rear adjustable camber arms
- tie bar
- maybe a 21mm blox sway bar
- harness (on the way)
- maybe a engine rebuild getting quite tired

[nemesisteg]

just the one thing for me to do..


*grow a pair of big hairy balls!! haha gags
thats just a dig at my early braking.. think maybe just some better pads will do the trick aye ian?? lol

[b_series_power]

Originally Posted by nemesisteg

just the one thing for me to do..


*grow a pair of big hairy balls!! haha gags
thats just a dig at my early braking.. think maybe just some better pads will do the trick aye ian?? lol

is your car fully tuned now?

[brenth]

ive got a few things to buy/install before nimm:

-Install 282mm znoelli s12's and 98spec itr callipers, motul rbf600 fluid
-Buy and install blox 21mm rear sway bar and get some subframe reinforcement
-buy and install password jdm 3 point front and 2 point reaqr strut braces (when they get here )
-buy and install skunk2 intake pro manifold and get ecu chipped and tuned with crome
-decide what suspension i want and then buy and install
-gearbox fluid with mtf, oil and filter, leads maybe plugs

may be some other stuff but most of the above stuf requires a fair bit of saving haha. already have the brake setup though, just waiting on the callipers from lance (hayce)

[del-solider]

Not that much for me really:

• Buy/Install rear sway bar(still deciding what type any ideas would be kool
• New pads looking at some race/street pads and some new fluid
• Headers!
• And then the usual oil change general maintenance etc.

[tegRatypeR]

Whoa some of you guys have rather long lists, haha.

Err ok;
-get my springs put in
-rear and side skirts fitted & a panel and paint


That's about it.

[Demon]

Moar Added

• install new brakes in Jareds car
• install CamFC
• Remove fix and install gearbox back into Jareds car
• Install Cam Gears
• Install DC Sports headers!!!]

fuck that boy has to much money! so much bling1

[BWDOWN]

Gazmaster and I need to do the following:

*Drink 6 bottles of Canadian Club
*Get on the chop with as many NZH peeps as possible
*Buy new Callaway Clubs
*Enjoy many nights out in town
*Practice 4 rounds of golf
*own NIMM and the Golf round




ours are easier than most yours

[nemesisteg]

nah bro car still hasnt been finish tuned.. working on it LOL

[Kiwi XTR2]

1 - Sort out bulletcam
2 - Remember to lock fuelcap

[Loudsoundz]

New Hawk HP+ pads
Skim rotors/Buy new ones
Drop the car abit more for handling.

/list

Oh and of course, brake bleed and oil change

[VTAKYO]

Originally Posted by 95ITR

Change oil, ready for trackday.

Haha! The way it should be !

But I guess when somebody only races once/twice a year then they want to get everything possible done to enjoy it the most.

[Snoozin]

- do prelude 282mm brake upgrade (new pads and OEM rotors)
- possibly find race seat and mount
- fix exhaust leak
- fit freer flowing rear muffler
- oil and fluid change prior to weekend
- fill with petrol
- ???
- profit.

[Danielle]

Install new radiator fan as current is .... now in the bin
Headers collector modded to 2.5"
New 2.5" mandrel bent exhaust fitted
Chip & Tune (road and dyno)
Brake pad upgrade - some form of EBC
Hopefully different suspension setup (current is crap)

Maybe a radiator upgrade also... alloy maybe...

[Green Machine]

I need to sort out brakes (prolly just give them new fluid as the pads have only had afew months use (ebc red stuff)
Upgrade to a full size alloy radiator,
Get another set of rims and slap some semis on them.
sort out new shifter and gear knob as current is crap and put in my password jdm bushes.
strip rest of tar out of car.
Maybe get a decent seat.
Then save for the billion dollars a litre gas will cost then.

[madDC4]

Well I aint racing.. so my list involves

-finding accomodation
-buying alcohol, a high percentage preferably..

and thats about it!

[XPLOIT]

Originally Posted by Demon

Moar Added

• install new brakes in Jareds car
• install CamFC
• Remove fix and install gearbox back into Jareds car
• Install Cam Gears
• Install DC Sports headers!!!]

fuck that boy has to much money! so much bling1

Haha, not too much money, too much debt


- Get car into storage so I can start working on it
- Remove Gearbox
- Fix Gearbox
- Refit Gearbox
- Install DC Sport Headers
- Install Skunk2 Cam Gears
- New Cambelt
- Install CamFC
- Tune CamFC
- Install Mugen Slotted Rotors
- Install EBC Yellow Pads
- Install Tien rear strut brace
- Remove Interior/Sub and Amp
- Flip tires on rims
- Buy pair of Semi's (R888s)
- Remove bumper so I can get a Wheel Alignment
- Cert/WOF
- Make travel bookings
- Start shannigans