ef project finished

siknes · 20th April 2006, 06:28 AM

finished it on saturday..

specs are:
b16a ( 102 ***k's )
TCS- headers
ct26 with to4e internals
tail 38 external
hks bov
vr4 injectors
fin and tube intercooler with coustem TCS plumbing
coustem TCS full 3* exhuast with rps 5" tip
gizzmo IBC
gizzmo Tach Recall Shiftlight
gizzmo launch Interface
soon wil hopefully be runing a link
here are some pics

will put up some more once bov is fitted!!

xuanyu · 20th April 2006, 08:40 AM

what you gonna use this car for?

nva2nd · 20th April 2006, 08:46 AM

I think he said awhile back his daily.

FA5T R · 20th April 2006, 08:52 AM

Looks mean one quick daliy

VTAKYO · 20th April 2006, 10:59 AM

Daaamn! Thats a mighty tight fit. Very impressive work mate. :thumbsup: Mean as daily driver.

phonix · 20th April 2006, 07:32 PM

You should heat wrap the up - pipe from the turbo to the intercooler. That shit is going to superheat sitting that close to the mani. Colder charge = more power.

Green Machine · 20th April 2006, 09:03 PM

Damn thats mean but its sure as hell going to collect them bugs now

FERIOK1D · 20th April 2006, 09:45 PM

awesome man, looks wicked! bet it goes too ..
b00st3d h0nd4 4 t3h win!!

EGizzleSizzle · 20th April 2006, 10:25 PM

Yaaawwn, yet another whizz bang turbo Honda...

Pretty good DIY effort though. Now all you need to do is mount your intercooler to something a little more substantial than the filler panel and grind those terrible T O Y O T A letters off your turbs and you''l be saweetah! Happy boosting! :thumbsup:

Macros · 20th April 2006, 10:36 PM

by finished you mean "finished except for the front bumper which im putting on later"?

David R · 21st April 2006, 06:13 AM

Quote:

Originally Posted by phonix

You should heat wrap the up - pipe from the turbo to the intercooler. That shit is going to superheat sitting that close to the mani. Colder charge = more power.

I get the feeling it's not going to matter much with an intercooler that size. The piping on my gtx went straight past the exhaust housing, and even with just a standard VR4 ic the piping after was still cold to touch.

Are you going to HPC the manifold and plumbing??

siknes · 21st April 2006, 06:22 AM

yes i am going to HPC the manifold and plumbing. just wana sort out the ecu first. i will also buy some exhuast wrap to wrap the mani and i/c pipe :evil: :evil:
as far as the bumper goes, i think there will only be little bits on the side left of it :?: :wink: :evil:

siknes · 21st April 2006, 06:25 AM

ohh yeah

still gota make brackets to support the fridge :wink: :wink:

Anti-clockwise · 21st April 2006, 10:09 AM

what bumper r u gonna use??

tarmac- · 21st April 2006, 01:22 PM

whats that dudes name that did that fukoff burnout at nzh V toyota drags in that turbo ef9?.

hes running a fridge the same size as yours and made it to fit. your just going to have to cut a shitload out of the middle section. your piping looks like itll clear; maybe the left side of the pic may need abit of a chop.

sidenote, has anyone heard from llew lately?. trying to get hold of him to tune up this car but no luck so far.

siknes · 21st April 2006, 04:11 PM

ahah cheers zac yeah im trying to get hold of llew as well..
ill keep trying though... :evil: :evil:
stephan

VTECEM · 23rd April 2006, 10:51 AM

Boost EM!

siknes · 25th April 2006, 05:11 PM

siknes · 25th April 2006, 05:11 PM

20th April 2006, 06:28 AM	#1 (permalink)
siknes Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2005 Posts: 218	ef project finished finished it on saturday.. specs are: b16a ( 102 **k's ) TCS- headers ct26 with to4e internals tail 38 external hks bov vr4 injectors fin and tube intercooler with coustem TCS plumbing coustem TCS full 3 exhuast with rps 5" tip gizzmo IBC gizzmo Tach Recall Shiftlight gizzmo launch Interface soon wil hopefully be runing a link here are some pics will put up some more once bov is fitted!! __________________ i'm a tard

20th April 2006, 08:40 AM	#2 (permalink)
xuanyu Senior Member 5,000rpm (VTEC Power!) Join Date: Oct 2004 Posts: 1,132 Location: Wellington	what you gonna use this car for? __________________ check this out.JDM DC5R.http://profiles.nzhondas.com/profile...e=view&id=1553

20th April 2006, 08:52 AM	#4 (permalink)
FA5T R Senior Member 3,000rpm (Grandma Drag) Join Date: Oct 2005 Posts: 206	Looks mean one quick daliy __________________ JDM

20th April 2006, 10:59 AM	#5 (permalink)
VTAKYO Team NZH: Retired 11,000rpm (Spoon B16B!!) Join Date: Jul 2004 Posts: 9,546 Location: Christchurch	Daaamn! Thats a mighty tight fit. Very impressive work mate. :thumbsup: Mean as daily driver. __________________ ¤ Smashing Magazine ¤ Pokerstars ¤ ¤ So 2.0 Fresh Even My Sandwiches Have Rounded Corners and Drop Shadows ¤

20th April 2006, 07:32 PM	#6 (permalink)
phonix Senior Member 5,000rpm (VTEC Power!) Join Date: May 2005 Posts: 1,312 Location: Outside NZ: United Kingdom	You should heat wrap the up - pipe from the turbo to the intercooler. That shit is going to superheat sitting that close to the mani. Colder charge = more power. __________________ Profile here. 200fwkw caged DA6-T, build thread here.

20th April 2006, 08:46 AM	#3 (permalink)
nva2nd Senior Member 7,000rpm (Peak Power) Join Date: Dec 2005 Posts: 3,622 Location: Hamilton	I think he said awhile back his daily.

20th April 2006, 09:03 PM	#7 (permalink)
Green Machine Senior Member 6,000rpm (Max Torque) Join Date: Dec 2005 Posts: 2,029 Location: Te Puke	Damn thats mean but its sure as hell going to collect them bugs now

20th April 2006, 09:45 PM	#8 (permalink)
FERIOK1D Senior Member 4,000rpm (Taxi Drag) Join Date: Nov 2005 Posts: 892	awesome man, looks wicked! bet it goes too .. b00st3d h0nd4 4 t3h win!! __________________ www.CIVIC-COUNCIL.co.nz

20th April 2006, 10:25 PM	#9 (permalink)
EGizzleSizzle Team NZH: Mod 4,000rpm (Taxi Drag) Join Date: Sep 2004 Posts: 838	Yaaawwn, yet another whizz bang turbo Honda... Pretty good DIY effort though. Now all you need to do is mount your intercooler to something a little more substantial than the filler panel and grind those terrible T O Y O T A letters off your turbs and you''l be saweetah! Happy boosting! :thumbsup: __________________ www.workshopx.co.nz Loaf of bread, container of milk and a stick of butter

20th April 2006, 10:36 PM	#10 (permalink)
Macros Senior Member 7,000rpm (Peak Power) Join Date: Jul 2003 Posts: 3,759 Location: Auckland	by finished you mean "finished except for the front bumper which im putting on later"? __________________ University of Auckland Formula SAE UPFM - 107.5FM Auckland 10pm Sundays

21st April 2006, 06:22 AM	#12 (permalink)
siknes Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2005 Posts: 218	..... yes i am going to HPC the manifold and plumbing. just wana sort out the ecu first. i will also buy some exhuast wrap to wrap the mani and i/c pipe :evil: :evil: as far as the bumper goes, i think there will only be little bits on the side left of it :?: :wink: :evil: __________________ i'm a tard

21st April 2006, 06:25 AM	#13 (permalink)
siknes Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2005 Posts: 218	.... ohh yeah still gota make brackets to support the fridge :wink: :wink: __________________ i'm a tard

21st April 2006, 10:09 AM	#14 (permalink)
Anti-clockwise Senior Member 4,000rpm (Taxi Drag) Join Date: Aug 2004 Posts: 598 Location: North Shore City	what bumper r u gonna use??

21st April 2006, 01:22 PM	#15 (permalink)
tarmac- Senior Member 5,000rpm (VTEC Power!) Join Date: Nov 2004 Posts: 1,451 Location: Auckland	whats that dudes name that did that fukoff burnout at nzh V toyota drags in that turbo ef9?. hes running a fridge the same size as yours and made it to fit. your just going to have to cut a shitload out of the middle section. your piping looks like itll clear; maybe the left side of the pic may need abit of a chop. sidenote, has anyone heard from llew lately?. trying to get hold of him to tune up this car but no luck so far. __________________ ∟ dnb drops

21st April 2006, 04:11 PM	#16 (permalink)
siknes Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2005 Posts: 218	,..... ahah cheers zac yeah im trying to get hold of llew as well.. ill keep trying though... :evil: :evil: stephan __________________ i'm a tard

23rd April 2006, 10:51 AM	#17 (permalink)
VTECEM Senior Member 6,000rpm (Max Torque) Join Date: Sep 2003 Posts: 1,537 Location: Auckland	Boost EM! __________________ Watch this space.... Project DC2

25th April 2006, 05:11 PM	#18 (permalink)
siknes Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2005 Posts: 218	..... ay?? __________________ i'm a tard

25th April 2006, 05:11 PM	#19 (permalink)
siknes Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2005 Posts: 218	..... ay?? __________________ i'm a tard

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode