Well done guys

2nd February 2005, 02:58 PM

i give up.

freestylin_hamster · 2nd February 2005, 03:09 PM

Does anyone have that picture of a box of tissues?

Can i just say its a huge joke for you to go onto forums and post this randomly at people.

Chur.

calibre · 2nd February 2005, 03:10 PM

is this based on any threads on THIS site, as I can't remember seeing any rubbishing him on here

I have huge respect for the guy, and his insane machine, and I'm sure most others do also. go post on NZPC if you wanna cry at people.

*sic · 2nd February 2005, 03:11 PM

i hear justin...

"cry me a river, oh, cry me a riverrr, oh, cry me cry me, cry me cry meee"

Lith · 2nd February 2005, 03:16 PM

Quote:

Originally Posted by Aaron

Congrats to you all on rubbishing Andre/Docile.

Did you know he wasnt running his proper gearbox, coz of issues at Battle Day the prior weekend? And without his proper gearbox, he wouldnt be able to run any decent times?

Aaron, I would have expected a little better from you. I understand that there was what, 2 - maybe 3 people from NZHondas bagging Speedtech's efforts... they are little shits who have a vacuum between their ears, they aren't worth paying attention to and DEFINATELY not worth bagging everyone on this forum for.

Go to NZMMC, which is supposed to be a Mitsi supporters forum and post the same thing!!!!! Because proportionally there is the same amount of people bagging DOCILE.

EVLEVO · 2nd February 2005, 03:27 PM

Quote:

Originally Posted by Aaron

i give up.

Good :twisted:

2HEKTK · 2nd February 2005, 03:42 PM

Aaron,

I can understand where you are coming from! I despise people who bag others efforts especially when they haven't proved themselves. The few who have bagged Andre and DOCILE's efforts are just a small bunch of haters living off hype thats been created . I personally have followed his build over the last 12 months, the workmanship is the best around and can't wait for him to sort the small teething problems.
Big ups to the speedtech crew for putting on a show even with no hope of achiveing there altimate goal for the weekend!!

:thumbsup: :thumbsup: :thumbsup: :thumbsup: Speedtech and Andre!

Im going to lock this it needn't go any further!

2nd February 2005, 02:58 PM	#1 (permalink)
Aaron Guest Posts: n/a	Well done guys i give up.

2nd February 2005, 03:09 PM	#2 (permalink)
freestylin_hamster Senior Member 7,000rpm (Peak Power) Join Date: Jun 2003 Posts: 4,157 Location: Wellington	Does anyone have that picture of a box of tissues? Can i just say its a huge joke for you to go onto forums and post this randomly at people. Chur. __________________ Ex: [GTCNDY] EG Hatch \| Current: WRX - RWDriving

2nd February 2005, 03:11 PM	#4 (permalink)
sic Senior Member 5,000rpm (VTEC Power!)* Join Date: May 2002 Posts: 1,207	i hear justin... "cry me a river, oh, cry me a riverrr, oh, cry me cry me, cry me cry meee" __________________ Ghost in the Machine The Crx and CBR

2nd February 2005, 03:42 PM	#7 (permalink)
2HEKTK Team NZH: Mod 8,000rpm (B Series Redline!) Join Date: May 2003 Posts: 4,488 Location: Taupo	Aaron, I can understand where you are coming from! I despise people who bag others efforts especially when they haven't proved themselves. The few who have bagged Andre and DOCILE's efforts are just a small bunch of haters living off hype thats been created . I personally have followed his build over the last 12 months, the workmanship is the best around and can't wait for him to sort the small teething problems. Big ups to the speedtech crew for putting on a show even with no hope of achiveing there altimate goal for the weekend!! :thumbsup: :thumbsup: :thumbsup: :thumbsup: Speedtech and Andre! Im going to lock this it needn't go any further! __________________ No roll cage, No harness, No run-offs, No brakes - www.nzoffshore.co.nz [H17] Sonic 1900 SS BF150 2.4 litre DOHC VTEC - Tarmac is for pussy's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2nd February 2005, 03:10 PM	#3 (permalink)
calibre Senior Member 7,000rpm (Peak Power) Join Date: Dec 2003 Posts: 2,841 Location: Outside NZ: United Kingdom	is this based on any threads on THIS site, as I can't remember seeing any rubbishing him on here I have huge respect for the guy, and his insane machine, and I'm sure most others do also. go post on NZPC if you wanna cry at people.