CF4 SiR/SiR-T, CL1 EuroR Owners

tuned-r · 24th June 2008, 11:27 PM

Starting a thread on the above JDM Accord.
Ownership, mods,Tech., issue's, Need help?

I have a 2002 EuroR CL1.

Cheers

T-R

DURTYEF3 · 24th June 2008, 11:33 PM

Heaps of info through nzh if you search, but yeah

SIR = Automatic - 180hp (F20b)
SIR-T = Manual - 200hp (F20b)

Missus has a SIR-T. Nice and smooth to drive, good cruiser and has a bit of power.

tuned-r · 24th June 2008, 11:39 PM

Last set up without engine re-build achieved 212hp on wheel.
Re-building my engine in July'08 with the help from Jun Engineering people.
Putting in Skunk2 Cams and other supporting hardware and tune up with Fcon-S.

T-R

Bananaman · 25th June 2008, 09:39 AM

This is not a build thread. Wrong section.

Try Tech help

lazyman · 25th June 2008, 10:17 AM

Quote:

Originally Posted by Bananaman

This is not a build thread. Wrong section.

Try Tech help

Agree

tuned-r · 26th June 2008, 02:13 AM

Quote:

Originally Posted by lazyman

Agree

Thanks Guys.

T-R

24th June 2008, 11:27 PM	#1 (permalink)
tuned-r Junior Member 700rpm (Idle) Join Date: Jun 2008 Posts: 15 Location: Ngongotaha	CF4 SiR/SiR-T, CL1 EuroR Owners Starting a thread on the above JDM Accord. Ownership, mods,Tech., issue's, Need help? I have a 2002 EuroR CL1. Cheers T-R

24th June 2008, 11:33 PM	#2 (permalink)
DURTYEF3 Senior Member 7,000rpm (Peak Power) Join Date: Jun 2006 Posts: 3,665 Location: Papatoetoe	Re: CF4 SiR/SiR-T, CL1 EuroR Owners Heaps of info through nzh if you search, but yeah SIR = Automatic - 180hp (F20b) SIR-T = Manual - 200hp (F20b) Missus has a SIR-T. Nice and smooth to drive, good cruiser and has a bit of power. __________________ \| DC2 Project \| DC Squad \| Bros Engineering Ltd\|

24th June 2008, 11:39 PM	#3 (permalink)
tuned-r Junior Member 700rpm (Idle) Join Date: Jun 2008 Posts: 15 Location: Ngongotaha	Re: CF4 SiR/SiR-T, CL1 EuroR Owners Last set up without engine re-build achieved 212hp on wheel. Re-building my engine in July'08 with the help from Jun Engineering people. Putting in Skunk2 Cams and other supporting hardware and tune up with Fcon-S. T-R

25th June 2008, 09:39 AM	#4 (permalink)
Bananaman Senior Member 8,000rpm (B Series Redline!) Join Date: Jun 2004 Posts: 4,328 Location: Foxton Beach	Re: CF4 SiR/SiR-T, CL1 EuroR Owners This is not a build thread. Wrong section. Try Tech help __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CL1 EuroR Engine Bay??	m1k30rz	General Discussion	1	17th June 2008 11:25 AM
CL1 EuroR Gearbox Problems	CIRCUIT-DUTY	Tech Help	25	12th May 2007 04:30 PM
CL1 EuroR ECU into CF4 Sir-T	eg_head	Tech Help	7	18th April 2007 05:55 AM
(HELP)EuroR + RSM = Rev Cut???	kevch	Tech Help	4	21st December 2006 09:33 PM
WTD: EuroR h22a motor	americ_ian	Parts Exchange	4	7th November 2006 09:42 PM