Type R Build Thread(updated 14/11/08 new pics)

bumpd-EG · 27th May 2008, 10:22 PM

Well first of all I recently took ownership of this 1996 Type R integra, I was quite happy with my new toy until on the drive home from hamilton, I heard a rather large BANG from under the car. pulled over at the BP just by the bombays and had a look couldnt see anything so continued driving. but everytime I seemed to even put my foot down a little bit I would hear this massive BANG sound.
I straight away thought hmmm must be engine mounts. got home and jack the car up to see that oh fuck the gearbox braket and casing and all that were completety broken off and the motor was only holding in by 2 mounts as the front ones were not even bolted on... and someone has made some rangi arse bracket to try and fix it....DODGY!!!. let alone that the brake pads were so fucked that they were down to METAL on METAL..... shit....
the boots completely torn to shit and grease everywhere...
engine check light was on all the way home.....
took the dash out to find wiring fuckin everywhere and shit to my horror someone has hacked at the enginebay at sometime to try do the wiring or something...
so here starts my build thread to tidy up this car and make it into a really tidy ITR that I have always wanted to own.

bumpd-EG · 27th May 2008, 10:27 PM

WHAT THE???

WOH FUCKED????

RANGI BRACKET?

DURTYEF3 · 27th May 2008, 10:31 PM

Good work on startin a new build thread. Did you even check the car before you swapped or anything? Surely you dont buy something like this without giving it a once oveR? or is it just me?..

Goodluck with this though. I've seen your cars and the shit you've done with them so no doubt this will come out looking mint.

bumpd-EG · 27th May 2008, 10:32 PM

so I decided that bugger it, may aswell go all out and build it up.

engine bay stripped down and motor out

got a mint gearbox casing from babi hutan (cheers for your help with the box mate!)

Engine about to get the headgasket done

bumpd-EG · 27th May 2008, 10:35 PM

Quote:

Originally Posted by DURTYEF3

Good work on startin a new build thread. Did you even check the car before you swapped or anything? Surely you dont buy something like this without giving it a once oveR? or is it just me?..

Goodluck with this though. I've seen your cars and the shit you've done with them so no doubt this will come out looking mint.

it was very spur of the moment to be honest. late afternoon and I guess I just trusted the guys word when he said it was "mint" and I had seen that DC2R owned it and had run the numbers down the strip.
and thanks for your last comment

Hayce · 27th May 2008, 10:36 PM

wow I can honestly say I've never seen that done to a honda tranny bracket...

Hondas are renouned for the ease of swap and the ability to avoid well exactly that sort of carry on. Heh at least it didn't break

even though I'm sure you'd rather it did!

Chaos · 27th May 2008, 10:36 PM

looks good, i bet you can't wait to get to fixing up that wiring

bumpd-EG · 27th May 2008, 10:38 PM

tonight I got alot of the bay smoothed off, I am not going all out show car on this just wanted to make it really clean and fresh in the bay.
Stripped it down to bare metal and resealed alot of the edges in the bay gave it a good sand down with the D/A and got rid of alot of scratched up paint.
then mixed up some epoxy primer to protect the steel before I lay down the nice fresh 2 pac primer.

bumpd-EG · 27th May 2008, 10:41 PM

I will have more updates over the next few days.
I to be honest with you cant beleive the state people let things get to and as for the bracket and gearbox, in 6 years of working on hondas and doing over 30+ b series swaps on hondas... I have never seen it myself.
oh well will be mint as in a few weeks/month then yay can actually drive it and have some fun and hopefully run a better time than the 13.7 1/4 mile its apparently run before

DURTYEF3 · 27th May 2008, 10:46 PM

Shit you work fast man. will look very nice indeed mate. you gonna relocate fusebox and battery while you at it? and tuck the wires?

didnt see the pic before of the tranny bracket, but that is rangimods shit.

bumpd-EG · 27th May 2008, 10:55 PM

I want the bay to look like my old white eg civics did but better

4VTECN · 27th May 2008, 10:59 PM

looks like the fusebox and battery are already relocated, as on the first pics above

bumpd-EG · 27th May 2008, 11:07 PM

Quote:

Originally Posted by 4VTECN

looks like the fusebox and battery are already relocated, as on the first pics above

yeah fusebox was cable tied down by the powersteering rack and the battery box was in the boot. screwed to the floor...yup you heard it screwed.... so that has now been replace and bolted into the car properly with massive washers so the box wont rip out if you brake heavy.
The guy who owned this car before me was an absolute "NO IDEA"
ripped the headunit out and left all the live wiring chilling around where the stereo goes. first thing my old man noticed when we drove down the road so quickly got some tape from the gas station and taped it up till we got home.
felt like going back and taking my old car back....

Haim · 28th May 2008, 05:48 AM

looks interesting...keep up the good work

4VTECN · 28th May 2008, 08:23 AM

shiiiiittt....you dont muck around, will be watching this thread very closely

xsiv · 28th May 2008, 08:52 AM

o Man ofter reading this i want to punch they guy in the head. im sure u do too.
their are some dogie people out their

CoupeTurbo · 28th May 2008, 01:37 PM

dam you work fast haha sounds like youve got a it sorted. looks good so far

Slammmed · 28th May 2008, 02:40 PM

ricci bro you work fast! and i must say, all the engine bays you have worked on comes out mint as!

Look forward to seeing the end result

Bananaman · 28th May 2008, 02:55 PM

Nice one indeed. Will watch this as it might just pass me by your doing such a quick job on it.

Jason · 28th May 2008, 05:07 PM

Looking good bro.

myt have to come next door an have a look some time.

bumpd-EG · 28th May 2008, 06:25 PM

I just bought these wheels for the car, sold the standard itr wheels
I dont want to keep these white I am gonna repaint them in a satin bronze or maybe gunmetal colour they are Racing Hart M6 17x7, I have always liked these wheels

Top Secret · 28th May 2008, 06:31 PM

Wow, can't believe the amount of stuff that's gone wrong in a fairly recent car! (1996)
You'd sort of be shocked if it happened to an older car, around 1990 ish, but this is ridiculous!

The guy that sold it is off these forums too.. a quick browse around the For Sale section will find the thread.

Good stuff for getting stuck in so quickly, very impressive!

americ_ian · 28th May 2008, 08:08 PM

LOL,

i cant stop laughing at that... wat is it? a rangified D series L bracket?

lookin good ricci!
i felt the same pain wen i aquired the ae... pulled the whole thing down and started again! .... PLus its a bonus knowing yourself wats in every knook and corner of the whole car... wiring/dodgy welds, lose bolts, broken shiz etc etc

its a simple fact of buying modded cars these days i gues...

BLAZED_RACER · 28th May 2008, 08:26 PM

holy mother of god..

haha now who is the dodgy one.! lol...

will be good to see this all cleaned up ric.

bumpd-EG · 28th May 2008, 08:27 PM

I have no idea but I have ordered another one, after searching and searching last night through here on nzhondas I found a thread relating to why the gearbox was like it is...
anyway who cares its on the mend..
on a good note

another part ready to be installed

27th May 2008, 10:22 PM	#1 (permalink)
bumpd-EG Senior Member 4,000rpm (Taxi Drag) Join Date: May 2006 Posts: 650 Location: Auckland	Type R Build Thread(updated 14/11/08 new pics) Well first of all I recently took ownership of this 1996 Type R integra, I was quite happy with my new toy until on the drive home from hamilton, I heard a rather large BANG from under the car. pulled over at the BP just by the bombays and had a look couldnt see anything so continued driving. but everytime I seemed to even put my foot down a little bit I would hear this massive BANG sound. I straight away thought hmmm must be engine mounts. got home and jack the car up to see that oh fuck the gearbox braket and casing and all that were completety broken off and the motor was only holding in by 2 mounts as the front ones were not even bolted on... and someone has made some rangi arse bracket to try and fix it....DODGY!!!. let alone that the brake pads were so fucked that they were down to METAL on METAL..... shit.... the boots completely torn to shit and grease everywhere... engine check light was on all the way home..... took the dash out to find wiring fuckin everywhere and shit to my horror someone has hacked at the enginebay at sometime to try do the wiring or something... so here starts my build thread to tidy up this car and make it into a really tidy ITR that I have always wanted to own. Last edited by bumpd-EG; 14th November 2008 at 12:54 PM.

27th May 2008, 10:27 PM	#2 (permalink)
bumpd-EG Senior Member 4,000rpm (Taxi Drag) Join Date: May 2006 Posts: 650 Location: Auckland	Re: Type R Build Thread WHAT THE??? WOH FUCKED???? RANGI BRACKET?

27th May 2008, 10:31 PM	#3 (permalink)
DURTYEF3 Senior Member 7,000rpm (Peak Power) Join Date: Jun 2006 Posts: 3,665 Location: Papatoetoe	Re: Type R Build Thread Good work on startin a new build thread. Did you even check the car before you swapped or anything? Surely you dont buy something like this without giving it a once oveR? or is it just me?.. Goodluck with this though. I've seen your cars and the shit you've done with them so no doubt this will come out looking mint. __________________ \| DC2 Project \| DC Squad \| Bros Engineering Ltd\|

27th May 2008, 10:32 PM	#4 (permalink)
bumpd-EG Senior Member 4,000rpm (Taxi Drag) Join Date: May 2006 Posts: 650 Location: Auckland	Re: Type R Build Thread so I decided that bugger it, may aswell go all out and build it up. engine bay stripped down and motor out got a mint gearbox casing from babi hutan (cheers for your help with the box mate!) Engine about to get the headgasket done

27th May 2008, 10:36 PM	#6 (permalink)
Hayce Senior Member 9,000rpm (S2000 Redline!) Join Date: May 2005 Posts: 7,036 Location: Hamilton	Re: Type R Build Thread wow I can honestly say I've never seen that done to a honda tranny bracket... Hondas are renouned for the ease of swap and the ability to avoid well exactly that sort of carry on. Heh at least it didn't break even though I'm sure you'd rather it did! __________________ ....................................EK molester!..................gtrefinishers

27th May 2008, 10:38 PM	#8 (permalink)
bumpd-EG Senior Member 4,000rpm (Taxi Drag) Join Date: May 2006 Posts: 650 Location: Auckland	Re: Type R Build Thread tonight I got alot of the bay smoothed off, I am not going all out show car on this just wanted to make it really clean and fresh in the bay. Stripped it down to bare metal and resealed alot of the edges in the bay gave it a good sand down with the D/A and got rid of alot of scratched up paint. then mixed up some epoxy primer to protect the steel before I lay down the nice fresh 2 pac primer.

27th May 2008, 10:41 PM	#9 (permalink)
bumpd-EG Senior Member 4,000rpm (Taxi Drag) Join Date: May 2006 Posts: 650 Location: Auckland	Re: Type R Build Thread I will have more updates over the next few days. I to be honest with you cant beleive the state people let things get to and as for the bracket and gearbox, in 6 years of working on hondas and doing over 30+ b series swaps on hondas... I have never seen it myself. oh well will be mint as in a few weeks/month then yay can actually drive it and have some fun and hopefully run a better time than the 13.7 1/4 mile its apparently run before

27th May 2008, 10:46 PM	#10 (permalink)
DURTYEF3 Senior Member 7,000rpm (Peak Power) Join Date: Jun 2006 Posts: 3,665 Location: Papatoetoe	Re: Type R Build Thread Shit you work fast man. will look very nice indeed mate. you gonna relocate fusebox and battery while you at it? and tuck the wires? didnt see the pic before of the tranny bracket, but that is rangimods shit. __________________ \| DC2 Project \| DC Squad \| Bros Engineering Ltd\|

27th May 2008, 10:55 PM	#11 (permalink)
bumpd-EG Senior Member 4,000rpm (Taxi Drag) Join Date: May 2006 Posts: 650 Location: Auckland	Re: Type R Build Thread I want the bay to look like my old white eg civics did but better

27th May 2008, 10:59 PM	#12 (permalink)
4VTECN Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,818 Location: Auckland	Re: Type R Build Thread looks like the fusebox and battery are already relocated, as on the first pics above __________________ YBOOST Civic Type R

28th May 2008, 05:48 AM	#14 (permalink)
Haim Senior Member 6,000rpm (Max Torque) Join Date: Oct 2006 Posts: 1,896 Location: Auckland	Re: Type R Build Thread looks interesting...keep up the good work __________________ EX-DC2, DA6, EG4 \| my PICTURE thread \| my Flickr photostream

28th May 2008, 08:23 AM	#15 (permalink)
4VTECN Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,818 Location: Auckland	Re: Type R Build Thread shiiiiittt....you dont muck around, will be watching this thread very closely __________________ YBOOST Civic Type R

28th May 2008, 08:52 AM	#16 (permalink)
xsiv Senior Member 6,000rpm (Max Torque) Join Date: Apr 2005 Posts: 2,391 Location: Hamilton	Re: Type R Build Thread o Man ofter reading this i want to punch they guy in the head. im sure u do too. their are some dogie people out their __________________ xsiv da6 313kw b16a

28th May 2008, 01:37 PM	#17 (permalink)
CoupeTurbo Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2007 Posts: 259 Location: Outside NZ: Australia	Re: Type R Build Thread dam you work fast haha sounds like youve got a it sorted. looks good so far

28th May 2008, 02:40 PM	#18 (permalink)
Slammmed Senior Member 6,000rpm (Max Torque) Join Date: Sep 2004 Posts: 2,383 Location: Auckland	Re: Type R Build Thread ricci bro you work fast! and i must say, all the engine bays you have worked on comes out mint as! Look forward to seeing the end result __________________ Poor uni student trying to build a weapon! Watch this space /forum/members/slammmed.html

28th May 2008, 02:55 PM	#19 (permalink)
Bananaman Senior Member 8,000rpm (B Series Redline!) Join Date: Jun 2004 Posts: 4,328 Location: Foxton Beach	Re: Type R Build Thread Nice one indeed. Will watch this as it might just pass me by your doing such a quick job on it. __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

28th May 2008, 05:07 PM	#20 (permalink)
Jason Member 700rpm (Idle) Join Date: Apr 2007 Posts: 45 Location: Auckland	Re: Type R Build Thread Looking good bro. myt have to come next door an have a look some time.

28th May 2008, 06:25 PM	#21 (permalink)
bumpd-EG Senior Member 4,000rpm (Taxi Drag) Join Date: May 2006 Posts: 650 Location: Auckland	Re: Type R Build Thread I just bought these wheels for the car, sold the standard itr wheels I dont want to keep these white I am gonna repaint them in a satin bronze or maybe gunmetal colour they are Racing Hart M6 17x7, I have always liked these wheels Last edited by bumpd-EG; 28th May 2008 at 08:49 PM.

28th May 2008, 06:31 PM	#22 (permalink)
Top Secret Senior Member 3,000rpm (Grandma Drag) Join Date: Jul 2007 Posts: 401 Location: Tauranga	Re: Type R Build Thread Wow, can't believe the amount of stuff that's gone wrong in a fairly recent car! (1996) You'd sort of be shocked if it happened to an older car, around 1990 ish, but this is ridiculous! The guy that sold it is off these forums too.. a quick browse around the For Sale section will find the thread. Good stuff for getting stuck in so quickly, very impressive! __________________ The maximum selection, the owner turns the maker. Identity of the man who know the style.

28th May 2008, 08:08 PM	#23 (permalink)
americ_ian Senior Member 18,000rpm+ Honda F1! Join Date: Jul 2004 Posts: 10,941 Location: Hamilton	Re: Type R Build Thread LOL, i cant stop laughing at that... wat is it? a rangified D series L bracket? lookin good ricci! i felt the same pain wen i aquired the ae... pulled the whole thing down and started again! .... PLus its a bonus knowing yourself wats in every knook and corner of the whole car... wiring/dodgy welds, lose bolts, broken shiz etc etc its a simple fact of buying modded cars these days i gues... __________________ Ex D16a Ex b16a, ex b18cr, ex h22a turbo, ex h2b, ex k20a.... Current: F20c!!!!!! 12.8 @ 171.88 1.7 60ft!

28th May 2008, 08:26 PM	#24 (permalink)
BLAZED_RACER Team NZH: Mod 11,000rpm (Spoon B16B!!) Join Date: Jan 2002 Posts: 9,768 Location: Tokoroa	Re: Type R Build Thread holy mother of god.. haha now who is the dodgy one.! lol... will be good to see this all cleaned up ric.

28th May 2008, 08:27 PM	#25 (permalink)
bumpd-EG Senior Member 4,000rpm (Taxi Drag) Join Date: May 2006 Posts: 650 Location: Auckland	Re: Type R Build Thread I have no idea but I have ordered another one, after searching and searching last night through here on nzhondas I found a thread relating to why the gearbox was like it is... anyway who cares its on the mend.. on a good note another part ready to be installed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Build Thread (56k..no no)	G-FX	Build Threads	348	20th December 2008 07:07 AM