itsjdm's dc2 turbo build

itsjdm · 22nd May 2008, 05:18 PM

Thought I would share my new car its a Honda Integra 93 si ,x bumped-eg's car this will not be a huge build thread but i know people like to see this kind of shit.

This week my engine is getting swapped for another b18c with low km's i have also got a skunk2 intake manifold and a tial waste gate that will be put on this weekend. I have a few other things planed for the car which i will take lots of pictures of them installed and getting installed the car also will be getting tuned at speed factor with crome next week so i will post up the dyno sheets for that.

Mods

t3/t4 T04E turbo
Super Sequential bov
Tial 38mm wastegate
3 inch downpipe/ 2.5 inch exhaust system undertank
2.5 inch piping all welded to use no joiners
600-300-60 front mounted intercooler
half size alloy radiator
Tein Full Coilover and Shocks
Brembo Slotted Disks
Spoon leads

Misses took the pictures she started to take some hard out ones i told her to stop

Brand new platinum plugs after a 5 min drive

Labeling everything and i mean everything

Taking radiator hoses off and draining coolant

Spark plugs and Leads out

Mounted catch can

Lean with it

Oil drained

Intercooler pipes off

Mani off next

SLOTEG · 22nd May 2008, 05:41 PM

i see you subscribe to the Doot!Doot! school of safety footwear!

CoupeTurbo · 22nd May 2008, 05:50 PM

sweet getting it sorted great to see. goodluck, will be watching this with interest!

Slammmed · 22nd May 2008, 05:53 PM

Will be interesting to see how much power this will make once the new engine is in and tuned. Not going to use the original gizzmo computer?

itsjdm · 22nd May 2008, 06:04 PM

will only use the gizzmo computer to get to speed factor and im pretty sure the ecus is socketed so the chips can just be changed over

americ_ian · 22nd May 2008, 06:24 PM

lol at spark plugs... awesoma tune!!!

lol working after work in winter... motivation!!

CoupeTurbo · 22nd May 2008, 07:39 PM

whos putting the engine in for ya?

itsjdm · 22nd May 2008, 08:11 PM

Quote:

Originally Posted by CoupeTurbo

whos putting the engine in for ya?

riceboy was nice enough to pm me and offer to swap it over this sunday

CoupeTurbo · 22nd May 2008, 08:45 PM

sweet good to see people helping you out... look forward to seeing the end result

itsjdm · 25th May 2008, 08:45 PM

engine got swaped over today took 9 hours had to swap and change alot of things there was lots of bolts missing in the current engine and there was some doggie az wireing in the loom which was twisted and not even cover by tape or anything

thanks to riceboy and stu

pictures to come

b16a2 · 25th May 2008, 08:50 PM

Quote:

Originally Posted by itsjdm

engine got swaped over today took 9 hours had to swap and change alot of things there was lots of bolts missing in the current engine and there was some doggie az wireing in the loom which was twisted and not even cover by tape or anything

thanks to riceboy and stu

pictures to come

3 people 9 hours to swap a b series motor.. lol

4VTECN · 25th May 2008, 08:53 PM

Quote:

Originally Posted by b16a2

3 people 9 hours to swap a b series motor.. lol

Im guessing thats too much time?

itsjdm · 25th May 2008, 09:00 PM

Quote:

Originally Posted by b16a2

3 people 9 hours to swap a b series motor.. lol

... we had to swap alot of things and fix alot of plugs u dont even no

d16a7 · 25th May 2008, 09:26 PM

hah.. weaksauce excuses.

nah but anyways strip down that b18c (that you pulled out)when you have time just to have a look at things man..

and it wouldnt surprise me with the wiring

anyways hopefully all is well!..

[QUIKdc2] · 26th May 2008, 08:18 PM

9 hours!! That thing musta been messed up!
Good luck with the build bro!!!

cough* get rid of the tinted tailights

americ_ian · 26th May 2008, 08:39 PM

its hamilton.. in that 9 hours im sure they had a few beers... right...

guys?? :-D

BLAZED_RACER · 26th May 2008, 08:41 PM

^^^whats wrong with the tinted tails???

nva2nd · 26th May 2008, 08:45 PM

Quote:

Originally Posted by BLAZED_RACER

^^^whats wrong with the tinted tails???

Jamie car is Silver, with same tail-light make-over.

Looking good Brad keep us posted.

Hayce · 26th May 2008, 08:46 PM

Quote:

Originally Posted by americ_ian

its hamilton.. in that 9 hours im sure they had a few beers... right...

guys?? :-D

Lets bloody hope so!!

Eh it's not a race, good to see you guys got there in the end

americ_ian · 26th May 2008, 08:50 PM

^^ and a proper tune to come! :-D

UR2FAT · 26th May 2008, 10:31 PM

Looking good dude. We really have to sort a Hamilton meet sometime in the next wee while. So many sweet whips in h-town I have yet to see.

CoupeTurbo · 26th May 2008, 10:44 PM

nice work. i can also say im in no way a fan of the tail lights tinted looks horrible imo but congrats to getting it going my car just started u 5 mins for the first time in a while too ... feels good haha

[QUIKdc2] · 26th May 2008, 10:46 PM

Quote:

Originally Posted by nva2nd

Jamie car is Silver, with same tail-light make-over.

Looking good Brad keep us posted.

Nah that was a 3 week phase, they are long gone now

itsjdm · 27th May 2008, 09:52 PM

right now i just need to fix a exhaust leak then its ready to be tuned on crome by speed factor this friday

itsjdm · 28th May 2008, 09:36 AM

i will post some pictures this weekend

22nd May 2008, 05:18 PM	#1 (permalink)
itsjdm Senior Member 5,000rpm (VTEC Power!) Join Date: Nov 2006 Posts: 1,105 Location: Hamilton	itsjdm's dc2 turbo build Thought I would share my new car its a Honda Integra 93 si ,x bumped-eg's car this will not be a huge build thread but i know people like to see this kind of shit. This week my engine is getting swapped for another b18c with low km's i have also got a skunk2 intake manifold and a tial waste gate that will be put on this weekend. I have a few other things planed for the car which i will take lots of pictures of them installed and getting installed the car also will be getting tuned at speed factor with crome next week so i will post up the dyno sheets for that. Mods t3/t4 T04E turbo Super Sequential bov Tial 38mm wastegate 3 inch downpipe/ 2.5 inch exhaust system undertank 2.5 inch piping all welded to use no joiners 600-300-60 front mounted intercooler half size alloy radiator Tein Full Coilover and Shocks Brembo Slotted Disks Spoon leads Misses took the pictures she started to take some hard out ones i told her to stop Brand new platinum plugs after a 5 min drive Labeling everything and i mean everything Taking radiator hoses off and draining coolant Spark plugs and Leads out Mounted catch can Lean with it Oil drained Intercooler pipes off Mani off next

22nd May 2008, 05:50 PM	#3 (permalink)
CoupeTurbo Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2007 Posts: 259 Location: Outside NZ: Australia	Re: itsjdm's dc2 turbo build sweet getting it sorted great to see. goodluck, will be watching this with interest!

22nd May 2008, 05:53 PM	#4 (permalink)
Slammmed Senior Member 6,000rpm (Max Torque) Join Date: Sep 2004 Posts: 2,383 Location: Auckland	Re: itsjdm's dc2 turbo build Will be interesting to see how much power this will make once the new engine is in and tuned. Not going to use the original gizzmo computer? __________________ Poor uni student trying to build a weapon! Watch this space /forum/members/slammmed.html

22nd May 2008, 06:04 PM	#5 (permalink)
itsjdm Senior Member 5,000rpm (VTEC Power!) Join Date: Nov 2006 Posts: 1,105 Location: Hamilton	Re: itsjdm's dc2 turbo build will only use the gizzmo computer to get to speed factor and im pretty sure the ecus is socketed so the chips can just be changed over

22nd May 2008, 06:24 PM	#6 (permalink)
americ_ian Senior Member 18,000rpm+ Honda F1! Join Date: Jul 2004 Posts: 10,941 Location: Hamilton	Re: itsjdm's dc2 turbo build lol at spark plugs... awesoma tune!!! lol working after work in winter... motivation!! __________________ Ex D16a Ex b16a, ex b18cr, ex h22a turbo, ex h2b, ex k20a.... Current: F20c!!!!!! 12.8 @ 171.88 1.7 60ft!

22nd May 2008, 07:39 PM	#7 (permalink)
CoupeTurbo Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2007 Posts: 259 Location: Outside NZ: Australia	Re: itsjdm's dc2 turbo build whos putting the engine in for ya?

22nd May 2008, 08:45 PM	#9 (permalink)
CoupeTurbo Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2007 Posts: 259 Location: Outside NZ: Australia	Re: itsjdm's dc2 turbo build sweet good to see people helping you out... look forward to seeing the end result

25th May 2008, 08:45 PM	#10 (permalink)
itsjdm Senior Member 5,000rpm (VTEC Power!) Join Date: Nov 2006 Posts: 1,105 Location: Hamilton	Re: itsjdm's dc2 turbo build engine got swaped over today took 9 hours had to swap and change alot of things there was lots of bolts missing in the current engine and there was some doggie az wireing in the loom which was twisted and not even cover by tape or anything thanks to riceboy and stu pictures to come

25th May 2008, 09:26 PM	#14 (permalink)
d16a7 Senior Member 7,000rpm (Peak Power) Join Date: Dec 2006 Posts: 3,638 Location: Auckland	Re: itsjdm's dc2 turbo build hah.. weaksauce excuses. nah but anyways strip down that b18c (that you pulled out)when you have time just to have a look at things man.. and it wouldnt surprise me with the wiring anyways hopefully all is well!.. __________________ PROJECT EJ - D Ninja

26th May 2008, 08:18 PM	#15 (permalink)
[QUIKdc2] Senior Member 8,000rpm (B Series Redline!) Join Date: Jan 2005 Posts: 4,870 Location: Tauranga	Re: itsjdm's dc2 turbo build 9 hours!! That thing musta been messed up! Good luck with the build bro!!! cough* get rid of the tinted tailights __________________ Ex - DC2 14.2 @ 155km/h \| Current - 95 GT Legacy Wagon

26th May 2008, 08:39 PM	#16 (permalink)
americ_ian Senior Member 18,000rpm+ Honda F1! Join Date: Jul 2004 Posts: 10,941 Location: Hamilton	Re: itsjdm's dc2 turbo build its hamilton.. in that 9 hours im sure they had a few beers... right... guys?? :-D __________________ Ex D16a Ex b16a, ex b18cr, ex h22a turbo, ex h2b, ex k20a.... Current: F20c!!!!!! 12.8 @ 171.88 1.7 60ft!

26th May 2008, 08:41 PM	#17 (permalink)
BLAZED_RACER Team NZH: Mod 11,000rpm (Spoon B16B!!) Join Date: Jan 2002 Posts: 9,768 Location: Tokoroa	Re: itsjdm's dc2 turbo build ^^^whats wrong with the tinted tails???

26th May 2008, 08:50 PM	#20 (permalink)
americ_ian Senior Member 18,000rpm+ Honda F1! Join Date: Jul 2004 Posts: 10,941 Location: Hamilton	Re: itsjdm's dc2 turbo build ^^ and a proper tune to come! :-D __________________ Ex D16a Ex b16a, ex b18cr, ex h22a turbo, ex h2b, ex k20a.... Current: F20c!!!!!! 12.8 @ 171.88 1.7 60ft!

26th May 2008, 10:31 PM	#21 (permalink)
UR2FAT Senior Member 8,000rpm (B Series Redline!) Join Date: Feb 2002 Posts: 5,031 Location: Hamilton	Re: itsjdm's dc2 turbo build Looking good dude. We really have to sort a Hamilton meet sometime in the next wee while. So many sweet whips in h-town I have yet to see. __________________ Japan called... they want their Domestic Market back. Ex: 93 Black DC2, 93 Yellow B20VTEC DC2, 1988 Grey EF3. Current: 94 Blue EG5 H22A

26th May 2008, 10:44 PM	#22 (permalink)
CoupeTurbo Senior Member 3,000rpm (Grandma Drag) Join Date: Dec 2007 Posts: 259 Location: Outside NZ: Australia	Re: itsjdm's dc2 turbo build nice work. i can also say im in no way a fan of the tail lights tinted looks horrible imo but congrats to getting it going my car just started u 5 mins for the first time in a while too ... feels good haha

27th May 2008, 09:52 PM	#24 (permalink)
itsjdm Senior Member 5,000rpm (VTEC Power!) Join Date: Nov 2006 Posts: 1,105 Location: Hamilton	Re: itsjdm's dc2 turbo build right now i just need to fix a exhaust leak then its ready to be tuned on crome by speed factor this friday

28th May 2008, 09:36 AM	#25 (permalink)
itsjdm Senior Member 5,000rpm (VTEC Power!) Join Date: Nov 2006 Posts: 1,105 Location: Hamilton	Re: itsjdm's dc2 turbo build i will post some pictures this weekend

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
zc turbo-build