turbo my torneo : UPDATED!! pics and story page 11 - Page 5

itekdu · 29th March 2007, 09:01 AM

yea there's two possible dude's that I'm looking at that are pretty good aye, does anyone watching know about how much action Dan charges? I found a top mount design on h-t, but have lost it again :cry:

Bananaman · 29th March 2007, 09:32 AM

What sorta build time do you expect for this project??

(had to put something up here to start watching

)

EGizzleSizzle · 29th March 2007, 09:55 AM

Quote:

Originally Posted by ItekdU

yea there's two possible dude's that I'm looking at that are pretty good aye, does anyone watching know about how much action Dan charges? I found a top mount design on h-t, but have lost it again :cry:

Jono @ Performance Metalworks FTW!

DVSCVC · 29th March 2007, 10:03 AM

I know Action Dan does some awesome work, unsure of the prices though..

itekdu · 29th March 2007, 07:37 PM

Quote:

Originally Posted by Bananaman

What sorta build time do you expect for this project??

(had to put something up here to start watching

)

I didnt even know we had a watchlist on here??

I dont really have a clue aye, hopefully the sooner the better, but we all know how this sorta shit spirals outta control

I probably need to get onto finding someone to build the engine, otherwise my block will diminish very quickly in the acid dip...

MADCIVIC · 1st April 2007, 09:34 PM

Quote:

Originally Posted by EGizzleSizzle

Quote:

Originally Posted by ItekdU

yea there's two possible dude's that I'm looking at that are pretty good aye, does anyone watching know about how much action Dan charges? I found a top mount design on h-t, but have lost it again :cry:

Jono @ Performance Metalworks FTW!

agreed, although he would prolly want the car....makes it tricky

itekdu · 2nd April 2007, 06:07 PM

Quote:

Originally Posted by MADCIVIC

Quote:

Originally Posted by EGizzleSizzle

Quote:

Originally Posted by ItekdU

yea there's two possible dude's that I'm looking at that are pretty good aye, does anyone watching know about how much action Dan charges? I found a top mount design on h-t, but have lost it again :cry:

Jono @ Performance Metalworks FTW!

agreed, although he would prolly want the car....makes it tricky

Thats no problem... I work when I want :wink:

nemesisteg · 2nd April 2007, 07:02 PM

action dans charges arent really the issue, its the time. dpends what hes got going on aye, gets into alot of other stuff aswell like freestyle bmx etc depends tho if he isnt working on other cars could be in and out reasonably quick, in theory he could fab one up in a week or two. pm me if you want his number

itekdu · 3rd May 2007, 01:46 PM

stoked, finally got the inside wiring harness where I want it. lol, howz that for a tiny update!

itekdu · 14th May 2007, 04:12 PM

Just cut my first hole in the firewall 8O for the power steering...head should with any luck be getting built up this week too...

Hayce · 4th July 2007, 02:13 PM

whats the go with this sled of yours?

itekdu · 5th July 2007, 10:48 AM

lol, I was hoping to have heard from the sleeving guys about 2 weeks ago!

BTLF3D · 5th July 2007, 11:52 AM

Quote:

Originally Posted by ItekdU

lol, I was hoping to have heard from the sleeving guys about 2 weeks ago!

rung them about it?

dee.eph · 5th July 2007, 02:21 PM

what you gona do with your old f20b?

itekdu · 5th July 2007, 04:54 PM

Quote:

Originally Posted by BTLF3D

Quote:

Originally Posted by ItekdU

lol, I was hoping to have heard from the sleeving guys about 2 weeks ago!

rung them about it?

Na, have a few calls to make tomorrow, they'l be one of them... been busy... On a happier note, I've got *most* of the wiring done, for now, just gotta do the passenger side shock tower! so stoked!

Quote:

Originally Posted by dee.eph

what you gona do with your old f20b?

keeping it, may want it in the future, and just to be a hog

itekdu · 6th July 2007, 11:15 AM

Just talked to them, have had heaps of staff off apparently, will get to the sleeving next week...

Mortarion · 8th July 2007, 05:34 PM

Quote:

Originally Posted by ItekdU

On a happier note, I've got *most* of the wiring done, for now, just gotta do the passenger side shock tower! so stoked!

Sweet, you can start on my engine bay soon then!

itekdu · 9th July 2007, 08:13 AM

Whenever ya park your car up and get it on some stands

itekdu · 9th August 2007, 10:43 AM

YAY! after 2 months, the sleevers have FINALLY told me that my blocks nearly ready... Totally not happy :evil:

Oh and James, if you're reading this, now you're living back at home, get your car on blocks and we can have a look at your wiring.

Hayce · 9th August 2007, 11:32 AM

Quote:

Originally Posted by ItekdU

YAY! after 2 months, the sleevers have FINALLY told me that my blocks nearly ready... Totally not happy :evil:

Woweewha!

I hear you there man nothings ever easy huh, you'd think its cut and dry: get quote, do job, pick up but it never seems to work that way :evil:

itekdu · 9th August 2007, 02:13 PM

Quote:

Originally Posted by Hayce

Quote:

Originally Posted by ItekdU

YAY! after 2 months, the sleevers have FINALLY told me that my blocks nearly ready... Totally not happy :evil:

Woweewha!

I hear you there man nothings ever easy huh, you'd think its cut and dry: get quote, do job, pick up but it never seems to work that way :evil:

HAHAHAHA quote!!! forgot to mention they're close enough to a grand over that too :evil: :evil:

Boostin It · 9th August 2007, 07:47 PM

colliers?

nemesisteg · 9th August 2007, 07:55 PM

shake some life into this thread booyyeeeee!!! time to roll these pages with car pr0n!! price must have been an estimate, dont you watch Target bout the guy putting a rotor in his hilux?? cant change price on a quote, only an estimate, really an engine builder should be able to accuartely quote sleeving a honda motor, surely its not the first one they have done

Hayce · 10th August 2007, 08:23 AM

Quote:

Originally Posted by ItekdU

HAHAHAHA quote!!! forgot to mention they're close enough to a grand over that too :evil: :evil:

Is it OK if I take a small amount of satisfaction that Im not the only one?

Edit: I spelt "ok" wrong wtf!

americ_ian · 10th August 2007, 09:07 AM

but btlfed said they were "cheap"

29th March 2007, 09:01 AM	#101 (permalink)
itekdu Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,794 Location: Whangarei	yea there's two possible dude's that I'm looking at that are pretty good aye, does anyone watching know about how much action Dan charges? I found a top mount design on h-t, but have lost it again :cry: __________________ John said I could be the Whangaz mod if I put it in my sig \| Will be the fastest farm hack 'round \| bebo me \| Mens Almanac

29th March 2007, 09:32 AM	#102 (permalink)
Bananaman Senior Member 8,000rpm (B Series Redline!) Join Date: Jun 2004 Posts: 4,328 Location: Foxton Beach	What sorta build time do you expect for this project?? (had to put something up here to start watching ) __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

29th March 2007, 10:03 AM	#104 (permalink)
DVSCVC Senior Member 4,000rpm (Taxi Drag) Join Date: Mar 2006 Posts: 608 Location: Hamilton	I know Action Dan does some awesome work, unsure of the prices though.. __________________ [MX LIFE] -SR20DET Powered Toyota Hiace Project X-Sports NZ - Join The Revolution @ http://www.xsportsnz.net

3rd May 2007, 01:46 PM	#109 (permalink)
itekdu Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,794 Location: Whangarei	stoked, finally got the inside wiring harness where I want it. lol, howz that for a tiny update! __________________ John said I could be the Whangaz mod if I put it in my sig \| Will be the fastest farm hack 'round \| bebo me \| Mens Almanac

14th May 2007, 04:12 PM	#110 (permalink)
itekdu Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,794 Location: Whangarei	Just cut my first hole in the firewall 8O for the power steering...head should with any luck be getting built up this week too... __________________ John said I could be the Whangaz mod if I put it in my sig \| Will be the fastest farm hack 'round \| bebo me \| Mens Almanac

2nd April 2007, 07:02 PM	#108 (permalink)
nemesisteg Senior Member 7,000rpm (Peak Power) Join Date: Nov 2005 Posts: 2,946 Location: Cambridge	action dans charges arent really the issue, its the time. dpends what hes got going on aye, gets into alot of other stuff aswell like freestyle bmx etc depends tho if he isnt working on other cars could be in and out reasonably quick, in theory he could fab one up in a week or two. pm me if you want his number

4th July 2007, 02:13 PM	#111 (permalink)
Hayce Senior Member 9,000rpm (S2000 Redline!) Join Date: May 2005 Posts: 7,036 Location: Hamilton	whats the go with this sled of yours? __________________ ....................................EK molester!..................gtrefinishers

5th July 2007, 10:48 AM	#112 (permalink)
itekdu Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,794 Location: Whangarei	lol, I was hoping to have heard from the sleeving guys about 2 weeks ago! __________________ John said I could be the Whangaz mod if I put it in my sig \| Will be the fastest farm hack 'round \| bebo me \| Mens Almanac

5th July 2007, 02:21 PM	#114 (permalink)
dee.eph Senior Member 4,000rpm (Taxi Drag) Join Date: Jul 2006 Posts: 578 Location: Auckland	what you gona do with your old f20b? __________________ Torn'yo

6th July 2007, 11:15 AM	#116 (permalink)
itekdu Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,794 Location: Whangarei	Just talked to them, have had heaps of staff off apparently, will get to the sleeving next week... __________________ John said I could be the Whangaz mod if I put it in my sig \| Will be the fastest farm hack 'round \| bebo me \| Mens Almanac

9th July 2007, 08:13 AM	#118 (permalink)
itekdu Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,794 Location: Whangarei	Whenever ya park your car up and get it on some stands __________________ John said I could be the Whangaz mod if I put it in my sig \| Will be the fastest farm hack 'round \| bebo me \| Mens Almanac

9th August 2007, 10:43 AM	#119 (permalink)
itekdu Senior Member 7,000rpm (Peak Power) Join Date: Dec 2004 Posts: 2,794 Location: Whangarei	YAY! after 2 months, the sleevers have FINALLY told me that my blocks nearly ready... Totally not happy :evil: Oh and James, if you're reading this, now you're living back at home, get your car on blocks and we can have a look at your wiring. __________________ John said I could be the Whangaz mod if I put it in my sig \| Will be the fastest farm hack 'round \| bebo me \| Mens Almanac

9th August 2007, 07:47 PM	#122 (permalink)
Boostin It Senior Member 6,000rpm (Max Torque) Join Date: Mar 2005 Posts: 1,771 Location: Auckland	colliers? __________________ 1997 Prelude SiR - 2.2 litres of n/a dohc vtec goodness 8)

9th August 2007, 07:55 PM	#123 (permalink)
nemesisteg Senior Member 7,000rpm (Peak Power) Join Date: Nov 2005 Posts: 2,946 Location: Cambridge	shake some life into this thread booyyeeeee!!! time to roll these pages with car pr0n!! price must have been an estimate, dont you watch Target bout the guy putting a rotor in his hilux?? cant change price on a quote, only an estimate, really an engine builder should be able to accuartely quote sleeving a honda motor, surely its not the first one they have done

10th August 2007, 09:07 AM	#125 (permalink)
americ_ian Senior Member 18,000rpm+ Honda F1! Join Date: Jul 2004 Posts: 10,941 Location: Hamilton	but btlfed said they were "cheap" __________________ Ex D16a Ex b16a, ex b18cr, ex h22a turbo, ex h2b, ex k20a.... Current: F20c!!!!!! 12.8 @ 171.88 1.7 60ft!