![]() |
|
| |||||||
| Build Threads Starting a build you think is worthy of it's own thread? Post in here. |
![]() |
| Thread Tools | Display Modes |
| | #1 (permalink) |
| Senior Member 7,000rpm (Peak Power) | EK9 CTR N1 Track project under development *56k slooow* In the build (and the garage) for months now, the latest attempt at Targa by a Honda is nearing completion. After much heart ache (mainly financial) I am happy to announce that we will be on the road soon. The list of mods is relatively small at this stage, as we are wanting to go as fast as we can with the current set up before changing anything. Current list of mods: NGK plugs/leads Cold air box Simota air filter 98 Spec ITR 4-1 Headers 2 1/4 inch exhaust Omori water/oil temp/oil pressure gauges Battery relocated to rear Momo T frame seats Monza 3 inch 6 point harnesses Buddy Club Racing Spec Dampers Pagid race compound brake pads Front brake cooling ducts Dunlop D98 semi slicks dry/D101 semi slick wet Interior stripped (and I mean STRIPPED) Relay box and fuse box relocated G.A.P. Rally intercom Terratrip timing/speed equipment The only thing missing from the mods list is the roll cage, and we are ready to go! Plans for future mods include: Roll cage (number ONE!!!) Buddy Club Racing Spec Condenser Bigger brakes Bigger wheels Buddy Club Spec IV cams Buddy Club P-1 Racing Vales Buddy Club Racing Spec Valve Springs and Titianium Retainers Buddy Club SpecII or Spec III exhaust Quad throttle bodies Hondata Phenolic Gasket Hondata S300 ECU Willwood brake bias controller Carbon bonnet Carbon wing Carbon mirrors Carbon door cards Enough for now! Phew! SHould go like stink I reckon! With current setup the car is running approx 47.5sec on the Taupo short track, before I/H/E. There are also plans to have this car featured in a documentary that will follow the build from a standard car to the finish line of Targa Bambina next year. I welcome any input or contributions from anyone who wants to be involved. Big thanks so far go out to: Mike @ FortyOne Automotive Shane and Zhan @ STR Custom Fabrications Abe @ EzySigns My wife( )Ian and Tyson Jemmett (legends) Tom, Frank, and JC Jase (95ITR) Sky Zhou (bgw) And anyone else who I have missed... I will be updating this page/thread as the build progresses. Cheers, Tim
__________________ www.teamfbi.co.nz |
| | |
| | #2 (permalink) |
| Senior Member 7,000rpm (Peak Power) | ![]()
__________________ www.teamfbi.co.nz |
| | |
| | #4 (permalink) |
| Senior Member 6,000rpm (Max Torque) | lookin fantastic man, good to see it finally coming together 8) i"ll be watching this thread with intrest
__________________ The EK9--Buy My Car!--garage-sale-buddyclub-spoon-alex motorsports- EVERYTHING MUST GO! |
| | |
| | #5 (permalink) |
| Senior Member 7,000rpm (Peak Power) | Thanks man. Still got that a pillar trim if you haven't got sick of waiting for me ops: Send it up to the address you gave?
__________________ www.teamfbi.co.nz |
| | |
| | #7 (permalink) |
| Senior Member 7,000rpm (Peak Power) | Will post more when I have time. Busy!!!
__________________ www.teamfbi.co.nz |
| | |
| | #8 (permalink) |
| Senior Member 7,000rpm (Peak Power) Join Date: Aug 2003
Posts: 2,830
Location: Auckland | Keep up the good work Tim ... looking forward to seeing it on the racetrack doing what it does best ... making fast lap times ... The car's looking real good and you've put a lot of effort and thoughts into the build ... I am sure as your driving ability progress you'll outdrive the Car's potential sooner than you think ... Good luck with the rest of the build ... p.s. I really need to find time to get my ass over to your place for a chat and pick up those trim pieces .. sorry I've been busy. |
| | |
| | #9 (permalink) | |
| Senior Member 6,000rpm (Max Torque) | Quote:
__________________ The EK9--Buy My Car!--garage-sale-buddyclub-spoon-alex motorsports- EVERYTHING MUST GO! | |
| | |
| | #10 (permalink) |
| Senior Member 7,000rpm (Peak Power) | Thanks for your comments and advice so far Tom. We finally got our company sorted out, and so we are up and running and have a little time/money spare at last. Just waiting for one debtor's payment and it's off to have a cage! AT LAST!!! Is definitely all go for NIMM...
__________________ www.teamfbi.co.nz |
| | |
| | #12 (permalink) |
| Senior Member 7,000rpm (Peak Power) | Thanks Ali. I hope all goes well more than you I bet!
__________________ www.teamfbi.co.nz |
| | |
| | #15 (permalink) | |
| Senior Member 7,000rpm (Peak Power) | Quote:
More pics up tonight. Please excuse my filthy garage...
__________________ www.teamfbi.co.nz | |
| | |
| | #16 (permalink) |
| Senior Member 7,000rpm (Peak Power) | Here are some more pics. Engine bay: ![]() Centre console, Omori gauges: ![]() Relocated relay box (not quite finished), fuse box from under steering column will go next to it, and then both will be covered by glove box cut to fit ![]() DYI brake ducting (go the holesaw!) and TradeMe Special 15x7 wheels (only 5.5kg each!!!) ![]() Remote oil filter. Looks as though is great for cooling - after 10 laps of Taupo, oil temp only 65-70deg... ![]() Apply up to four layers of vinyl on to your car to advance your reputation multiplier... Seriously, the black part is vinyl, not paint...![]() Racing team logo (as if anyone cares), think it looks good though... ![]() All for now, cage is booked for twwo weeks time, more when it's finished (and maybe some video)...
__________________ www.teamfbi.co.nz |
| | |
| | #20 (permalink) |
| Senior Member 5,000rpm (VTEC Power!) | Mint car mate. Hehehe i know what you mean about the layers of sign writting, my car and support van have up to 6 layers in sum points. Oh and you dont really need to worry about getting anymore power out of your car for targa, it comes down to how crazy you drive it. I did targa bambina this year in my ITR and i was sitting just above the middle of the pack, but then in the last 4 stages my codriver took over (Targa Expert- Used to drive pace car) and he maned to get my car up to a 7th and 9th placing in 2 of the stages. So yer bloody good car man. See you in targa
__________________ www.yorkmotorsport.co.nz www.badboy.co.nz www.nzkw.com www.theblackhawk.co.nz www.queenb.co.nz (Online home shoping) |
| | |
| | #21 (permalink) | |
| Senior Member 7,000rpm (Peak Power) | Quote:
__________________ www.teamfbi.co.nz | |
| | |
| | #22 (permalink) |
| Senior Member 5,000rpm (VTEC Power!) | who is doing your cage?
__________________ www.yorkmotorsport.co.nz www.badboy.co.nz www.nzkw.com www.theblackhawk.co.nz www.queenb.co.nz (Online home shoping) |
| | |
| | #23 (permalink) |
| Senior Member 7,000rpm (Peak Power) | Shane at STR Fabrications in Henderson. Are you familiar with his work?
__________________ www.teamfbi.co.nz |
| | |
| | #24 (permalink) |
| Senior Member 5,000rpm (VTEC Power!) | Nope. Im a Road Race & Rally guy. But in saying that im a henderson guy to lol
__________________ www.yorkmotorsport.co.nz www.badboy.co.nz www.nzkw.com www.theblackhawk.co.nz www.queenb.co.nz (Online home shoping) |
| | |
| | #25 (permalink) |
| Senior Member 7,000rpm (Peak Power) | I suppose it was destined to be him beacuse he's known my uncle for ten years... Was recommended by Paul Ohlsen @ Ohlsen Developments, and found out he knew my uncle after that! He built my cousin's (Matt Thompson) speedway car I think. Correct me if I'm wrong anyone out there...
__________________ www.teamfbi.co.nz |
| | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|