CRX Drag car. 56K beware! Pics added (07-01-07) - Page 2

Bananaman · 9th January 2007, 10:15 AM

Kinda related to the drag project, up top I mentioned this madness al start with a del sol.

Here is an update of it now

Bananaman · 18th January 2007, 02:47 PM

So which pistons to go into the drag car, the one on the left are aries and the one on the right is IB wisco

Wish the old boy would just get it running

nzcivicracer · 18th January 2007, 03:01 PM

Quote:

Originally Posted by Bananaman

Wish the old boy would just get it running

Tell him to hurry up with the ZC too

I'd go the Wiseco pistons.....

Glassjaw · 27th February 2007, 05:14 PM

Any updates for us folks watching the build thread??

Bananaman · 28th February 2007, 07:58 AM

Unfortunatly not, I have been rather busy at work and haven't had time to check back in with dad as yet. He likes to keep it low key so doesn't do regular updates.

All I know is the chassis that he brought need to be modified to accomodate the dry sump pump as it sits outside the crank pulley line and clashes with the chassis rail in the front.

See here where the two circles are there needs to be a 5 - 10mm rebate made in the chassis rail

Other than that I think the old man is working on the Brothers ZC at the moment.

Bananaman · 28th May 2007, 12:01 PM

Alrighty, have a wee update on the drag project.

The old man informs me ALL pieces are now there and ready for final assembly.

New Block Girdle will be arriving from the states within the week and then engine will then be sent off to the engine builders to be fully assembled.

It is soooooo close now I can't wait. Dad has found an engine builder in aussie to put the thing together who currently runs the worlds fastest Lexus. So lets just hope that this thing does the numbers he is expecting or better

Will post up some more pics as they come in as he is keen to get this thing finished and on the track.

SINISTR · 28th May 2007, 08:10 PM

Sweeet!

whos the builder?

are you comming over to perth anytime soon?

I can't wait to see this thing fire up - will be there cameras rolling!

Bananaman · 29th May 2007, 08:20 AM

Quote:

Originally Posted by SINISTR

Sweeet!

whos the builder?

are you comming over to perth anytime soon?

I can't wait to see this thing fire up - will be there cameras rolling!

He was pretty hush hush about the engine builder. Just told me that they built the worlds fastest Lexus and were located in Perth.

crx_bob · 29th May 2007, 09:07 AM

Damn thats one impressive old man and one nice looking project!
you a lucky guy

VTAKYO · 15th June 2008, 02:44 AM

Bump. Moved to Build Threads section.

UPDATES?!

Bananaman · 22nd June 2008, 02:21 PM

Since this hasn't been updated in a while. Dad is waiting on 1 piece then the engine gets assembled and fitted for good.

If there is anyone out there that can get there hands on a 5 girdle block gaurd please let me know. Dad has been trying for AGGGEEESSSS now trying to get hold of a function 7 item. Once that is found it is all go.

3rdGenCivic · 2nd July 2008, 11:07 PM

that is mean.

btw what happened to the white crx i am looking for that model probably in a little cube now right?

Bananaman · 3rd July 2008, 07:25 AM

Nope, it was given to Scully at Beyond.

Was to good to crush.

madDC4 · 6th July 2008, 04:32 PM

Someone bought that white crx off Scully a while ago, after Scully closed the workshop. Had a H22a right?

Bananaman · 6th July 2008, 05:03 PM

Nope. That was the other Beyond car.

It will be around someplace.

9th January 2007, 10:15 AM	#26 (permalink)
Bananaman Senior Member 7,000rpm (Peak Power) Join Date: Jun 2004 Posts: 4,097 Location: Foxton Beach	Kinda related to the drag project, up top I mentioned this madness al start with a del sol. Here is an update of it now __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

18th January 2007, 02:47 PM	#27 (permalink)
Bananaman Senior Member 7,000rpm (Peak Power) Join Date: Jun 2004 Posts: 4,097 Location: Foxton Beach	So which pistons to go into the drag car, the one on the left are aries and the one on the right is IB wisco Wish the old boy would just get it running __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

27th February 2007, 05:14 PM	#29 (permalink)
Glassjaw Senior Member 4,000rpm (Taxi Drag) Join Date: Jun 2003 Posts: 769 Location: Wellington	Any updates for us folks watching the build thread?? __________________ www.purepwnage.com

28th February 2007, 07:58 AM	#30 (permalink)
Bananaman Senior Member 7,000rpm (Peak Power) Join Date: Jun 2004 Posts: 4,097 Location: Foxton Beach	Unfortunatly not, I have been rather busy at work and haven't had time to check back in with dad as yet. He likes to keep it low key so doesn't do regular updates. All I know is the chassis that he brought need to be modified to accomodate the dry sump pump as it sits outside the crank pulley line and clashes with the chassis rail in the front. See here where the two circles are there needs to be a 5 - 10mm rebate made in the chassis rail Other than that I think the old man is working on the Brothers ZC at the moment. __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

28th May 2007, 12:01 PM	#31 (permalink)
Bananaman Senior Member 7,000rpm (Peak Power) Join Date: Jun 2004 Posts: 4,097 Location: Foxton Beach	Alrighty, have a wee update on the drag project. The old man informs me ALL pieces are now there and ready for final assembly. New Block Girdle will be arriving from the states within the week and then engine will then be sent off to the engine builders to be fully assembled. It is soooooo close now I can't wait. Dad has found an engine builder in aussie to put the thing together who currently runs the worlds fastest Lexus. So lets just hope that this thing does the numbers he is expecting or better Will post up some more pics as they come in as he is keen to get this thing finished and on the track. __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

28th May 2007, 08:10 PM	#32 (permalink)
SINISTR Senior Member 3,000rpm (Grandma Drag) Join Date: May 2005 Posts: 399 Location: Outside NZ: Australia	Sweeet! whos the builder? are you comming over to perth anytime soon? I can't wait to see this thing fire up - will be there cameras rolling! __________________ [GENONE] - 1983 Ballade Sports, AF1000029, Auto, 1.5l EW5000052. [BANDIT] - 1984 Ballade Sports,D16A3 [SINISTR] - 1991 Si CRX Im in PERTH. WESTERN AUSTRALIA.

29th May 2007, 09:07 AM	#34 (permalink)
crx_bob Senior Member 6,000rpm (Max Torque) Join Date: Mar 2007 Posts: 1,986 Location: Rangiora	Damn thats one impressive old man and one nice looking project! you a lucky guy

15th June 2008, 02:44 AM	#35 (permalink)
VTAKYO Team NZH: Retired 11,000rpm (Spoon B16B!!) Join Date: Jul 2004 Posts: 8,848 Location: Christchurch	Re: CRX Drag car. 56K beware! Pics added (07-01-07) Bump. Moved to Build Threads section. UPDATES?! __________________ ¤ HYDR8 @ Trance.NU :: Parkour - Because Sidewalks Suck ¤ ¤ Afterhours FM :: Redefining The Media ¤

22nd June 2008, 02:21 PM	#36 (permalink)
Bananaman Senior Member 7,000rpm (Peak Power) Join Date: Jun 2004 Posts: 4,097 Location: Foxton Beach	Re: CRX Drag car. 56K beware! Pics added (07-01-07) Since this hasn't been updated in a while. Dad is waiting on 1 piece then the engine gets assembled and fitted for good. If there is anyone out there that can get there hands on a 5 girdle block gaurd please let me know. Dad has been trying for AGGGEEESSSS now trying to get hold of a function 7 item. Once that is found it is all go. __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

2nd July 2008, 11:07 PM	#37 (permalink)
3rdGenCivic Member 700rpm (Idle) Join Date: Jan 2006 Posts: 89 Location: New Plymouth	Re: CRX Drag car. 56K beware! Pics added (07-01-07) that is mean. btw what happened to the white crx i am looking for that model probably in a little cube now right?

3rd July 2008, 07:25 AM	#38 (permalink)
Bananaman Senior Member 7,000rpm (Peak Power) Join Date: Jun 2004 Posts: 4,097 Location: Foxton Beach	Re: CRX Drag car. 56K beware! Pics added (07-01-07) Nope, it was given to Scully at Beyond. Was to good to crush. __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

6th July 2008, 04:32 PM	#39 (permalink)
madDC4 Senior Member 5,000rpm (VTEC Power!) Join Date: May 2007 Posts: 962 Location: Auckland	Re: CRX Drag car. 56K beware! Pics added (07-01-07) Someone bought that white crx off Scully a while ago, after Scully closed the workshop. Had a H22a right? __________________ It was chunky grapefruit JAM you wanted ay ! http://nzhondas.com/forum/members/maddc4.html

6th July 2008, 05:03 PM	#40 (permalink)
Bananaman Senior Member 7,000rpm (Peak Power) Join Date: Jun 2004 Posts: 4,097 Location: Foxton Beach	Re: CRX Drag car. 56K beware! Pics added (07-01-07) Nope. That was the other Beyond car. It will be around someplace. __________________ It is better to have a Honda and no Money, than it is to have Money and no Honda.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode