NZHondas.com - View Single Post - Any one do BRE or equivalent obd0 PR3 chipping???

bmgjet · 14th July 2008, 03:43 PM

Just tried another cable on another ecu iv chipped and changed from auto. HL-2303 works also, Its on trademe as a "usb to serial (3.3V logic)" from the seller zeus_dong.

Just a bit of a mission connecting the pins but would be easy if you use a female serial connector on the ecu where i just used a jumper off a computer and cramed all the wires into that. then put if over the pin.

14th July 2008, 03:43 PM	#34 (permalink)
bmgjet Senior Member 6,000rpm (Max Torque) Join Date: Jul 2007 Posts: 2,147 Location: New Plymouth	Re: Any one do BRE or equivalent obd0 PR3 chipping??? Just tried another cable on another ecu iv chipped and changed from auto. HL-2303 works also, Its on trademe as a "usb to serial (3.3V logic)" from the seller zeus_dong. Just a bit of a mission connecting the pins but would be easy if you use a female serial connector on the ecu where i just used a jumper off a computer and cramed all the wires into that. then put if over the pin.