NZHondas.com - View Single Post

OhSoSlow · 4th July 2008, 11:42 AM

put a couple of flywheel bolts back on, then get a power bar between them, so you can have one person holding that (or jammed into the ground) then swing away on the pulley bolt..

4th July 2008, 11:42 AM	#3 (permalink)
OhSoSlow Senior Member 4,000rpm (Taxi Drag) Join Date: Jan 2006 Posts: 777 Location: Auckland	Re: Undoing crankpullly bolt put a couple of flywheel bolts back on, then get a power bar between them, so you can have one person holding that (or jammed into the ground) then swing away on the pulley bolt.. __________________ www.slipstreamperformance.co.nz