Quote:
Originally Posted by Green Machine  Id say your be crazy not to run cam gears on a b20 with itr cams. It would be so close from what I have read. |
I always thought it was pretty common knowledge that camgears on ITR cams (on an ITR block) was considered a waste of money unless you had decked or milled the bottom end or head.
Same goes with a stock ITR head on a stock b20 bottom end from my experience, both gears are on 0 degrees, playing with them made no difference.
Quote:
|
Originally Posted by Coupe-R I woulda thought easy in the 9.2:1-9.5:1 area of compression max on stock bottom end |
Stock b20b is 9.6:1, then you throw a vtec head on.