So really the EG collars would be the most likely to fit, although this doesn't take into account the holes on the chassis, although visually comparing the 2 on the spoon website it appears, the long ends (which I figure slide into the chassis side holes and the varying lengths are to do with how deep the hole is before it hits the threaded portion) are the same from EK to EG, although that is only judging by the 2 pictures here:
and they could be the same pictures, although it appears they aren't.
Mac, if I buy the EG collars and test them (will just be a matter of sliding them into the holes on the chassis) and for some reason they don't fit would it be possible to return them? but I am guessing they will fit.
More in stock today!
NEW! Blox EK Subframe rigid collars (each kit is soo light!) $155
Blox Universal Oil Block Adapters $55
Blox Gun Metal Original 5spd Shift Knobs $69
Blox 1.5 Blue 20's Aluminum Lug Nuts $125
Hi Mac! Any Blox 3" JDM flanges?
| 1997 Nissan Silvia S14 K's | 1996 Honda Civic Turbo B16a/GT35r | Power FC for sale! PM me for details! |
Negative - I think only Bisimoto do 'em and as Sam found out, they take forever =[ This may be it:
2 bolt flange, 3.0 [B2BF250] - $24.99 : Bisimoto Engineering, Where Efficiency Meets Technological Perfection
It's Spring so we've thrown together a few package deals, most of which include 'springs'. Smart eh!
Blox Street Spec Coilovers (Fork)
Blox Adjustable Endlinks
Blox Rear Lower Control Arms (Fork)
Blox Front Camber Kit
Blox Rear Camber Kit
Blox Roll Center Adjusters
Blox Rigid Body Spacers
Delivered with Ocean $1680
Delivered with Air $1960
Upgrade to Competition coilovers +$120
Intake System Package
Blox VIII Intake Manifold
Blox Intake Filter Kit
Blox Thermal Intake Manifold Gasket
With Ocean shipping $465
With Air Freight $499
Add Blox Injectors B/D/H Series:
(OBDII Cars require harness - $55)
Add Blox Throttle Body (66-74m) +$319
(Surface mounted manifold not included)
Engine Head Package
Blox Camshafts of your choice
Blox Valve Springs
Blox Titanium Retainers
Blox Cam Gears
Shipped with Ocean $1555
Shipped with Air $1635
More Blox product updates - just their Vtec Solenoid covers however:
Hey all - From Jan 1st 2013 (gosh that seems years away but it's only 3+ months!) Blox pricing is going UP. Most brands prices slowly creep up with inflation, natural raw material price fluctuations and so on, so they've given all their dealers 90 days notice in advance so we can let you know.
We don't know how much they will go up, but last bump was about 10%. We absorbed most of that by being shrewd with shipping and asking for bulk pricing, but we can't take another 10% on the chin.
So the upshot is, the US$ is really, really good and whilst the prices stay down I recommend sorting out what you require soon, or starting a Laybuy! We'll lock in the price and you're good to go!
In Stock Now:
Suspension / Chassis
Blox Roll Center adjusters for EG / EK / DC2 - $225 delivered
Blox Adjustable Endlinks (Finally!) $65 delivered
Engine / Exhaust
Blox Billet Oil Filler Cap - Red / Silver / Black - $45 delivered
Blox 3" Velocity Stack intake kits - $79 delivered
Blox 2.5" JDM exhaust flanges $35ea delivered
Blox universal oil blox adapter - Black - $89 delivered
Blox Fuel Pressure Regulator - Black or Red - $69 delivered
Blox Gunmetal 5spd Knob 1.5 $69 delivered
Blox Neo Chrome "original series" 1.5 5spd Knob $79 delivered
Blox Gauges - Water Temp (Deg F) $99 delivered
Blox Gauges - Oil Pressure $99 delivered
Blox DA Integra and 88-00 Civic / CRX single bend short shifter - $80 delivered
Black wheel nuts, 1.5, 20's $119 deliveredPurple wheel nuts, 1.5, 16's $99 delivered
And another bit of good news! After 4 months out of stock, rear camber kits will be in stock in about 2 weeks (here!)
They are $125 delivered! 5 will be in stock and ones or order will be sent straight out!
Some more goodies from Blox:
Reverse Lockout Lever Adapter - for 12x1.25 shift knobs - $17 + Courier
The BLOX Racing reverse lockout adapter allows its 12x1.25 line of shift knobs to be used with the OEM reverse lockout lever. Now enthusiasts can complete their shift knob installation by attaching the reverse lockout lever and shift boot assembly to the underside of the shift knob. Available in anodized black or silver.
S2000 Clutch Master Cylinder Adapter - $20 + Courier
The BLOX Racing S2000 Clutch Master Cylinder Adapter allows enthusiasts to directly bolt on a clutch master cylinder from a Honda S2000 inside their Civic or Integra engine bay. Using the S2000 CMC helps complete your wire-tuck engine bay. Available in anodized black or silver.
BLOX Racing Billet Battery Tiedown - $36 + Courier
(Red, Black, Blue, Silver, Gold, Purple, Raw Aluminum)
BLOX Racing’s billet battery tiedown not only looks great, but your battery will be securely positioned during spirited driving or racing.
Velocity stack and filter my good man, got them in stock?
So there's about a million waiting for Blox intake kits - they are not in stock with Blox yet (still) =[ But today they updated what has come in to stock:
Titanium Nuts (Yes!)
Front Camber Kits - Standard and Competition Series
Oil Filter Block Adapters
Boost and Oil Gauges
(Amongst other items already in stock)
In stock today, get them before Xmas!
Thermal Intake Gaskets
B18CR / B18C5 / B16A $65 delivered
B18C1 $65 delivered
K20A $65 delivered
^^^ any h22a ones?
UNDER CONSTRUCTION H22A EF SEDAN
Blox Blox Intake Manifold for Honda Integra DC2 - Fortyone Automotive Limited how much is that shipped mac? also how long of a wait would that be?
OK you can benefit a little with going ocean freight if you want to wait (8 weeks) but air may suit best:
With Ocean $329
With Air $351
There's still 0 intake kits available.
There's lots waiting for them!
Despite Blox shifting over NY, they still have 0 stock.
Performance Air Filter Kits