LinkBack URL
About LinkBacks$55, and you can take the cash AND the respect. To some people, thats worth more.Originally Posted by spooned
 |  | |||
 |
|  |
$55, and you can take the cash AND the respect. To some people, thats worth more.
Bevan wouldn't even get out of bed for $55
FixedBevan wouldn't even get out of bed for $55/hr
Jase you can forget about what I quoted you for the catch can, cause I got a new hourly rate
2003 Accord Euro R CL7
Mugen/J's Racing/Spoon/BuddyClub/WORK Wheels/Apexi/Loop...
Crisp cash! Crisp!
Friends > Cars
Living the dream
Something i whipped up one day ;-).
No.Fat.Chicks
Now operating via Samsung galaxy SII
????? Did you weld the deck of the truck. Anything made lately
[QUOTE=Trivium;1692473] Can't stand the line "One female owner".
Guess it's never been serviced, the mags are curbed and the clutch is fucked then?QUOTE]
Sure did...truck turned up as a cab chassis and was told to build a deck for it... 6weeks later the beast was born...
Got a few things in the works at the moment, may have to remind myself to take a few more photos if any one is interested?
Aidan.
No.Fat.Chicks
Now operating via Samsung galaxy SII
Dude thats fuck'n kool man good on you.
[QUOTE=Trivium;1692473] Can't stand the line "One female owner".
Guess it's never been serviced, the mags are curbed and the clutch is fucked then?QUOTE]
This is what I have been making up over the past few days; for the most part, it's finished. Just need to weld in some injector bosses, which I will probably make myself after I pick up my lathe (hopefully) later this week
Manifold to fit AE111 Quad Throttles onto a B18CR
quads1.jpg
quads2.jpg
quads3.jpg
quads4.jpg
Any reason for the choice of material used?
^ who cares man honestly. thats fucken kool i wish i had a welder
[QUOTE=Trivium;1692473] Can't stand the line "One female owner".
Guess it's never been serviced, the mags are curbed and the clutch is fucked then?QUOTE]
mild steel is cheap, the filler rods are cheap, and the guy I got the flanges from only does mild steel
All up it cost me a total of $44 (not including the throttles). If I went stainless it would be easily 3x that. And I dont have an AC welder, so Aluminium is out of the question
Should have the turbo manifold done in the next few days as well
Mean man. So wish i had a welder. Fuuuuuuuck i want a ac//dc tig soooo bad. One day
[QUOTE=Trivium;1692473] Can't stand the line "One female owner".
Guess it's never been serviced, the mags are curbed and the clutch is fucked then?QUOTE]
I wouldn't bother getting an AC//DC welder, the massive difference in cost isn't really justified unless you are doing A LOT of aluminiumMean man. So wish i had a welder. Fuuuuuuuck i want a ac//dc tig soooo bad
You would be surprised at the cost of some DC Tig machines these days, mine cost me less then my plasma cutter. You dont need a big machine either, mine goes up to 170 amps but I have never used more then 130
you mean any alloy!! Yes you can DC TIG alloy using CO2 and a lotof screwing around, but why would you bother??? A really good chinese AC/DC TIG isn't really that much $$$ these days and they do a damn good job - that's what we use (from PMT Motorsport) and it makes welds as good as anything American... and cost half as much, has as good a warranty and guarenteed spares supply if required.
When it comes to welding, if you are serious about it, spend the money up front and you won't be disappointed. It's a lot harder to do a good job with a crap tool.
If you only need to weld alloy once every few months, farm the work out and spend the money on an even better DC welder!
Every home should have one!
I would be welding alloy and stainless alot dont mind a chinese welder have used them before and they are good.
Any recommendation?? havent been in the welding seen for a while but can get trade price so that one plus.
[QUOTE=Trivium;1692473] Can't stand the line "One female owner".
Guess it's never been serviced, the mags are curbed and the clutch is fucked then?QUOTE]
A sparky that fixes our welders at work reckons that the new WeldTech Tig welders are doing well at all the workshops he goes too, they are Chinese but have been in the game for years and years and are apparently producing some good welders now, only like $1300 too. 180amp DC Tig Millers are pieces of shit, frequently being fixed, might as well not even have high frequency and lay a shit bead compared to the other welders in the workshop like the Ceboras. Have used Ceboras with no complaints and they are about half the price of the miller.
Cheers man realy helpful
[QUOTE=Trivium;1692473] Can't stand the line "One female owner".
Guess it's never been serviced, the mags are curbed and the clutch is fucked then?QUOTE]
I made/customised this bonnet :
this is my work :
Carving NW69 Mask NWC - YouTube
finished article :
does that count?
Last edited by JoKer; 8th March 2012 at 08:32 PM. Reason: (i didnt MAKE a bonnet)
Nearly did till i seen your from Dannevirke!
Carving is impressive!
least you know where I am!
Love your carving work Jared.
JoKer from clubsub?
am late to the party but farrrrrk that harness bar is spectacular, as is the overflow-catch can combo.
loving this thread more and more
i hear pitstop are doing the mean exhaust jobs these days
Posting Permissions
Reply With Quote
