Andrews Space Shuttle Build

[WingIt]

That steering wheel is pretty much exactly what I want


As for engine, nah unless this one dies (only done 155,000kms) then wont be changing anything.
Have done the intake as the filter was dirty and blah, makes it sound better, nothing much more than that will happen
Would much rather get the Type R a bit quicker, still need to get headers for that and get a tune, as its making 127kw running very rich.

[Green Machine]

ahh ok. I suppose thats why I dont want to get a daily driver haha. Would turn into a 2nd project.

[trend.whore]

Woodgrain ftl.. deepdish !!

[offset]

woodgrain gets a thumbsup from me keepin it old school!
I really wanted to do the minibus shuttle project a while back. couldn't find what you have found! Keep it in good nick and do it up nice man, so rare, manual fuel injected and 2 wheel drive!! geez cant believe you found one!

is it rusty at all?

it would look sick even just slammed on some DC2 rims for the time being until you find the 'nice' offset's you're looking for

[CRZYSi]

nice lil project/daily ... hah the thing with daily is that you somehow spend money on it .. well i did on mine lolz .....

there used to be a shuttle (the newer one then what you have) slammmed on some 15" driving around Mangere (so probably choppped) and the camber on that thing was unreal


ps: maybe you can try and fit a J's racing lip

[WingIt]

woodgrain gets a thumbsup from me keepin it old school!
I really wanted to do the minibus shuttle project a while back. couldn't find what you have found! Keep it in good nick and do it up nice man, so rare, manual fuel injected and 2 wheel drive!! geez cant believe you found one!

is it rusty at all?

it would look sick even just slammed on some DC2 rims for the time being until you find the 'nice' offset's you're looking for

Yea I was trying to do a semi oldschool look.

It took a while to find this one, it was a trade in at a dealer in ChCh and I spotted it on trademe.
Has a few rust bubbles in the drivers door but nothing to major.

I may just roll on steelies till I find some decent wheels, or might flag offset altogether and get some nice lates 80's Mugen Wheels

nice lil project/daily ... hah the thing with daily is that you somehow spend money on it .. well i did on mine lolz .....

there used to be a shuttle (the newer one then what you have) slammmed on some 15" driving around Mangere (so probably choppped) and the camber on that thing was unreal


ps: maybe you can try and fit a J's racing lip

Yea I seem to be spend all my money on this recently, oh well

My aim is to get it quite low, realistcally wont be tucking in the back as there isnt much room at all, and to get no rubbing I would have to replace the shocks will solid metal tubes so I dont get travel.

J's lip, would look cool, but too much $$

This thing currently owes me less than $2000

[XPLOIT]

Some Mugen MR5's will look the part!

There was one in CHCH with NO SPRINGS, that camber was insane!

[offset]

get MR5's and get them hard polished! chrome looking MR5's slammed will look sickk!

[WingIt]

I was thinking more along the lines of Mugen NR-10 if I could find them or whatever these ones are called

[CRZYSi]

J's lip, would look cool, but too much $$

Ive got a facelift CRX j's racing front lip brand new you can have for $200 (thats dam cheap)

[Logger]

Ive got a facelift CRX j's racing front lip brand new you can have for $200 (thats dam cheap)

Curvature of the bumper is a bit different so its highly likely that it wont fit.

[XPLOIT]

I was thinking more along the lines of Mugen NR-10 if I could find them or whatever these ones are called

Some on Trade Me last time I checked......

[WingIt]

Yea there were for $250, but I was broke (still am)

[XPLOIT]

Here you go.

In CHCH too so I could check it out

http://www.trademe.co.nz/Trade-Me-Mo...-163011343.htm

[XPLOIT]

Yea there were for $250, but I was broke (still am)

Ahhh beaten

[mung]

they're abit small being 14's - car is too big... NR10 is 15's will be mint for it,

[Reaper_2000]

ill be watching this with interest as i just got a shuttle a few weeks ago

[chrisr]

me to, haha lots of people are getting shuttles now

[offset]

those NR10's have some special 'limited edition' centre caps, and seem to be in extremely good tidy condition for wheels of that age! I'd take them if they were what I was after ... Doesn't matter whether or not they are 14's! Just get em, and slam it

[WingIt]

I would but I have -$50 till thursday, wont be in the market for wheels for at least a month if not more.

I would really want 15x6.5" NR10 if I could find them

[XPLOIT]

Save for longer and get some flat black Watanabe's!!!

[mung]

NR10s never came out with special edition centre caps..

those NR10's have some special 'limited edition' centre caps, and seem to be in extremely good tidy condition for wheels of that age! I'd take them if they were what I was after ... Doesn't matter whether or not they are 14's! Just get em, and slam it

[offset]

you seen the ones in the Trademe listing? I didn't think they did either, but they are there. maybe not original ones?

[mung]

if your talking about these: http://www.trademe.co.nz/Trade-Me-Mo...p-69066748.htm

then no, they're not NR10's - they are CF-48's

these are NR10's - http://images.hondatuningmagazine.co...mugen_nr10.jpg

and these are the race version of the NR-10 - NR10R - http://www.charlescharlescharles.com...ugennr10r2.jpg

anyways, shit sorry for the pointless mugen wheel spam.

you seen the ones in the Trademe listing? I didn't think they did either, but they are there. maybe not original ones?

[Hayce]

Look like the top of an old masport mower... Get some rota drifts on it, balla!